Provided by: devscripts_2.16.2ubuntu3_amd64 bug

NAME

       cowpoke - Build a Debian source package in a remote cowbuilder instance

SYNOPSIS

       cowpoke [options] packagename.dsc

DESCRIPTION

       Uploads  a  Debian  source  package  to  a  cowbuilder host and builds it, optionally also
       signing and uploading the result to an incoming queue.

OPTIONS

       The following options are available:

       --arch=architecture
              Specify the Debian architecture(s)  to  build  for.   A  space  separated  list  of
              architectures  may  be  used to build for all of them in a single pass.  Valid arch
              names are those returned by dpkg-architecture(1) for DEB_BUILD_ARCH.

       --dist=distribution
              Specify the Debian distribution(s)  to  build  for.   A  space  separated  list  of
              distributions  may  be  used  to  build  for  all of them in a single pass.  Either
              codenames (such as sid, or squeeze) or distribution names  (such  as  unstable,  or
              experimental)  may  be used, but you should usually stick to using one or the other
              consistently as this name may be used in file paths and to locate old packages  for
              comparison reporting.

              It is now also possible to use locally defined names with this option, when used in
              conjunction with the BASE_DIST option in a configuration file.   This  permits  the
              maintenance and use of specially configured build chroots, which can source package
              dependencies from the backports archives or  a  local  repository,  or  have  other
              unusual  configuration options set, without polluting the chroots you use for clean
              package builds intended for upload to the main repositories.  See  the  description
              of BASE_DIST below.

       --buildd=host
              Specify the remote host to build on.

       --buildd-user=name
              Specify the remote user to build as.

       --create
              Create  the remote cowbuilder root if it does not already exist.  If this option is
              not passed it is an error for the  specified  --dist  or  --arch  to  not  have  an
              existing cowbuilder root in the expected location.

              The  --buildd-user must have permission to create the RESULT_DIR on the build host,
              or an admin with the necessary permission must first create it and give  that  user
              (or some group they are in) write access to it, for this option to succeed.

       --return=[path]
              Copy  results  of the build to path.  If path is not specified, then return them to
              the current directory. The given path must exist, it will not be created.

       --no-return
              Do not copy results of the build to RETURN_DIR (overriding a path set for it in the
              configuration files).

       --dpkg-opts='opt1 opt2 ...'
              Specify  additional options to be passed to dpkg-buildpackage(1).  Multiple options
              are  delimited  with  spaces.   This  will  override  any  options   specified   in
              DEBBUILDOPTS in the build host's pbuilderrc.

       --create-opts='cowbuilder option'
              Specify  additional  arguments to be passed verbatim to cowbuilder when a chroot is
              first created (using the --create option above). If multiple arguments need  to  be
              passed, this option should be specified separately for each of them.

              E.g., --create-opts "--othermirror" --create-opts "deb http:// ..."

              This  option  will  override  any CREATE_OPTS specified for a chroot in the cowpoke
              configuration files.

       --update-opts='cowbuilder option'
              Specify additional arguments to be passed verbatim to cowbuilder if the base of the
              chroot  is updated.  If multiple arguments need to be passed, this option should be
              specified separately for each of them.

              This option will override any UPDATE_OPTS specified for a  chroot  in  the  cowpoke
              configuration files.

       --build-opts='cowbuilder option'
              Specify  additional  arguments  to  be passed verbatim to cowbuilder when a package
              build is performed.  If multiple arguments need to be passed, this option should be
              specified separately for each of them.

              This  option  will  override  any  BUILD_OPTS specified for a chroot in the cowpoke
              configuration files.

       --sign=keyid
              Specify the key to sign packages with.  This will override any SIGN_KEYID specified
              for a chroot in the cowpoke configuration files.

       --upload=queue
              Specify  the  dput  queue  to  upload  signed  packages to.  This will override any
              UPLOAD_QUEUE specified for a chroot in the cowpoke configuration files.

       --help Display a brief summary of the available options and current configuration.

       --version
              Display the current version information.

CONFIGURATION OPTIONS

       When cowpoke is run the following configuration options are read  from  global,  per-user,
       and  per-project  configuration files if present.  File paths may be absolute or relative,
       the latter being relative to the  BUILDD_USER's  home  directory.   Since  the  paths  are
       typically quoted when used, tilde expansion will not be performed on them.

   Global defaults
       These apply to every arch and dist in a single cowpoke invocation.

       BUILDD_HOST
              The  network  address  or fqdn of the build machine where cowbuilder is configured.
              This may be overridden by the --buildd command line option.

       BUILDD_USER
              The unprivileged user name for operations on the build machine.  This  defaults  to
              the local name of the user executing cowpoke (or to a username that is specified in
              your SSH configuration for BUILDD_HOST), and may be overridden by the --buildd-user
              command line option.

