Provided by: libsane-common_1.3.0-1_all 
NAME
sane - Scanner Access Now Easy: API for accessing scanners
DESCRIPTION
SANE is an application programming interface (API) that provides standardized access to any raster image
scanner hardware. The standardized interface makes it possible to write just one driver for each scanner
device instead of one driver for each scanner and application.
While SANE is primarily targeted at a UNIX environment, the standard has been carefully designed to make
it possible to implement the API on virtually any hardware or operating system.
This manual page provides a summary of the information available about SANE.
If you have trouble getting your scanner detected, read the PROBLEMS section.
TERMINOLOGY
An application that uses the SANE interface is called a SANE frontend. A driver that implements the SANE
interface is called a SANE backend. A meta backend provides some means to manage one or more other
backends.
SOFTWARE PACKAGES
The package sane-backends contains backends, documentation, networking support, and the command line
frontend scanimage(1). The frontends xscanimage(1), xcam(1), and scanadf(1) are included in the package
sane-frontends. Both packages can be downloaded from the SANE homepage (http://www.sane-project.org/).
Information about other frontends and backends can also be found on the SANE homepage.
GENERAL INFORMATION
The following sections provide short descriptions and links to more information about several aspects of
SANE. A name with a number in parenthesis (e.g. sane-dll(5)) points to a manual page. In this case
man 5 sane-dll will display the page. Entries like /usr/share/doc/libsane/README are references to text
files that were copied to the SANE documentation directory (/usr/share/doc/libsane/) during installation.
Everything else is a URL to a resource on the web.
SANE homepage
Information on all aspects of SANE including a tutorial and a link to the SANE FAQ can be found on the
SANE homepage: http://www.sane-project.org/.
SANE device lists
The SANE device lists contain information about the status of SANE support for a specific device. If
your scanner is not listed there (either supported or unsupported), please contact us. See section HOW
CAN YOU HELP SANE for details. There are lists for specific releases of SANE, for the current
development version and a search engine: http://www.sane-project.org/sane-supported-devices.html. The
lists are also installed on your system at /usr/share/doc/libsane/.
SANE mailing list
There is a mailing list for the purpose of discussing the SANE standard and its implementations:
sane-devel. Despite its name, the list is not only intended for developers, but also for users. There
are also some more lists for special topics. However, for users, sane-devel is the right list. How to
subscribe and unsubscribe: http://www.sane-project.org/mailing-lists.html.
SANE IRC channel
The IRC (Internet Relay Chat) channel #sane can be found on the Freenode network (irc.libera.chat).
It's for discussing SANE problems, talking about development and general SANE related chatting. Before
asking for help, please read the other documentation mentioned in this manual page. The channel's topic
is also used for announcements of problems with SANE infrastructure (mailing lists, web server, etc.).
Compiling and installing SANE
Look at /usr/share/doc/libsane/README and the os-dependent README files for information about compiling
and installing SANE.
SCSI configuration
For information about various systems and SCSI controllers see sane-scsi(5).
USB configuration
For information about USB configuration see sane-usb(5).
FRONTENDS AND MISCELLANEOUS PROGRAMS
scanimage
Command-line frontend. See scanimage(1).
saned
SANE network daemon that allows remote clients to access image acquisition devices available on the
local host. See saned(8).
sane-find-scanner
Command-line tool to find SCSI and USB scanners and determine their UNIX device files. See
sane-find-scanner(1).
Also, have a look at the sane-frontends package (which includes xscanimage(1), xcam(1), and scanadf(1))
and the frontend information page at http://www.sane-project.org/sane-frontends.html.
