Ubuntu Manpage: sane - Scanner Access Now Easy: API for accessing scanners

Provided by: libsane-common_1.0.25+git20150528-1ubuntu2.16.04.3_all

NAME

       sane - Scanner Access Now Easy: API for accessing scanners

DESCRIPTION

       SANE  is an application programming interface (API) that provides standardized access to any raster image
       scanner hardware. The standardized interface makes it possible to write just one driver for each  scanner
       device instead of one driver for each scanner and application.

       While  SANE is primarily targeted at a UNIX environment, the standard has been carefully designed to make
       it possible to implement the API on virtually any hardware or operating system.

       This manual page provides a summary of the information available about SANE.

       If you have trouble getting your scanner detected, read the PROBLEMS section.

TERMINOLOGY

       An application that uses the SANE interface is called a SANE frontend.  A driver that implements the SANE
       interface is called a SANE backend.  A meta backend provides some means  to  manage  one  or  more  other
       backends.

SOFTWARE PACKAGES

       The  package  `sane-backends'  contains  a  lot of backends, documentation (including the SANE standard),
       networking support, and the command line frontend `scanimage'.  The frontends `xscanimage',  `xcam',  and
       `scanadf'  are  included  in the package `sane-frontends'.  Both packages can be downloaded from the SANE
       homepage (http://www.sane-project.org/).  Information about other frontends  and  backends  can  also  be
       found on the SANE homepage.

GENERAL INFORMATION

The following sections provide short descriptions and links to more information about several aspects of
SANE. A name with a number in parenthesis (e.g. `sane-dll(5)') points to a manual page. In this case
`man 5 sane-dll' will display the page. Entries like `/usr/share/doc/libsane/sane.tex' are references to
text files that were copied to the SANE documentation directory (/usr/share/doc/libsane/) during
installation. Everything else is a URL to a resource on the web.

SANE homepage
Information on all aspects of SANE including a tutorial and a link to the SANE FAQ can be found on the
SANE homepage: http://www.sane-project.org/.

SANE device lists
The SANE device lists contain information about the status of SANE support for a specific device. If
your scanner is not listed there (either supported or unsupported), please contact us. See section HOW
CAN YOU HELP SANE for details. There are lists for specific releases of SANE, for the current
development version and a search engine: http://www.sane-project.org/sane-supported-devices.html. The
lists are also installed on your system at /usr/share/doc/libsane/.

SANE mailing list
There is a mailing list for the purpose of discussing the SANE standard and its implementations:
sane-devel. Despite its name, the list is not only intended for developers, but also for users. There
are also some more lists for special topics, however, for users, sane-devel is the right list. How to
subscribe and unsubscribe: http://www.sane-project.org/mailing-lists.html.

SANE IRC channel
The IRC (Internet Relay Chat) channel #sane can be found on the Freenode network (irc.freenode.net).
It's for discussing SANE problems, talking about development and general SANE related chatting. Before
asking for help, please read the other documentation mentioned in this manual page. The channel's topic
is also used for announcements of problems with SANE infrastructure (mailing lists, web server, etc.).

Compiling and installing SANE
Look at /usr/share/doc/libsane/README and the os-dependent README files for information about compiling
and installing SANE.

SCSI configuration
For information about various systems and SCSI controllers see sane-scsi(5).

USB configuration
For information about USB configuration see sane-usb(5).

FRONTENDS AND MISCELLANEOUS PROGRAMS

       scanimage
         Command-line frontend. See scanimage(1).

       saned
         SANE  network  daemon  that  allows remote clients to access image acquisition devices available on the
         local host. See saned(8).

       sane-find-scanner
         Command-line tool  to  find  SCSI  and  USB  scanners  and  determine  their  Unix  device  files.  See
         sane-find-scanner(1).

       Also,  have  a  look  at  the  sane-frontends  package  (including xscanimage, xcam, and scanadf) and the
       frontend information page at http://www.sane-project.org/sane-frontends.html.