       BUILDD_ARCH
              The Debian architecture(s) to build for.  This must match the DEB_BUILD_ARCH of the
              build chroot being used.  It defaults  to  the  local  machine  architecture  where
              cowpoke  is  executed,  and may be overridden by the --arch command line option.  A
              (quoted) space separated list of architectures may be used here to build for all of
              them in a single pass.

       BUILDD_DIST
              The  Debian  distribution(s)  to  build  for.   A  (quoted) space separated list of
              distributions may be used to build for all of them in a single pass.  This  may  be
              overridden by the --dist command line option.

       INCOMING_DIR
              The  directory path on the build machine where the source package will initially be
              placed.  This must be writable by the BUILDD_USER.

       PBUILDER_BASE
              The filesystem root for all pbuilder CoW and result files.  Arch and dist  specific
              subdirectories  will  normally  be created under this.  The apt cache and temporary
              build directory will also be located under this path.

       SIGN_KEYID
              If this option is set, it is expected  to  contain  the  gpg  key  ID  to  pass  to
              debsign(1)  if  the  packages  are  to be remotely signed.  You will be prompted to
              confirm whether you wish to sign the packages after all builds  are  complete.   If
              this  option is unset or an empty string, no attempt to sign packages will be made.
              It  may  be  overridden  on  an  arch   and   dist   specific   basis   using   the
              arch_dist_SIGN_KEYID  option  described  below,  or  per-invocation with the --sign
              command line option.

       UPLOAD_QUEUE
              If this option is set, it is expected to contain a 'host' specification for dput(1)
              which  will  be used to upload them after they are signed.  You will be prompted to
              confirm whether you wish to upload the packages after they  are  signed.   If  this
              option is unset or an empty string, no attempt to upload packages will be made.  If
              SIGN_KEYID is not set, this option will be ignored entirely.  It may be  overridden
              on  an  arch  and  dist  specific  basis  using  the  arch_dist_UPLOAD_QUEUE option
              described below, or per-invocation with the --upload command line option.

       BUILDD_ROOTCMD
              The command to use to gain root privileges on the remote build machine.   If  unset
              the default is sudo(8).  This is only required to invoke cowbuilder and allow it to
              enter its chroot, so you may restrict this user to only  being  able  to  run  that
              command  with  escalated  privileges.   Something  like this in sudoers will enable
              invoking cowbuilder without an additional password entry required:

                      youruser ALL = NOPASSWD: /usr/sbin/cowbuilder

              Alternatively you could use SSH with a forwarded key, or whatever  other  mechanism
              suits  your local access policy.  Using su -c isn't really suitable here due to its
              quoting requirements being somewhat different to the rest.

       DEBOOTSTRAP
              The utility to use when creating a new build root.  Alternatives are debootstrap or
              cdebootstrap.

       RETURN_DIR
              If set, package files resulting from the build will be copied to the path (local or
              remote) that this is set to, after the build completes.  The path  must  exist,  it
              will  not  be  created.  This option is unset by default and can be overridden with
              --return or --no-return.

   Arch and dist specific options
       These are variables of the form: $arch_$dist_VAR which apply only for a particular  target
       arch/dist build.

       arch_dist_RESULT_DIR
              The  directory  path  on the build machine where the resulting packages (source and
              binary) will be found, and where older versions of  the  package  that  were  built
              previously may be found.  If any such older packages exist, debdiff will be used to
              compare the new package with the previous version after the build is complete,  and
              the  result will be included in the build log.  Files in it must be readable by the
              BUILDD_USER for sanity checking with lintian(1) and debdiff(1), and for upload with
              dput(1).   If  this option is not specified for some arch and dist combination then
              it will default to $PBUILDER_BASE/$arch/$dist/result

       arch_dist_BASE_PATH
              The directory where the CoW master files  are  to  be  found  (or  created  if  the
              --create command line option was passed).  If this option is not specified for some
              arch or dist then it will default to $PBUILDER_BASE/$arch/$dist/base.cow

       arch_dist_BASE_DIST
              The code name to pass as the --distribution option for cowbuilder instead of  dist.
              This  is  necessary  when  dist  is  a  locally  significant  name assigned to some
              specially configured build chroot, such as 'wheezy_backports', and not  the  formal
              suite  name  of  a  distro  release  known  to  debootstrap.  This option cannot be
              overridden on the command line, since it would rarely, if ever, make any  sense  to
              change  it  for  individual invocations of cowpoke. If this option is not specified
              for an arch and dist combination then it will default to dist.

       arch_dist_CREATE_OPTS
              A bash array containing additional options to pass verbatim to cowbuilder when this
              chroot  is  created for the first time (using the --create option).  This is useful
              when  options  like  --othermirror  are  wanted  to   create   specialised   chroot
              configurations  such  as 'wheezy_backports'.  By default this is unset.  All values
              set in it will be overridden if the --create-opts option is passed on  the  command
              line.

