名前

       virt-get-kernel - Extract kernel and ramdisk from guests

書式

        virt-get-kernel [--options] -d domname

        virt-get-kernel [--options] -a disk.img

説明

       This program extracts the kernel and initramfs from a guest.

       The format of the disk image is automatically detected unless you specify it by using the
       --format option.

       In the case where the guest contains multiple kernels, the one with the highest version
       number is chosen.  To extract arbitrary kernels from the disk image, see guestfish(1).  To
       extract the entire "/boot" directory of a guest, see virt-copy-out(1).

オプション

       --help
           ヘルプを表示します。

       -a file
       --add file
           仮想マシンからディスクイメージの file を追加します。

           ディスクイメージの形式は自動的に検出されます。強制的に特定の形式を使用するには
           --format オプションを使用します。

       -a URI
       --add URI
           Add a remote disk.  The URI format is compatible with guestfish.  See "ADDING REMOTE
           STORAGE" in guestfish(1).

       --blocksize 512
       --blocksize 4096
           This parameter sets the sector size of the disk image added with -a option and is
           ignored for libvirt guest added with -d option.  See also "guestfs_add_drive_opts" in
           guestfs(3).

       --colors
       --colours
           Use ANSI colour sequences to colourize messages.  This is the default when the output
           is a tty.  If the output of the program is redirected to a file, ANSI colour sequences
           are disabled unless you use this option.

       -c URI
       --connect URI
           libvirt を使用していると、指定された URI に接続します。  省略すると、デフォルトの
           libvirt ハイパーバイザーに接続します。

           ゲストのブロックデバイスを直接指定していると（(-a)）、libvirt は何も使用されません。

       -d guest
       --domain guest
           名前付きの libvirt 仮想マシンからすべてのディスクを追加します。  名前の代わりに仮想マ
           シンの UUID を使用できます。

       --echo-keys
           When prompting for keys and passphrases, virt-get-kernel normally turns echoing off so
           you cannot see what you are typing.  If you are not worried about Tempest attacks and
           there is no one else in the room you can specify this flag to see what you are typing.

       --format raw|qcow2|..
       --format auto
           The default for the -a option is to auto-detect the format of the disk image.  Using
           this forces the disk format for the -a option on the command line.

           仮想マシンのディスクイメージが信頼できない raw 形式である場合、 ディスク形式を指定する
           ためにこのオプションを使用すべきです。 これにより、悪意のある仮想マシンにより起こり得
           る セキュリティ問題を回避できます (CVE-2010-3851)。

       --key SELECTOR
           Specify a key for LUKS, to automatically open a LUKS device when using the inspection.

           --key NAME:key:KEY_STRING
           --key UUID:key:KEY_STRING
           --key all:key:KEY_STRING
               "NAME" is the libguestfs device name (eg. "/dev/sda1").  "UUID" is the device
               UUID.  "all" means try the key against any encrypted device.

               Use the specified "KEY_STRING" as passphrase.

           --key NAME:file:FILENAME
           --key UUID:file:FILENAME
           --key all:file:FILENAME
               Read the passphrase from FILENAME.

           --key NAME:clevis
           --key UUID:clevis
           --key all:clevis
               Attempt passphrase-less unlocking for the device with Clevis, over the network.
               Please refer to "ENCRYPTED DISKS" in guestfs(3) for more information on network-
               bound disk encryption (NBDE).

               Note that if any such option is present on the command line, QEMU user networking
               will be automatically enabled for the libguestfs appliance.

       --keys-from-stdin
           Read key or passphrase parameters from stdin.  The default is to try to read
           passphrases from the user by opening /dev/tty.

           If there are multiple encrypted devices then you may need to supply multiple keys on
           stdin, one per line.

       --machine-readable
       --machine-readable=format
           このオプションは、他のプログラムにより解析されるときに、よりマシンに易しい出力を作成す
           るために使用されます。以下の "マシン可読な出力" 参照。

       -o directory
       --output directory
           This option specifies the output directory where kernel and initramfs from the guest
           are written.

           If not specified, the default output is the current directory.

       --prefix prefix
           This option specifies a prefix for the extracted files.

           If a prefix is specified, then there will be a dash ("-") after the prefix and before
           the rest of the file name; for example, a kernel in the guest like
           "vmlinuz-3.19.0-20-generic" is saved as "mydistro-vmlinuz-3.19.0-20-generic" when the
           prefix is "mydistro".

           See also --unversioned-names.

       -q
       --quiet
           Don’t print ordinary progress messages.

       --unversioned-names
           This option affects the destination file name of extracted files.

           If enabled, files will be saved locally just with the base name; for example, kernel
           and ramdisk in the guest like "vmlinuz-3.19.0-20-generic" and
           "initrd.img-3.19.0-20-generic" are saved respectively as "vmlinuz" and "initrd.img".

           See also --prefix.

       -v
       --verbose
           デバッグ用の冗長なメッセージを有効にします。

       -V
       --version
           バージョン番号を表示して、終了します。

       --wrap
           Wrap error, warning, and informative messages.  This is the default when the output is
           a tty.  If the output of the program is redirected to a file, wrapping is disabled
           unless you use this option.

       -x  libguestfs API 呼び出しのトレースを有効にします。

マシン可読な出力

       The --machine-readable option can be used to make the output more machine friendly, which
       is useful when calling virt-get-kernel from other programs, GUIs etc.

       Use the option on its own to query the capabilities of the virt-get-kernel binary.
       Typical output looks like this:

        $ virt-get-kernel --machine-readable
        virt-get-kernel

       A list of features is printed, one per line, and the program exits with status 0.

       It is possible to specify a format string for controlling the output; see "ADVANCED
       MACHINE READABLE OUTPUT" in guestfs(3).

環境変数

       For other environment variables which affect all libguestfs programs, see "ENVIRONMENT
       VARIABLES" in guestfs(3).

終了ステータス

       このプログラムは、成功すると 0 を、エラーがあると 0 以外を返します。

関連項目

       guestfs(3), guestfish(1), guestmount(1), virt-copy-out(1), virt-drivers(1),
       http://libguestfs.org/.

著者

       Richard W.M. Jones http://people.redhat.com/~rjones/

COPYRIGHT

       Copyright (C) 2013-2023 Red Hat Inc.

LICENSE

BUGS

       To get a list of bugs against libguestfs, use this link:
       https://bugzilla.redhat.com/buglist.cgi?component=libguestfs&product=Virtualization+Tools

       To report a new bug against libguestfs, use this link:
       https://bugzilla.redhat.com/enter_bug.cgi?component=libguestfs&product=Virtualization+Tools

       When reporting a bug, please supply:

       •   The version of libguestfs.

       •   Where you got libguestfs (eg. which Linux distro, compiled from source, etc)

       •   Describe the bug accurately and give a way to reproduce it.

       •   Run libguestfs-test-tool(1) and paste the complete, unedited output into the bug
           report.