NAME

       vgconvert — Change volume group metadata format

SYNOPSIS

       vgconvert position_args
           [ option_args ]

DESCRIPTION

       vgconvert  is  no  longer  a part of LVM.  It was removed along with support for the LVM1 format.  Use an
       older version of LVM to convert VGs from the LVM1 format to LVM2.

USAGE

       vgconvert VG ...
           [ -f|--force ]
           [ -M|--metadatatype lvm2 ]
           [    --labelsector Number ]
           [    --bootloaderareasize Size[m|UNIT] ]
           [    --pvmetadatacopies 0|1|2 ]
           [    --metadatasize Size[m|UNIT] ]
           [    --reportformat basic|json ]
           [ COMMON_OPTIONS ]

       Common options for lvm:
           [ -d|--debug ]
           [ -h|--help ]
           [ -q|--quiet ]
           [ -t|--test ]
           [ -v|--verbose ]
           [ -y|--yes ]
           [    --commandprofile String ]
           [    --config String ]
           [    --devices PV ]
           [    --devicesfile String ]
           [    --driverloaded y|n ]
           [    --journal String ]
           [    --lockopt String ]
           [    --longhelp ]
           [    --nohints ]
           [    --nolocking ]
           [    --profile String ]
           [    --version ]

OPTIONS

       --bootloaderareasize Size[m|UNIT]
              Reserve space for the bootloader between the LVM metadata area and the first PE.   The  bootloader
              area  is  reserved  for bootloaders to embed their own data or metadata; LVM will not use it.  The
              bootloader area begins where the first PE would otherwise be located.  The first PE is  moved  out
              by  the  size  of  the  bootloader area, and then moved out further if necessary to match the data
              alignment.  The start of the bootloader area is  always  aligned,  see  also  --dataalignment  and
              --dataalignmentoffset.  The bootloader area may be larger than requested due to the alignment, but
              it's never less than the requested size.  To see the bootloader area start and size of an existing
              PV use pvs -o +pv_ba_start,pv_ba_size.

       --commandprofile String
              The  command profile to use for command configuration.  See lvm.conf(5) for more information about
              profiles.

       --config String
              Config settings for the command. These override lvm.conf(5) settings.  The  String  arg  uses  the
              same format as lvm.conf(5), or may use section/field syntax.  See lvm.conf(5) for more information
              about config.

       -d|--debug ...
              Set debug level. Repeat from 1 to 6 times to increase the detail of messages sent to the log  file
              and/or syslog (if configured).

       --devices PV
              Restricts  the  devices  that  are visible and accessible to the command.  Devices not listed will
              appear to be missing. This option can be repeated, or accepts a comma separated list  of  devices.
              This overrides the devices file.

       --devicesfile String
              A  file  listing  devices  that  LVM  should use.  The file must exist in /etc/lvm/devices/ and is
              managed with the lvmdevices(8) command.  This overrides the  lvm.conf(5)  devices/devicesfile  and
              devices/use_devicesfile settings.

       --driverloaded y|n
              If set to no, the command will not attempt to use device-mapper.  For testing and debugging.

       -f|--force ...
              Override various checks, confirmations and protections.  Use with extreme caution.

       -h|--help
              Display help text.

       --journal String
              Record information in the systemd journal.  This information is in addition to information enabled
              by the lvm.conf log/journal setting.  command: record  information  about  the  command.   output:
              record the default command output.  debug: record full command debugging.

       --labelsector Number
              By  default  the PV is labelled with an LVM2 identifier in its second sector (sector 1). This lets
              you use a different sector near  the  start  of  the  disk  (between  0  and  3  inclusive  -  see
              LABEL_SCAN_SECTORS in the source). Use with care.

       --lockopt String
              Used to pass options for special cases to lvmlockd.  See lvmlockd(8) for more information.

       --longhelp
              Display long help text.

       --metadatasize Size[m|UNIT]
              The approximate amount of space used for each VG metadata area.  The size may be rounded.

       -M|--metadatatype lvm2
              Specifies  the type of on-disk metadata to use.  lvm2 (or just 2) is the current, standard format.
              lvm1 (or just 1) is no longer used.

