Ubuntu Manpage: curl_url_set

Provided by: libcurl4-doc_8.9.1-2ubuntu2.1_all

NAME

       curl_url_set - set a URL part

SYNOPSIS

       #include <curl/curl.h>

       CURLUcode curl_url_set(CURLU *url,
                              CURLUPart part,
                              const char *content,
                              unsigned int flags);

DESCRIPTION

       The  url  handle  to work on, passed in as the first argument, must be a handle previously
       created by curl_url(3) or curl_url_dup(3).

       This function sets or updates individual URL components, or parts, held by the URL  object
       the handle identifies.

       The  part  argument  should  identify  the  particular URL part (see list below) to set or
       change, with content pointing to a null-terminated string with the new contents  for  that
       URL  part.  The  contents  should be in the form and encoding they would use in a URL: URL
       encoded.

       When setting a part in the URL object that was previously already  set,  it  replaces  the
       data that was previously stored for that part with the new content.

       The  caller  does not have to keep content around after a successful call as this function
       copies the content.

       Setting a part to a NULL pointer removes that part's contents from the CURLU handle.

       This function has an 8 MB maximum length limit for all provided  input  strings.   In  the
       real  world,  excessively long fields in URLs cause problems even if this function accepts
       them.

       When setting or updating contents of individual URL parts,  curl_url_set(3)  might  accept
       data that would not be otherwise possible to set in the string when it gets populated as a
       result of a full URL parse. Beware. If done so, extracting a full URL later on  from  such
       components might render an invalid URL.

       The flags argument is a bitmask with independent features.

PARTS

CURLUPART_URL
Allows the full URL of the handle to be replaced. If the handle already is
populated with a URL, the new URL can be relative to the previous.

When successfully setting a new URL, relative or absolute, the handle contents is
replaced with the components of the newly set URL.

Pass a pointer to a null-terminated string to the url parameter. The string must
point to a correctly formatted "RFC 3986+" URL or be a NULL pointer. The URL parser
only understands and parses the subset of URLS that are "hierarchical" and
therefore contain a :// separator - not the ones that are normally specified with
only a colon separator.

By default this API only parses URLs using schemes for protocols that are supported
built-in. To make libcurl parse URLs generically even for schemes it does not know
about, the CURLU_NON_SUPPORT_SCHEME flags bit must be set. Otherwise, this
function returns CURLUE_UNSUPPORTED_SCHEME for URL schemes it does not recognize.

Unless CURLU_NO_AUTHORITY is set, a blank hostname is not allowed in the URL.

CURLUPART_SCHEME
Scheme cannot be URL decoded on set. libcurl only accepts setting schemes up to 40
bytes long.

CURLUPART_USER
If only the user part is set and not the password, the URL is represented with a
blank password.

CURLUPART_PASSWORD
If only the password part is set and not the user, the URL is represented with a
blank user.

CURLUPART_OPTIONS
The options field is an optional field that might follow the password in the
userinfo part. It is only recognized/used when parsing URLs for the following
schemes: pop3, smtp and imap. This function however allows users to independently
set this field.

CURLUPART_HOST
The hostname. If it is International Domain Name (IDN) the string must then be
encoded as your locale says or UTF-8 (when WinIDN is used). If it is a bracketed
IPv6 numeric address it may contain a zone id (or you can use CURLUPART_ZONEID).

Note that if you set an IPv6 address, it gets ruined and causes an error if you
also set the CURLU_URLENCODE flag.

Unless CURLU_NO_AUTHORITY is set, a blank hostname is not allowed to set.

CURLUPART_ZONEID
If the hostname is a numeric IPv6 address, this field can also be set.

CURLUPART_PORT
The port number cannot be URL encoded on set. The given port number is provided as
a string and the decimal number in it must be between 0 and 65535. Anything else
returns an error.

CURLUPART_PATH
If a path is set in the URL without a leading slash, a slash is prepended
automatically.

CURLUPART_QUERY
The query part gets spaces converted to pluses when asked to URL encode on set with
the CURLU_URLENCODE bit.

If used together with the CURLU_APPENDQUERY bit, the provided part is appended on
the end of the existing query.