BACKENDS FOR SCANNERS
abaton
Supports Abaton flatbed scanners such as the Scan 300/GS (8bit, 256 levels of gray) and the Scan 300/S
(black and white, untested). See sane-abaton(5) for details.
agfafocus
Supports AGFA Focus scanners and the Siemens S9036 (untested). See sane-agfafocus(5) for details.
apple
Supports Apple flatbed scanners including the following scanners: AppleScanner, OneScanner and
ColorOneScanner. See sane-apple(5) for details.
artec
Supports several Artec/Ultima SCSI flatbed scanners as well as the BlackWidow BW4800SP and the Plustek
19200S. See sane-artec(5) for details.
artec_eplus48u
Supports the Artec E+ 48U scanner and re-badged models like Tevion MD 9693, Medion MD 9693, Medion MD
9705 and Trust Easy Webscan 19200. See sane-artec_eplus48u(5) for details.
as6e
Supports the Artec AS6E parallel port interface scanner. See sane-as6e(5) for details.
avision
Supports several Avision based scanners including the original Avision scanners (like AV 630, AV 620,
...) as well as the HP ScanJet 53xx and 74xx series, Fujitsu ScanPartner, some Mitsubishi and Minolta
film-scanners. See sane-avision(5) for details.
bh
Supports Bell+Howell Copiscan II series document scanners. See sane-bh(5) for details.
canon
Supports the CanoScan 300, CanoScan 600, and CanoScan 2700F SCSI flatbed scanners. See sane-canon(5)
for details.
canon630u
Supports the CanoScan 630u and 636u USB scanners. See sane-canon630u(5) for details.
canon_dr
Supports the Canon DR-Series ADF SCSI and USB scanners. See sane-canon_dr(5) for details.
canon_lide70
Supports the CanoScan LiDE 70 and 600 USB scanners. See sane-canon_lide70(5) for details.
canon_pp
Supports the CanoScan FB330P, FB630P, N340P and N640P parallel port scanners. See sane-canon_pp(5) for
details.
cardscan
Support for Corex Cardscan USB scanners. See sane-cardscan(5) for details.
coolscan coolscan2 coolscan3
Supports Nikon Coolscan film-scanners. See sane-coolscan(5), sane-coolscan2(5) and sane-coolscan3(5)
for details.
epjitsu
Supports Epson-based Fujitsu USB scanners. See sane-epjitsu(5) for details.
epson
Old driver for Epson SCSI, parallel port and USB flatbed scanners. See sane-epson(5) for details but
try epson2 first.
epson2
Newer driver for Epson SCSI, parallel port, network and USB flatbed scanners (try this before epson
which is outdated). See sane-epson2(5) for details.
escl
Supports scanners through the eSCL protocol. See sane-escl(5) for details.
fujitsu
Supports most Fujitsu SCSI and USB, flatbed and adf scanners. See sane-fujitsu(5) for details.
genesys
Supports several scanners based on the Genesys Logic GL646, GL841, GL843, GL847 and GL124 chips like
the Medion 6471 and Hewlett-Packard 2300c. See sane-genesys(5) for details.
gt68xx
Supports scanners based on the Grandtech GT-6801 and GT-6816 chips like the Artec Ultima 2000 and
several Mustek BearPaw CU and TA models.
Some Genius, Lexmark, Medion, Packard Bell, Plustek, and Trust scanners are also supported. See
sane-gt68xx(5) for details.
hp
Supports Hewlett-Packard ScanJet scanners which utilize SCL (Scanner Control Language by HP). See
sane-hp(5) for details.
hpsj5s
Supports the Hewlett-Packard ScanJet 5S scanner. See sane-hpsj5s(5) for details.
hp3500
Supports the Hewlett-Packard ScanJet 3500 series. See sane-hp3500(5) for details.
hp3900
Supports the Hewlett-Packard ScanJet 3900 series. See sane-hp3900(5) for details.
hp4200
Supports the Hewlett-Packard ScanJet 4200 series. See sane-hp4200(5) for details.
hp5400
Supports the Hewlett-Packard ScanJet 54XXC series. See sane-hp5400(5) for details.
hpljm1005
Supports the Hewlett-Packard LaserJet M1005 scanner. See sane-hpljm1005(5) for details.