BACKENDS FOR SCANNERS

abaton
The SANE backend for Abaton flatbed scanners supports the Scan 300/GS (8bit, 256 levels of gray) and
the Scan 300/S (black and white, untested). See sane-abaton(5) for details.

agfafocus
This backend supports AGFA Focus scanners and the Siemens S9036 (untested). See sane-agfafocus(5) for
details.

apple
The SANE backend for Apple flatbed scanners supports the following scanners: AppleScanner, OneScanner
and ColorOneScanner. See sane-apple(5) for details.

artec
The SANE Artec backend supports several Artec/Ultima SCSI flatbed scanners as well as the BlackWidow
BW4800SP and the Plustek 19200S. See sane-artec(5) for details.

artec_eplus48u
The SANE artec_eplus48u backend supports the scanner Artec E+ 48U and re-badged models like Tevion MD
9693, Medion MD 9693, Medion MD 9705 and Trust Easy Webscan 19200. See sane-artec_eplus48u(5) for
details.

as6e
This is a SANE backend for using the Artec AS6E parallel port interface scanner. See sane-as6e(5) for
details.

avision
This backend supports several Avision based scanners. This includes the original Avision scanners (like
AV 630, AV 620, ...) as well as the HP ScanJet 53xx and 74xx series, Fujitsu ScanPartner, some
Mitsubishi and Minolta film-scanners. See sane-avision(5) for details.

bh
The bh backend provides access to Bell+Howell Copiscan II series document scanners. See sane-bh(5) for
details.

canon
The canon backend supports the CanoScan 300, CanoScan 600, and CanoScan 2700F SCSI flatbed scanners.
See sane-canon(5) for details.

canon630u
The canon630u backend supports the CanoScan 630u and 636u USB scanners. See sane-canon630u(5) for
details.

canon_dr
The canon_dr backend supports the Canon DR-Series ADF SCSI and USB scanners. See sane-canon_dr(5) for
details.

canon_pp
The canon_pp backend supports the CanoScan FB330P, FB630P, N340P and N640P parallel port scanners. See
sane-canon_pp(5) for details.

cardscan
This backend provides support for Corex Cardscan USB scanners. See sane-cardscan(5) for details.

coolscan
This is a SANE backend for Nikon Coolscan film-scanners. See sane-coolscan(5) for details.

coolscan2
This is a SANE backend for Nikon Coolscan film-scanners. See sane-coolscan2(5) or
http://coolscan2.sourceforge.net for details.

epjitsu
The epjitsu backend provides support for Epson-based Fujitsu USB scanners. See sane-epjitsu(5) for
details.

epson
The SANE epson backend provides support for Epson SCSI, parallel port and USB flatbed scanners. See
sane-epson(5) for details.

fujitsu
The fujitsu backend provides support for most Fujitsu SCSI and USB, flatbed and adf scanners. See
sane-fujitsu(5) for details.

genesys
The genesys backend provides support for several scanners based on the Genesys Logic GL646, GL841,
GL843, GL847 and GL124 chips like the Medion 6471 and Hewlett-Packard 2300c.
See sane-genesys(5) for details.

gt68xx
The gt68xx backend provides support for scanners based on the Grandtech GT-6801 and GT-6816 chips like
the Artec Ultima 2000 and several Mustek BearPaw CU and TA models. Some Genius, Lexmark, Medion,
Packard Bell, Plustek, and Trust scanners are also supported. See sane-gt68xx(5) for details.

hp
The SANE hp backend provides access to Hewlett-Packard ScanJet scanners which support SCL (Scanner
Control Language by HP). See sane-hp(5) for details.

hpsj5s
The SANE backend for the Hewlett-Packard ScanJet 5S scanner. See sane-hpsj5s(5) for details.

hp3500
The SANE backend for the Hewlett-Packard ScanJet 3500 series. See sane-hp3500(5) for details.

hp3900
The SANE backend for the Hewlett-Packard ScanJet 3900 series. See sane-hp3900(5) for details.

hp4200
The SANE backend for the Hewlett-Packard ScanJet 4200 series. See sane-hp4200(5) for details.

hp5400
The SANE backend for the Hewlett-Packard ScanJet 54XXC series. See sane-hp5400(5) for details.

hpljm1005
The SANE backend for the Hewlett-Packard LaserJet M1005 scanner. See sane-hpljm1005(5) for details.

hs2p
The SANE backend for the Ricoh IS450 family of SCSI scanners. See sane-hs2p(5) for details.

ibm
The SANE backend for some IBM and Ricoh SCSI scanners. See sane-ibm(5) for details.

kodak
The SANE backend for some large Kodak scanners. See sane-kodak(5) for details.

kodakaio
The SANE backend for Kodak AiO printer/scanners. See sane-kodakaio(5) for details.

kvs1025
The SANE backend for Panasonic KV-S102xC scanners. See sane-kvs1025(5) for details.

leo
This backend supports the Leo S3 and the Across FS-1130, which is a re-badged LEO FS-1130 scanner. See
sane-leo(5) for details.

lexmark
This backend supports the Lexmark X1100 series of USB scanners. See sane-lexmark(5) for details.

ma1509
The ma1509 backend supports the Mustek BearPaw 1200F USB flatbed scanner. See sane-ma1509(5) for
details.