       --nohints
              Do not use the hints file to locate devices for PVs. A command may read more devices to  find  PVs
              when  hints  are  not  used.  The command will still perform standard hint file invalidation where
              appropriate.

       --nolocking
              Disable locking. Use with caution, concurrent commands may produce incorrect results.

       --profile String
              An alias for --commandprofile or --metadataprofile, depending on the command.

       --pvmetadatacopies 0|1|2
              The number of metadata areas to set aside on a PV for storing VG metadata.  When 2,  one  copy  of
              the  VG metadata is stored at the front of the PV and a second copy is stored at the end.  When 1,
              one copy of the VG metadata is stored at the front of the  PV.   When  0,  no  copies  of  the  VG
              metadata  are  stored on the given PV.  This may be useful in VGs containing many PVs (this places
              limitations on the ability to use vgsplit later.)

       -q|--quiet ...
              Suppress output and log messages. Overrides --debug and --verbose.  Repeat once to  also  suppress
              any prompts with answer 'no'.

       --reportformat basic|json
              Overrides  current output format for reports which is defined globally by the report/output_format
              setting in lvm.conf(5).  basic is the original format with columns and rows.   If  there  is  more
              than one report per command, each report is prefixed with the report name for identification. json
              produces report output in JSON format. See lvmreport(7) for more information.

       -t|--test
              Run in test mode. Commands will not  update  metadata.   This  is  implemented  by  disabling  all
              metadata  writing  but  nevertheless  returning  success to the calling function. This may lead to
              unusual error messages in multi-stage operations if a tool relies  on  reading  back  metadata  it
              believes has changed but hasn't.

       -v|--verbose ...
              Set  verbose level. Repeat from 1 to 4 times to increase the detail of messages sent to stdout and
              stderr.

       --version
              Display version information.

       -y|--yes
              Do not prompt for confirmation interactively but always assume the answer yes.  Use  with  extreme
              caution.  (For automatic no, see -qq.)

VARIABLES

       VG     Volume Group name.  See lvm(8) for valid names.

       String See the option description for information about the string content.

       Size[UNIT]
              Size is an input number that accepts an optional unit.  Input units are always treated as base two
              values, regardless of capitalization, e.g. 'k' and 'K' both refer to 1024.  The default input unit
              is  specified  by  letter,  followed by |UNIT.  UNIT represents other possible input units: b|B is
              bytes, s|S is sectors of 512 bytes, k|K is KiB, m|M is MiB, g|G is GiB, t|T is TiB,  p|P  is  PiB,
              e|E  is  EiB.  (This should not be confused with the output control --units, where capital letters
              mean multiple of 1000.)

ENVIRONMENT VARIABLES

       See lvm(8) for information about environment  variables  used  by  lvm.   For  example,  LVM_VG_NAME  can
       generally be substituted for a required VG parameter.

SEE ALSO

       lvm(8), lvm.conf(5), lvmconfig(8), lvmdevices(8),

       pvchange(8), pvck(8), pvcreate(8), pvdisplay(8), pvmove(8), pvremove(8), pvresize(8), pvs(8), pvscan(8),

       vgcfgbackup(8), vgcfgrestore(8), vgchange(8), vgck(8), vgcreate(8), vgconvert(8), vgdisplay(8),
       vgexport(8), vgextend(8), vgimport(8), vgimportclone(8), vgimportdevices(8), vgmerge(8), vgmknodes(8),
       vgreduce(8), vgremove(8), vgrename(8), vgs(8), vgscan(8), vgsplit(8),

       lvcreate(8), lvchange(8), lvconvert(8), lvdisplay(8), lvextend(8), lvreduce(8), lvremove(8), lvrename(8),
       lvresize(8), lvs(8), lvscan(8),

       lvm-fullreport(8), lvm-lvpoll(8), blkdeactivate(8), lvmdump(8),

       dmeventd(8), lvmpolld(8), lvmlockd(8), lvmlockctl(8), cmirrord(8), lvmdbusd(8), fsadm(8),

       lvmsystemid(7), lvmreport(7), lvmraid(7), lvmthin(7), lvmcache(7)