hs2p
Supports the Ricoh IS450 family of SCSI scanners. See sane-hs2p(5) for details.
ibm
Supports some IBM and Ricoh SCSI scanners. See sane-ibm(5) for details.
kodak
Supports some large Kodak scanners. See sane-kodak(5) for details.
kodakaio
Supports Kodak AiO printer/scanners. See sane-kodakaio(5) for details.
kvs1025
Supports Panasonic KV-S102xC scanners. See sane-kvs1025(5) for details.
leo
Supports the LEO S3 and the Across FS-1130, which is a re-badged LEO FS-1130 scanner. See sane-leo(5)
for details.
lexmark
Supports the Lexmark X1100 series of USB scanners. See sane-lexmark(5) for details.
lexmark_x2600
Supports the Lexmark X2600 series of USB scanners. See sane-lexmark_x2600(5) for details.
ma1509
Supports the Mustek BearPaw 1200F USB flatbed scanner. See sane-ma1509(5) for details.
magicolor
Supports the KONICA MINOLTA magicolor 1690MF multi-function printer/scanner/fax. See sane-magicolor(5)
for details.
matsushita
Supports some Panasonic KVSS high speed scanners. See sane-matsushita(5) for details.
microtek
Supports "second generation" Microtek scanners with SCSI-1 command set. See sane-microtek(5) for
details.
microtek2
Supports some Microtek scanners with a SCSI-2 command set. See sane-microtek2(5) for details.
mustek
Supports most Mustek SCSI flatbed scanners including the Paragon and ScanExpress series and the 600 II
N and 600 II EP (non-SCSI). Some Trust scanners are also supported. See sane-mustek(5) for details.
mustek_pp
Supports Mustek parallel port flatbed scanners. See sane-mustek_pp(5) for details.
mustek_usb
Supports some Mustek ScanExpress USB flatbed scanners. See sane-mustek_usb(5) for details.
mustek_usb2
Supports scanners using the SQ113 chipset like the Mustek BearPaw 2448 TA Pro USB flatbed scanner. See
sane-mustek_usb2(5) for details.
nec
Supports the NEC PC-IN500/4C SCSI scanner. See sane-nec(5) for details.
niash
Supports the Agfa Snapscan Touch and the HP ScanJet 3300c, 3400c, and 4300c USB flatbed scanners. See
sane-niash(5) for details.
p5
Supports the Primax PagePartner. See sane-p5(5) for details.
pie
Supports Pacific Image Electronics (PIE) and Devcom SCSI flatbed scanners. See sane-pie(5) for details.
pixma
Supports Canon PIXMA MP series (multi-function devices), Canon imageCLASS series (laser devices), Canon
MAXIFY series and some Canon CanoScan series. See sane-pixma(5) for details.
plustek
Supports USB flatbed scanners that use the National Semiconductor LM983[1/2/3] chipset aka Merlin.
Scanners using this LM983x chips include some models from Plustek, KYE/Genius, Hewlett-Packard, Mustek,
Umax, Epson, and Canon. See sane-plustek(5) for details.
plustek_pp
Supports Plustek parallel port flatbed scanners using the Plustek ASIC P96001, P96003, P98001 and
P98003, which includes some models from Plustek, KYE/Genius, Primax. See sane-plustek_pp(5) for
details.
ricoh
Supports the Ricoh flatbed scanners IS50 and IS60. See sane-ricoh(5) for details.
ricoh2
Supports the Ricoh flatbed scanners: SG-3100SNw, SP-100SU, and SP-111SU. See sane-ricoh2(5) for
details.
s9036
Supports Siemens 9036 flatbed scanners. See sane-s9036(5) for details.
sceptre
Supports the Sceptre S1200 flatbed scanner. See sane-sceptre(5) for details.
sharp
Supports Sharp SCSI scanners. See sane-sharp(5) for details.
sm3600
Supports the Microtek ScanMaker 3600 USB scanner. See sane-sm3600(5) for details.