magicolor
The magicolor backend supports the KONICA MINOLTA magicolor 1690MF multi-function printer/scanner/fax.
See sane-magicolor(5) for details.

matsushita
This backend supports some Panasonic KVSS high speed scanners. See sane-matsushita(5) for details.

microtek
The microtek backend provides access to the "second generation" Microtek scanners with SCSI-1 command
set. See sane-microtek(5) for details.

microtek2
The microtek2 backend provides access to some Microtek scanners with a SCSI-2 command set. See
sane-microtek2(5) for details.

mustek
The SANE mustek backend supports most Mustek SCSI flatbed scanners including the Paragon and
ScanExpress series and the 600 II N and 600 II EP (non-SCSI). Some Trust scanners are also supported.
See sane-mustek(5) for details.

mustek_pp
The mustek_pp backend provides access to Mustek parallel port flatbed scanners. See sane-mustek_pp(5)
for details.

mustek_usb
The mustek_usb backend provides access to some Mustek ScanExpress USB flatbed scanners. See
sane-mustek_usb(5) for details.

mustek_usb2
The mustek_usb2 backend provides access to scanners using the SQ113 chipset like the Mustek BearPaw
2448 TA Pro USB flatbed scanner. See sane-mustek_usb2(5) for details.

nec
The SANE nec backend supports the NEC PC-IN500/4C SCSI scanner. See sane-nec(5) for details.

niash
The niash backend supports the Agfa Snapscan Touch and the HP ScanJet 3300c, 3400c, and 4300c USB
flatbed scanners. See sane-niash(5) for details.

p5
The SANE backend for Primax PagePartner. See sane-p5(5) for details.

pie
The pie backend provides access to Pacific Image Electronics (PIE) and Devcom SCSI flatbed scanners.
See sane-pie(5) for details.

pixma
The pixma backend supports Canon PIXMA MP series (multi-function devices). See sane-pixma(5) or
http://home.arcor.de/wittawat/pixma/ for details.

plustek
The SANE plustek backend supports USB flatbed scanners that use the National Semiconductor LM983[1/2/3]
chipset aka Merlin. Scanners using this LM983x chips include some models from Plustek, KYE/Genius,
Hewlett-Packard, Mustek, Umax, Epson, and Canon. See sane-plustek(5) for details.

plustek_pp
The SANE plustek_pp backend supports Plustek parallel port flatbed scanners. Scanners using the
Plustek ASIC P96001, P96003, P98001 and P98003 include some models from Plustek, KYE/Genius, Primax.
See sane-plustek_pp(5) for details.

ricoh
The ricoh backend provides access to the following Ricoh flatbed scanners: IS50 and IS60. See
sane-ricoh(5) for details.

s9036
The s9036 backend provides access to Siemens 9036 flatbed scanners. See sane-s9036(5) for details.

sceptre
The sceptre backend provides access to the Sceptre S1200 flatbed scanner. See sane-sceptre(5) for
details.

sharp
The SANE sharp backend supports Sharp SCSI scanners. See sane-sharp(5) for details.

sm3600
The SANE sm3600 backend supports the Microtek ScanMaker 3600 USB scanner. See sane-sm3600(5) for
details.

sm3840
The SANE sm3840 backend supports the Microtek ScanMaker 3840 USB scanner. See sane-sm3840(5) for
details.

snapscan
The snapscan backend supports AGFA SnapScan flatbed scanners. See sane-snapscan(5) for details.

sp15c
This backend supports the Fujitsu FCPA ScanPartner 15C flatbed scanner. See sane-sp15c(5) for details.

st400
The sane-st400 backend provides access to Siemens ST400 and ST800. See sane-st400(5) for details.

tamarack
The SANE tamarack backend supports Tamarack Artiscan flatbed scanners. See sane-tamarack(5) for
details.

teco1 teco2 teco3
The SANE teco1, teco2 and teco3 backends support some TECO scanners, usually sold under the Relisys,
Trust, Primax, Piotech, Dextra names. See sane-teco1(5), sane-teco2(5) and sane-teco3(5) for details.

u12
The sane-u12 backend provides USB flatbed scanners based on Plustek's ASIC 98003 (parallel-port ASIC)
and a GeneSys Logics' USB-parport bridge chip like the Plustek OpticPro U(T)12. See sane-u12(5) for
details.

umax
The sane-umax backend provides access to several UMAX-SCSI-scanners and some Linotype Hell SCSI-
scanners. See sane-umax(5) for details.

umax_pp
The sane-umax_pp backend provides access to Umax parallel port flatbed scanners and the HP 3200C. See
sane-umax_pp(5) for details.

umax1200u
The sane-umax1220u backend supports the UMAX Astra 1220U (USB) flatbed scanner (and also the UMAX Astra
2000U, sort of). See sane-umax1220u(5) for details.