The question mark in the URL is not part of the actual query contents.

CURLUPART_FRAGMENT
The hash sign in the URL is not part of the actual fragment contents.

FLAGS

The flags argument is zero, one or more bits set in a bitmask.

CURLU_APPENDQUERY
Can be used when setting the CURLUPART_QUERY component. The provided new part is
then appended at the end of the existing query - and if the previous part did not
end with an ampersand (&), an ampersand gets inserted before the new appended part.

When CURLU_APPENDQUERY is used together with CURLU_URLENCODE, the first '=' symbol
is not URL encoded.

CURLU_NON_SUPPORT_SCHEME
If set, allows curl_url_set(3) to set a non-supported scheme. It then of course
cannot know if the provided scheme is a valid one or not.

CURLU_URLENCODE
When set, curl_url_set(3) URL encodes the part on entry, except for scheme, port
and URL.

When setting the path component with URL encoding enabled, the slash character is
skipped.

The query part gets space-to-plus converted before the URL conversion is applied.

This URL encoding is charset unaware and converts the input in a byte-by-byte
manner.

CURLU_DEFAULT_SCHEME
If set, allows the URL to be set without a scheme and then sets that to the default
scheme: HTTPS. Overrides the CURLU_GUESS_SCHEME option if both are set.

CURLU_GUESS_SCHEME
If set, allows the URL to be set without a scheme and it instead "guesses" which
scheme that was intended based on the hostname. If the outermost subdomain name
matches DICT, FTP, IMAP, LDAP, POP3 or SMTP then that scheme is used, otherwise it
picks HTTP. Conflicts with the CURLU_DEFAULT_SCHEME option which takes precedence
if both are set.

If guessing is not allowed and there is no default scheme set, trying to parse a
URL without a scheme returns error.

If the scheme ends up set as a result of guessing, i.e. it is not actually present
in the parsed URL, it can later be figured out by using the CURLU_NO_GUESS_SCHEME
flag when subsequently getting the URL or the scheme with curl_url_get(3).

CURLU_NO_AUTHORITY
If set, skips authority checks. The RFC allows individual schemes to omit the host
part (normally the only mandatory part of the authority), but libcurl cannot know
whether this is permitted for custom schemes. Specifying the flag permits empty
authority sections, similar to how file scheme is handled.

CURLU_PATH_AS_IS
When set for CURLUPART_URL, this skips the normalization of the path. That is the
procedure where libcurl otherwise removes sequences of dot-slash and dot-dot etc.
The same option used for transfers is called CURLOPT_PATH_AS_IS(3).

CURLU_ALLOW_SPACE
If set, the URL parser allows space (ASCII 32) where possible. The URL syntax does
normally not allow spaces anywhere, but they should be encoded as %20 or '+'. When
spaces are allowed, they are still not allowed in the scheme. When space is used
and allowed in a URL, it is stored as-is unless CURLU_URLENCODE is also set, which
then makes libcurl URL encode the space before stored. This affects how the URL is
constructed when curl_url_get(3) is subsequently used to extract the full URL or
individual parts. (Added in 7.78.0)

CURLU_DISALLOW_USER
If set, the URL parser does not accept embedded credentials for the CURLUPART_URL,
and instead returns CURLUE_USER_NOT_ALLOWED for such URLs.

PROTOCOLS

       This functionality affects all supported protocols

EXAMPLE

       int main(void)
       {
         CURLUcode rc;
         CURLU *url = curl_url();
         rc = curl_url_set(url, CURLUPART_URL, "https://example.com", 0);
         if(!rc) {
           /* change it to an FTP URL */
           rc = curl_url_set(url, CURLUPART_SCHEME, "ftp", 0);
         }
         curl_url_cleanup(url);
       }

AVAILABILITY

       Added in curl 7.78.0

RETURN VALUE

       Returns  a  CURLUcode error value, which is CURLUE_OK (0) if everything went fine. See the
       libcurl-errors(3) man page for the full list with descriptions.

       The input string passed to curl_url_set(3) must  be  shorter  than  eight  million  bytes.
       Otherwise this function returns CURLUE_MALFORMED_INPUT.

       If this function returns an error, no URL part is set.