sm3840
Supports the Microtek ScanMaker 3840 USB scanner. See sane-sm3840(5) for details.
snapscan
Supports AGFA SnapScan flatbed scanners including some which are rebadged to other brands. See
sane-snapscan(5) for details.
sp15c
Supports the Fujitsu FCPA ScanPartner 15C flatbed scanner. See sane-sp15c(5) for details.
st400
Supports the Siemens ST400 and ST800. See sane-st400(5) for details.
tamarack
Supports Tamarack Artiscan flatbed scanners. See sane-tamarack(5) for details.
teco1 teco2 teco3
Supports some TECO scanners, usually sold under the Relisys, Trust, Primax, Piotech, Dextra names. See
sane-teco1(5), sane-teco2(5) and sane-teco3(5) for details.
u12
Supports USB flatbed scanners based on Plustek's ASIC 98003 (parallel-port ASIC) and a GeneSys Logics'
USB-parport bridge chip like the Plustek OpticPro U(T)12. See sane-u12(5) for details.
umax
Supports UMAX-SCSI-scanners and some Linotype Hell SCSI-scanners. See sane-umax(5) for details.
umax_pp
Supports Umax parallel port flatbed scanners and the HP 3200C. See sane-umax_pp(5) for details.
umax1200u
Supports the UMAX Astra 1220U (USB) flatbed scanner (and also the UMAX Astra 2000U, sort of). See
sane-umax1220u(5) for details.
xerox_mfp
Supports multiple Samsung-based Samsung, Xerox, and Dell scanners. See sane-xerox_mfp(5) for details.
Also, have a look at the backend information page at
http://www.sane-project.org/sane-supported-devices.html and the list of projects in
/usr/share/doc/libsane/PROJECTS.
BACKENDS FOR DIGITAL CAMERAS
dc210
Supports the Kodak DC210 Digital Camera. See sane-dc210(5).
dc240
Supports the Kodak DC240 Digital Camera. See dc240(5).
dc25
Supports Kodak DC20/DC25 Digital Cameras. See dc25(5).
dmc
Supports the Polaroid Digital Microscope Camera. See dmc(5).
gphoto2
Supports digital cameras supported by the gphoto2 library package. (See http://www.gphoto.org for more
information and a list of supported cameras.) Gphoto2 supports over 140 different camera models.
However, please note that more development and testing is needed before all of these cameras will be
supported by SANE backend. See gphoto2(5).
qcam
Supports Connectix QuickCam cameras. See qcam(5).
stv680
Supports webcams with a stv680 chip. See stv680(5) for details.
Also, have a look at the backend information page at
http://www.sane-project.org/sane-supported-devices.html and the list of projects in
/usr/share/doc/libsane/PROJECTS.
MISCELLANEOUS BACKENDS
dll
Implements a SANE backend that provides access to an arbitrary number of other SANE backends by dynamic
loading. See sane-dll(5).
net
The SANE network daemon saned(8) provides access to scanners located on different computers in
connection with the sane-net(5) backend. See saned(8).
pnm
PNM image reader pseudo-backend. The purpose of this backend is primarily to aid in debugging of SANE
frontends. See sane-pnm(5).
pint
Supports scanners that use the PINT (Pint Is Not Twain) device driver. The PINT driver is being
actively developed on the OpenBSD platform, and has been ported to a few other *NIX-like operating
systems. See sane-pint(5).
test
Tests frontends and the SANE installation. It provides test pictures and various test options. See
sane-test(5).
v4l
Provides generic access to video cameras and similar equipment using the V4L (Video for Linux) API. See
sane-v4l(5).
Also, have a look at the backend information page at
http://www.sane-project.org/sane-supported-devices.html and the list of projects in
/usr/share/doc/libsane/PROJECTS.
CHANGING THE TOP-LEVEL BACKEND
By default, all SANE backends (drivers) are loaded dynamically by the sane-dll meta backend. If you have
any questions about the dynamic loading, read sane-dll(5). SANE frontends can also be linked to other
backends directly by copying or linking a backend to libsane.so in /usr/lib/x86_64-linux-gnu/sane.