Also, have a look at the backend information page at
http://www.sane-project.org/sane-supported-devices.html and the list of projects in
/usr/share/doc/libsane/PROJECTS.

BACKENDS FOR DIGITAL CAMERAS

       dc210
         Backend for Kodak DC210 Digital Camera. See sane-dc210(5).

       dc240
         Backend for Kodak DC240 Digital Camera. See sane-dc240(5).

       dc25
         Backend for Kodak DC20/DC25 Digital Cameras. See sane-dc25(5).

       dmc
         Backend for the Polaroid Digital Microscope Camera. See sane-dmc(5).

       gphoto2
         Backend for digital cameras supported by the gphoto2 library package.  (See  http://www.gphoto.org  for
         more  information and a list of supported cameras.)  Gphoto2 supports over 140 different camera models.
         However, please note that more development and testing is needed before all of these  cameras  will  be
         supported by SANE backend.  See sane-gphoto2(5).

       qcam
         Backend for Connectix QuickCam cameras. See sane-qcam(5).

       stv680
         The sane-st680 backend provides access to webcams with a stv680 chip. See sane-st680(5) for details.

       Also,       have       a       look       at       the       backend       information       page      at
       http://www.sane-project.org/sane-supported-devices.html    and    the     list     of     projects     in
       /usr/share/doc/libsane/PROJECTS.

MISCELLANEOUS BACKENDS

       dll
         The  sane-dll  library  implements  a SANE backend that provides access to an arbitrary number of other
         SANE backends by dynamic loading. See sane-dll(5).

       net
         The SANE network daemon saned provides access to scanners located on different computers in  connection
         with the net backend. See sane-net(5) and saned(8).

       pnm
         PNM  image  reader pseudo-backend. The purpose of this backend is primarily to aid in debugging of SANE
         frontends. See sane-pnm(5).

       pint
         Backend for scanners that use the PINT (Pint Is Not Twain) device driver.  The  PINT  driver  is  being
         actively  developed  on  the  OpenBSD  platform, and has been ported to a few other *nix-like operating
         systems. See sane-pint(5).

       test
         The SANE test backend is for testing frontends and the SANE installation.  It  provides  test  pictures
         and various test options. See sane-test(5).

       v4l
         The  sane-v4l  library  implements  a  SANE  backend  that provides generic access to video cameras and
         similar equipment using the V4L (Video for Linux) API. See sane-v4l(5).

       Also,      have       a       look       at       the       backend       information       page       at
       http://www.sane-project.org/sane-supported-devices.html     and     the     list     of    projects    in
       /usr/share/doc/libsane/PROJECTS.

CHANGING THE TOP-LEVEL BACKEND

       By default, all SANE backends (drivers) are loaded dynamically by the sane-dll meta backend. If you  have
       any  questions  about  the  dynamic loading, read sane-dll(5).  SANE frontend can also be linked to other
       backends directly by copying or linking a backend to libsane.so in /usr/lib/arch_triplet/sane.

DEVELOPER'S DOCUMENTATION

It's not hard to write a SANE backend. It can take some time, however. You should have basic knowledge of
C and enough patience to work through the documentation and find out how your scanner works. Appended is
a list of some documents that help to write backends and frontends.

The SANE standard defines the application programming interface (API) that is used to communicate between
frontends and backends. It can be found at /usr/share/doc/libsane/sane.ps (if latex is installed on your
system) and on the SANE website: http://www.sane-project.org/html/ (HTML), or
http://www.sane-project.org/sane.ps (Postscript).

There is some more information for programmers in /usr/share/doc/libsane/backend-writing.txt. Most of
the internal SANE routines (sanei) are documented using doxygen: http://www.sane-project.org/sanei/.
Before a new backend or frontend project is started, have a look at /usr/share/doc/libsane/PROJECTS for
projects that are planned or not yet included into the SANE distribution and at our bug-tracking system:
http://www.http://www.sane-project.org/bugs.html.

There are some links on how to find out about the protocol of a scanner:
http://www.meier-geinitz.de/sane/misc/develop.html.

If you start writing a backend or frontend or any other part of SANE, please contact the sane-devel
mailing list for coordination so the same work isn't done twice.

FILES

       /etc/sane.d/*.conf
              The backend configuration files.

       /usr/lib/arch_triplet/sane/libsane-*.a
              The static libraries implementing the backends.