              Each  element  in  this  array corresponds to a single argument (in the ARGV sense)
              that will be passed to cowbuilder.  This ensures that arguments which  may  contain
              whitespace  or  have  strange quoting requirements or other special characters will
              not be mangled before they get to cowbuilder.

              Bash arrays are initialised using the following form:

                  OPTS=( "arg1" "arg 2" "--option" "value" "--opt=val" "etc. etc." )

       arch_dist_UPDATE_OPTS
              A bash array containing additional options to pass verbatim to cowbuilder each time
              the base of this chroot is updated.  It behaves similarly to the CREATE_OPTS option
              above, except for acting when the chroot is updated.

       arch_dist_BUILD_OPTS
              A bash array containing additional options to pass verbatim to cowbuilder each time
              a  package  build is performed in this chroot.  This is useful when you want to use
              some option like --twice which cowpoke does not directly need to  care  about.   It
              otherwise  behaves  similarly  to  UPDATE_OPTS above except that it acts during the
              build phase of cowbuilder.

       arch_dist_SIGN_KEYID
              An optional arch and dist specific override for the global SIGN_KEYID option.

       arch_dist_UPLOAD_QUEUE
              An optional arch and dist specific override for the global UPLOAD_QUEUE option.

CONFIGURATION FILES

       /etc/cowpoke.conf
              Global configuration options.  Will override hardcoded defaults.

       ~/.cowpoke
              Per-user configuration options.  Will override any global configuration.

       .cowpoke
              Per-project  configuration  options.   Will  override  any   per-user   or   global
              configuration if cowpoke is called from the directory where they exist.

              If  the  environment  variable  COWPOKE_CONF  is  set,  it  specifies an additional
              configuration file which will override  all  of  those  above.   Options  specified
              explicitly on the command line override all configuration files.

COWBUILDER CONFIGURATION

       There  is nothing particularly special required to configure a cowbuilder instance for use
       with cowpoke.  Simply create them in the flavour you require  with  `cowbuilder  --create`
       according to the cowbuilder documentation, then configure cowpoke with the user, arch, and
       path information required to access it, on the machines you wish to  invoke  it  from  (or
       alternatively  configure cowpoke with the path, arch and distribution information and pass
       the --create option to it on the first invocation).  The  build  host  running  cowbuilder
       does not require cowpoke installed locally.

       The build machine should have the lintian and devscripts packages installed for post-build
       sanity checking.  Upon completion, the build log and the results of automated checks  will
       be  recorded in the INCOMING_DIR.  If you wish to upload signed packages the build machine
       will also need dput(1) installed and configured to  use  the  'host'  alias  specified  by
       UPLOAD_QUEUE.   If rsync(1) is available on both the local and build machine, then it will
       be used to transfer the source package (this may save on some transfers of the  orig.tar.*
       when building subsequent Debian revisions).

       The  user  executing cowpoke must have SSH access to the build machine as the BUILDD_USER.
       That user must be able to invoke cowbuilder as root by using the BUILDD_ROOTCMD.   Signing
       keys  are  not required to be installed on the build machine (and will be ignored there if
       they are).  If the package is signed, keys will be expected on the machine  that  executes
       cowpoke.

       When  cowpoke is invoked, it will first attempt to update the cowbuilder image if that has
       not already been done on the same day.  This is checked by the presence or  absence  of  a
       cowbuilder-$arch-$dist-update-log-$date  file  in the INCOMING_DIR.  You may move, remove,
       or touch this file if you wish the image to be updated more or less often than that.   Its
       contents log the output of cowbuilder during the update (or creation) of the build root.

NOTES

       Since  cowbuilder  creates  a  chroot, and to do that you need root, cowpoke also requires
       some degree of root access.  So all the horrible things that can go wrong  with  that  may
       well one day rain down upon you.  cowbuilder has been known to accidentally wipe out bind-
       mounted filesystems outside the chroot, and worse than that  can  easily  happen.   So  be
       careful, keep good backups of things you don't want to lose on your build machine, and use
       cowpoke to keep all that on a machine that isn't your bleeding edge dev box with your last
       few hours of uncommitted work.

SEE ALSO

       cowbuilder(1), pbuilder(1), ssh-agent(1), sudoers(5)

AUTHOR

       cowpoke was written by Ron <ron@debian.org>.

                                          April 28, 2008                               COWPOKE(1)