DEVELOPER'S DOCUMENTATION
It's not hard to write a SANE backend. It can take some time, however. You should have basic knowledge of
C and enough patience to work through the documentation and find out how your scanner works. Appended is
a list of some documents that help to write backends and frontends.
The SANE standard defines the application programming interface (API) that is used to communicate between
frontends and backends. It can be found at http://sane-project.gitlab.io/standard/ .
There is some more information for programmers in /usr/share/doc/libsane/backend-writing.txt. Most of
the internal SANE routines (sanei) are documented using doxygen: http://www.sane-project.org/sanei/.
Before a new backend or frontend project is started, have a look at /usr/share/doc/libsane/PROJECTS for
projects that are planned or not yet included into the SANE distribution and at our bug-tracking system:
http://www.http://www.sane-project.org/bugs.html.
There are some links on how to find out about the protocol of a scanner:
http://www.meier-geinitz.de/sane/misc/develop.html.
If you start writing a backend or frontend or any other part of SANE, please contact the sane-devel
mailing list for coordination so that work is not duplicated.
FILES
/etc/sane.d/*.conf
The backend configuration files.
/usr/lib/x86_64-linux-gnu/sane/libsane-*.a
The static libraries implementing the backends.
/usr/lib/x86_64-linux-gnu/sane/libsane-*.so
The shared libraries implementing the backends (present on systems that support dynamic loading).
/usr/share/doc/libsane/*
SANE documentation: The READMEs, text files for backends etc.
PROBLEMS
If your device isn't found but you know that it is supported, make sure that it is detected by your
operating system. For SCSI and USB scanners, use the sane-find-scanner(1) utility. It prints one line
for each scanner it has detected and some comments (#). If sane-find-scanner(1) finds your scanner only
as root but not as normal user, the permissions for the device files are not adjusted correctly. If the
scanner isn't found at all, the operating system hasn't detected it and may need some help. Depending on
the type of your scanner, read sane-usb(5) or sane-scsi(5). If your scanner (or other device) is not
connected over the SCSI bus or USB, read the backend's manual page for details on how to set it up.
Is your scanner detected by the operating system but not by SANE? Try scanimage -L. If the scanner is
not found, check that the backend's name is mentioned in /etc/sane.d/dll.conf. Some backends are
commented out by default. Remove the comment sign for your backend in this case. Also some backends
aren't compiled at all if one of their prerequisites are missing. Examples include dc210, dc240,
canon_pp, hpsj5s, gphoto2, pint, qcam, v4l, net, sm3600, snapscan, pnm. If you need one of these backends
and it isn't available, read the build instructions in the README file and the individual manual pages of
the backends.
Another reason for not being detected by scanimage -L may be a missing or incorrect configuration in the
backend's configuration file. While SANE tries to automatically find most scanners, some can't be setup
correctly without the intervention of the administrator. Also on some operating systems auto-detection
may not work. Check the backend's manual page for details.
If your scanner is still not found, try setting the various environment variables that are available to
assist in debugging. The environment variables are documented in the relevant manual pages. For
example, to get the maximum amount of debug information when testing a Mustek SCSI scanner, set
environment variables SANE_DEBUG_DLL, SANE_DEBUG_MUSTEK, and SANE_DEBUG_SANEI_SCSI to 128 and then invoke
scanimage -L. The SANE_DEBUG_DLL messages tell if the sane-mustek(5) backend was found and loaded at
all. The SANE_DEBUG_MUSTEK messages explain what the backend is doing while the SANE_DEBUG_SCSI debugging
shows the low level handling. If you can't find out what's going on by checking the messages carefully,
contact the sane-devel mailing list for help (see REPORTING BUGS below).