       /usr/lib/arch_triplet/sane/libsane-*.so
              The shared libraries implementing the backends (present on systems that support dynamic loading).

       /usr/share/doc/libsane/*
              SANE documentation: The standard, READMEs, text files for backends etc.

PROBLEMS

If your device isn't found but you know that it is supported, make sure that it is detected by your
operating system. For SCSI and USB scanners, use the sane-find-scanner tool (see sane-find-scanner(1) for
details). It prints one line for each scanner it has detected and some comments (#). If sane-find-scanner
finds your scanner only as root but not as normal user, the permissions for the device files are not
adjusted correctly. If the scanner isn't found at all, the operating system hasn't detected it and may
need some help. Depending on the type of your scanner, read sane-usb(5) or sane-scsi(5). If your scanner
(or other device) is not connected over the SCSI bus or USB, read the backend's manual page for details
on how to set it up.

Now your scanner is detected by the operating system but not by SANE? Try scanimage -L. If the scanner
is not found, check that the backend's name is mentioned in /etc/sane.d/dll.conf. Some backends are
commented out by default. Remove the comment sign for your backend in this case. Also some backends
aren't compiled at all if one of their prerequisites are missing. Examples include dc210, dc240,
canon_pp, hpsj5s, gphoto2, pint, qcam, v4l, net, sm3600, snapscan, pnm. If you need one of these backends
and they aren't available, read the build instructions in the README file and the individual manual pages
of the backends.

Another reason for not being detected by scanimage -L may be a missing or wrong configuration in the
backend's configuration file. While SANE tries to automatically find most scanners, some can't be setup
correctly without the intervention of the administrator. Also on some operating systems auto-detection
may not work. Check the backend's manual page for details.

If your scanner is still not found, try setting the various environment variables that are available to
assist in debugging. The environment variables are documented in the relevant manual pages. For
example, to get the maximum amount of debug information when testing a Mustek SCSI scanner, set
environment variables SANE_DEBUG_DLL, SANE_DEBUG_MUSTEK, and SANE_DEBUG_SANEI_SCSI to 128 and then invoke
scanimage -L . The debug messages for the dll backend tell if the mustek backend was found and loaded at
all. The mustek messages explain what the mustek backend is doing while the SCSI debugging shows the low
level handling. If you can't find out what's going on by checking the messages carefully, contact the
sane-devel mailing list for help (see REPORTING BUGS below).

Now that your scanner is found by scanimage -L, try to do a scan: scanimage >image.pnm. This command
starts a scan for the default scanner with default settings. All the available options are listed by
running scanimage --help. If scanning aborts with an error message, turn on debugging as mentioned
above. Maybe the configuration file needs some tuning, e.g. to setup the path to a firmware that is
needed by some scanners. See the backend's manual page for details. If you can't find out what's wrong,
contact sane-devel.

To check that the SANE libraries are installed correctly you can use the test backend, even if you don't
have a scanner or other SANE device:

scanimage -d test -T

You should get a list of PASSed tests. You can do the same with your backend by changing "test" to your
backend's name.

So now scanning with scanimage works and you want to use one of the graphical frontends like xsane,
xscanimage, or quiteinsane but those frontends don't detect your scanner? One reason may be that you
installed two versions of SANE. E.g. the version that was installed by your distribution in /usr and one
you installed from source in /usr/local/. Make sure that only one version is installed. Another possible
reason is, that your system's dynamic loader can't find the SANE libraries. For Linux, make sure that
/etc/ld.so.conf contains /usr/local/lib and does not contain /usr/local/lib/sane. See also the
documentation of the frontends.

HOW CAN YOU HELP SANE

       We appreciate any help we can get. Please have a look  at  our  web  page  about  contributing  to  SANE:
       http://www.sane-project.org/contrib.html

CONTACT

       For    reporting   bugs   or   requesting   new   features,   please   use   our   bug-tracking   system:
       http://www.sane-project.org/bugs.html.  You can also contact the author of your backend directly. Usually
       the email address can be found in the /usr/share/doc/libsane/AUTHORS file or the backend's  manpage.  For
       general    discussion    about    SANE,    please   use   the   SANE   mailing   list   sane-devel   (see
       http://www.sane-project.org/mailing-lists.html for details).

AUTHOR

       David Mosberger-Tang and many many more (see /usr/share/doc/libsane/AUTHORS for details).  This man  page
       was  written  by Henning Meier-Geinitz. Quite a lot of text was taken from the SANE standard, several man
       pages, and README files.

                                                   14 Jul 2008                                           sane(7)