Provided by: catdoc_0.94.4-1.1+deb8u1build0.14.04.1_amd64 bug

NAME

       catdoc - reads MS-Word file and puts its content as plain text on standard output

SYNOPSIS

       catdoc [-vlu8btawxV] [-m number] [ -s charset] [ -d charset] [ -f output-format] file

DESCRIPTION

       catdoc behaves much like cat(1) but it reads MS-Word file and produces human-readable text
       on standard output.  Optionally it can use latex(1) escape sequences for characters  which
       have  special  meaning  for LaTeX.  It also makes some effort to recognize MS-Word tables,
       although it never tries to write correct headers for LaTeX tabular environment. Additional
       output formats, such is HTML can be easily defined.

       catdoc  doesn't  attempt  to extract formatting information other than tables from MS-Word
       document, so different output modes means  mainly  that  different  characters  should  be
       escaped  and different ways used to represent characters, missing from output charset. See
       CHARACTER SUBSTITUTION below

       catdoc uses internal unicode(7) representation of text, so it is  able  to  convert  texts
       when  charset  in  source  document doesn't match charset on target system.  See CHARACTER
       SETS below.

       If no file names supplied, catdoc processes its standard input unless it is  terminal.  It
       is  unlikely  that  somebody  could type Word document from keyboard, so if catdoc invoked
       without arguments and stdin is not redirected, it prints brief usage  message  and  exits.
       Processing of standard input (even among other files) can be forced using dash '-' as file
       name.

       By default, catdoc wraps lines which are more than 72 chars long and separates  paragraphs
       by  blank  lines.  This behavior can be turned of by -w switch. In wide mode catdoc prints
       each paragraph as one long line, suitable for import into word  processors  which  perform
       word wrapping.

OPTIONS

       -a      -  shortcut  for -f ascii. Produces ASCII text as output.  Separates table columns
               with TAB

       -b      - process broken MS-Word file. Normally, catdoc checks if first 8 bytes of file is
               Microsoft  OLE signature. If so, it processes file, otherwise it just copies it to
               stdin. It is intended to use catdoc as filter for  viewing  all  files  with  .doc
               extension.

       -dcharset
               -  specifies  destination  charset  name.  Charset  file  has  format described in
               CHARACTER SETS below and should have .txt extension  and reside in catdoc  library
               directory ( ${exec_prefix}/lib/catdoc). By default, current locale charset is used
               if langinfo support compiled in.

       -fformat
               - specifies output format as described in CHARACTER  SUBSTITUTION  below.   catdoc
               comes with two output formats - ascii and tex. You can add your own if you wish.

       -l      Causes  catdoc  to  list  names  of  available  charsets  to  the  stdout and exit
               successfully.

       -mnumber
               Specifies right margin for text  (default 72).  -m 0 is equivalent to -w

       -scharset
               Specifies source charset. (one used in Word document), if  Word  document  doesn't
               contain  UTF-16   text. When reading rtf documents, it is typically not necessary,
               because rtf documents contain ansicpg specification. But it can be  set  wrong  by
               Word  (I've  seen  RTF  documents on Russian, where cp1252 was specified). In this
               case this option would take precedence over charset, specified  in  the  document.
               But  source_charset  statement  in  the configuration file have less priority than
               charset in the document.

       -t      - shortcut for -f tex
                converts all printable chars,  which  have  special  meaning  for  LaTeX(1)  into
               appropriate control sequences. Separates table columns by &.

       -u      - declares that Word  document  contain  UNICODE   (UTF-16) representation of text
               (as some Word-97 documents). If  catdoc  fails  to  correct   Word  document  with
               default charset,   try    this  option.

       -8      - declares is Word document is 8 bit. Just in case that catdoc
                recognizes file format incorrectly.

       -w      disables  word  wrapping.  By default catdoc output is split into lines not longer
               than 72 (or  number, specified by -m   option)    characters  and  paragraphs  are
               separated by blank line. With this option each paragraph is one long line.

       -x      causes  catdoc  to output unknown UNICODE character as \xNNNN, instead of question
               marks.

       -v      causes catdoc to print some useless information about word document  structure  to
               stdout before actual start of text.

       -V      outputs catdoc version

CHARACTER SETS

       When  processing  MS-Word file catdoc uses information about two character sets, typically
       different
        -  input and output. They are stored in  plain  text  files  in  catdoc  data  directory.
       Character  set  files  should contain two whitespace-separated hexadecimal numbers - 8-bit
       code in character set and 16-bit Unicode code.  Anything from hash mark to end of line  is
       ignored, as well as blank lines.

       catdoc  distribution  includes  some  of  these  character  sets. Additional character set
       definitions, directly usable by catdoc can be obtained from ftp.unicode.org. Charset files
       have .txt suffix, which shouldn't be specified in command-line or configuration files.