Now that your scanner is found by scanimage -L, try to do a scan: scanimage >image.pnm. This command
starts a scan for the default scanner with default settings. All the available options are listed by
running scanimage --help. If scanning aborts with an error message, turn on debugging as mentioned
above. Maybe the configuration file needs some tuning, e.g. to setup the path to a firmware that is
needed by some scanners. See the backend's manual page for details. If you can't find out what's wrong,
contact sane-devel.
To check that the SANE libraries are installed correctly you can use the test backend, even if you don't
have a scanner or other SANE device:
scanimage -d test -T
You should get a list of PASSed tests. You can do the same with your backend by changing "test" to your
backend's name.
So now scanning with scanimage (1) works and you want to use one of the graphical frontends like
xsane(1), xscanimage(1), or quiteinsane(1) but those frontends don't detect your scanner? One reason may
be that you installed two versions of SANE. E.g. the version that was installed by your distribution in
/usr and one you installed from source in /usr/local/. Make sure that only one version is installed.
Another possible reason is, that your system's dynamic loader can't find the SANE libraries. For Linux,
make sure that /etc/ld.so.conf contains /usr/local/lib and does not contain /usr/local/lib/sane. See
also the documentation of the frontends.
HOW CAN YOU HELP SANE
We appreciate any help we can get. Please have a look at our web page about contributing to SANE:
http://www.sane-project.org/contrib.html
CONTACT
For reporting bugs or requesting new features, please use our bug-tracking system:
http://www.sane-project.org/bugs.html. You can also contact the author of your backend directly. Usually
the email address can be found in the /usr/share/doc/libsane/AUTHORS file or the backend's manpage. For
general discussion about SANE, please use the SANE mailing list sane-devel (see
http://www.sane-project.org/mailing-lists.html for details).
SEE ALSO
saned(8), sane-find-scanner(1), scanimage(1), sane-abaton(5), sane-agfafocus(5), sane-apple(5), sane-artec(5), sane-artec_eplus48u(5), sane-as6e(5), sane-avision(5), sane-bh(5), sane-canon(5), sane-canon630u(5), sane-canon_dr(5), sane-canon_pp(5), sane-cardscan(5), sane-coolscan(5), sane-coolscan2(5), sane-coolscan3(5), sane-dc210(5), sane-dc240(5), sane-dc25(5), sane-dll(5), sane-dmc(5), sane-epson(5), sane-epson2(5), sane-escl(5), sane-fujitsu(5), sane-genesys(5), sane-gphoto2(5), sane-gt68xx(5), sane-hp(5), sane-hpsj5s(5), sane-hp3500(5), sane-hp3900(5), sane-hp4200(5), sane-hp5400(5), sane-hpljm1005(5), sane-ibm(5), sane-kodak(5), sane-leo(5), sane-lexmark(5), sane-lexmark_x2600(5), sane-ma1509(5), sane-matsushita(5), sane-microtek2(5), sane-microtek(5), sane-mustek(5), sane-mustek_pp(5), sane-mustek_usb(5), sane-mustek_usb2(5), sane-nec(5), sane-net(5), sane-niash(5), sane-pie(5), sane-pint(5), sane-plustek(5), sane-plustek_pp(5), sane-pnm(5), sane-qcam(5), sane-ricoh(5), sane-ricoh2(5), sane-s9036(5), sane-sceptre(5), sane-scsi(5), sane-sharp(5), sane-sm3600(5), sane-sm3840(5), sane-snapscan(5), sane-sp15c(5), sane-st400(5), sane-stv680(5), sane-tamarack(5), sane-teco1(5), sane-teco2(5), sane-teco3(5), sane-test(5), sane-u12(5), sane-umax1220u(5), sane-umax(5), sane-umax_pp(5), sane-usb(5), sane-v4l(5), sane-xerox_mfp(5)
AUTHOR
David Mosberger-Tang and many many more (see /usr/share/doc/libsane/AUTHORS for details). This man page
was written by Henning Meier-Geinitz. Quite a lot of text was taken from the SANE standard, several man
pages, and README files.
03 Jan 2020 sane(7)