       Note that catdoc is distributed with Cyrillic charsets as default. If you are not Russian,
       you probably don't want it, an should reconfigure catdoc at compile  time  or  in  runtime
       configuration file.

       When  dealing  with  documents  with  charsets other than default, remember that Microsoft
       never uses ISO charsets. While letters in, say cp1252 are  at  the  same  position  as  in
       ISO-8859-1,  some  punctuation  signs  would  be  lost, if you specify ISO-8859-1 as input
       charset. If you use cp1252, catdoc would deal with those signs as described  in  CHARACTER
       SUBSTITUTION below.

CHARACTER SUBSTITUTION

       catdoc converts  MS-Word file into following internal Unicode representation:

       1. Paragraphs are separated by ASCII Line Feed symbol (0x000A)

       2. Table cells within row are separated by ASCII Field Separator symbol
           (0x001C)

       3. Table rows are separated by ASCII Record Separator (0x001E)

       4. All printable characters, including whitespace are represented with their
           respective UNICODE codes.

       This  UNICODE representation is subsequently converted into 8-bit text in target character
       set using following four-step algorithm:

       1. List of special characters is searched for given Unicode character.
           If found, then appropriate multi-character sequence is output instead of character.

       2. If there is an equivalent in target character set, it is output.

       3. Otherwise, replacement list is searched and, if there is multi-character
           substitution for this UNICODE char, it is output.

       4. If all above fails, "Unknown char" symbol (question mark) is output.

       Lists of special characters  and  list  of  substitution  are  character  set-independent,
       because  special chars should be escaped regardless of their existence in target character
       set  (usually, they are parts of US-ASCII, and therefore exist in any character  set)  and
       replacement  list  is  searched  only  for those characters, which are not found in target
       character set.

       These lists are stored in catdoc data directory in files with prefix of format name. These
       files have following format:

       Each  line  can be either comment (starting with hash mark) or contain hexadecimal UNICODE
       value, separated by whitespace from string, which would be substituted instead of  it.  If
       string  contain  no  whitespace  it  can be used as is, otherwise it should be enclosed in
       single or double quotes. Usual backslash sequences like '\n','\t' can  be  used  in  these
       string.

RUNTIME CONFIGURATION

       Upon  startup catdoc reads its system-wide configuration file /etc/catdocrc and then user-
       specific configuration file ${HOME}/.catdocrc.

       These files can contain following directives:

       source_charset = charset-name
               Sets default source charset, which would  be  used  if  no  -s  option  specified.
               Consult configuration of nearby windows workstation to find one you need.

       target_charset = charset-name
                Sets default output charset. You probably know, which one you use.

       charset_path = directory-list
               colon-separated  list  of directories, which are searched for charset files.  This
               allows you to install additional  charsets  in  your  home  directory.   If  first
               directory  component  of  path is ~ it is replaced by contents of HOME environment
               variable.  On MS-DOS platform, if directory name starts with %s,  it  is  replaced
               with  directory  of  executable  file. Empty element in list (i.e. two consequitve
               colons) is considered current directory.

       map_path = directory-list
               colon-separated list of directories, which are searched for special character  map
               and replacement map.  Same substitution rules as in charset_path are applied.

       format = format name
               Output  format  which  would  be used by default.  catdoc comes with two formats -
               ascii and tex but nothing prevents you from writing your own format (set  two  map
               files - special character map and replacement map).

       unknown_char = character specification
               sets  character  to  output  instead  of  unknown  Unicode character (default '?')
               Character specification can have one of two form - character  enclosed  in  single
               quotes or hexadecimal code.

       use_locale =(yes|no)
               Enables or disables automatic selection of output charset (default yes),
                based  on  system  locale  settings  (if  enabled  at compile time). If automatic
               detection is enabled, than output charset settings in the configuration files (but
               not  in  the  command line) are ignored, and current system locale charset is used
               instead. There are no automatic choice of input charset, based of locale language,
               because most modern Word files (since Word 97) are Unicode anyway

BUGS

       Doesn't  handle fast-saves properly. Prints footnotes as separate paragraphs at the end of
       file, instead of producing correct LaTeX commands. Cannot distinguish between empty  table
       cell and end of table row.

SEE ALSO

       xls2csv(1), cat(1), strings(1), utf(4), unicode(7)

AUTHOR

       V.B.Wagner <vitus@45.free.net>