Provided by: explain_1.4.D001-12_amd64 
NAME
explain_lca2010 - No medium found: when it's time to stop trying to read strerror(3)'s
mind.
MOTIVATION
The idea for libexplain occurred to me back in the early 1980s. Whenever a system call
returns an error, the kernel knows exactly what went wrong... and compresses this into
less that 8 bits of errno. User space has access to the same data as the kernel, it
should be possible for user space to figure out exactly what happened to provoke the error
return, and use this to write good error messages.
Could it be that simple?
Error messages as finesse
Good error messages are often those “one percent” tasks that get dropped when schedule
pressure squeezes your project. However, a good error message can make a huge,
disproportionate improvement to the user experience, when the user wanders into scarey
unknown territory not usually encountered. This is no easy task.
As a larval programmer, the author didn't see the problem with (completely accurate) error
messages like this one:
floating exception (core dumped)
until the alternative non‐programmer interpretation was pointed out. But that isn't the
only thing wrong with Unix error messages. How often do you see error messages like:
$ ./stupid
can't open file
$
There are two options for a developer at this point:
1.
you can run a debugger, such as gdb(1), or
2.
you can use strace(1) or truss(1) to look inside.
• Remember that your users may not even have access to these tools, let alone the ability
to use them. (It's a very long time since Unix beginner meant “has only written one
device driver”.)
In this example, however, using strace(1) reveals
$ strace -e trace=open ./stupid
open("some/file", O_RDONLY) = -1 ENOENT (No such file or directory)
can't open file
$
This is considerably more information than the error message provides. Typically, the
stupid source code looks like this
int fd = open("some/thing", O_RDONLY);
if (fd < 0)
{
fprintf(stderr, "can't open file\n");
exit(1);
}
The user isn't told which file, and also fails to tell the user which error. Was the file
even there? Was there a permissions problem? It does tell you it was trying to open a
file, but that was probably by accident.
Grab your clue stick and go beat the larval programmer with it. Tell him about perror(3).
The next time you use the program you see a different error message:
$ ./stupid
open: No such file or directory
$
Progress, but not what we expected. How can the user fix the problem if the error message
doesn't tell him what the problem was? Looking at the source, we see
int fd = open("some/thing", O_RDONLY);
if (fd < 0)
{
perror("open");
exit(1);
}
Time for another run with the clue stick. This time, the error message takes one step
forward and one step back:
$ ./stupid
some/thing: No such file or directory
$
Now we know the file it was trying to open, but are no longer informed that it was open(2)
that failed. In this case it is probably not significant, but it can be significant for
other system calls. It could have been creat(2) instead, an operation implying that
different permissions are necessary.
const char *filename = "some/thing";
int fd = open(filename, O_RDONLY);
if (fd < 0)
{
perror(filename);
exit(1);
}
The above example code is unfortunately typical of non‐larval programmers as well. Time
to tell our padawan learner about the strerror(3) system call.
$ ./stupid
open some/thing: No such file or directory
$
This maximizes the information that can be presented to the user. The code looks like
this:
const char *filename = "some/thing";
int fd = open(filename, O_RDONLY);
if (fd < 0)
{
fprintf(stderr, "open %s: %s\n", filename, strerror(errno));
exit(1);
}
Now we have the system call, the filename, and the error string. This contains all the
information that strace(1) printed. That's as good as it gets.
Or is it?
Limitations of perror and strerror
The problem the author saw, back in the 1980s, was that the error message is incomplete.
Does “no such file or directory” refer to the “some” directory, or to the “thing” file in
the “some” directory?
A quick look at the man page for strerror(3) is telling:
strerror - return string describing error number
Note well: it is describing the error number, not the error.
On the other hand, the kernel knows what the error was. There was a specific point in the
kernel code, caused by a specific condition, where the kernel code branched and said “no”.
Could a user‐space program figure out the specific condition and write a better error
message?
However, the problem goes deeper. What if the problem occurs during the read(2) system
call, rather than the open(2) call? It is simple for the error message associated with
open(2) to include the file name, it's right there. But to be able to include a file name
in the error associated with the read(2) system call, you have to pass the file name all
the way down the call stack, as well as the file descriptor.
And here is the bit that grates: the kernel already knows what file name the file
descriptor is associated with. Why should a programmer have to pass redundant data all
the way down the call stack just to improve an error message that may never be issued? In
reality, many programmers don't bother, and the resulting error messages are the worse for
it.
But that was the 1980s, on a PDP11, with limited resources and no shared libraries. Back
then, no flavor of Unix included /proc even in rudimentary form, and the lsof(1) program
was over a decade away. So the idea was shelved as impractical.
Level Infinity Support
Imagine that you are level infinity support. Your job description says that you never
ever have to talk to users. Why, then, is there still a constant stream of people wanting
you, the local Unix guru, to decipher yet another error message?
Strangely, 25 years later, despite a simple permissions system, implemented with complete
consistency, most Unix users still have no idea how to decode “No such file or directory”,
or any of the other cryptic error messages they see every day. Or, at least, cryptic to
them.
Wouldn't it be nice if first level tech support didn't need error messages deciphered?
Wouldn't it be nice to have error messages that users could understand without calling
tech support?
These days /proc on Linux is more than able to provide the information necessary to decode
the vast majority of error messages, and point the user to the proximate cause of their
problem. On systems with a limited /proc implementation, the lsof(1) command can fill in
many of the gaps.
In 2008, the stream of translation requests happened to the author way too often. It was
time to re‐examine that 25 year old idea, and libexplain is the result.
USING THE LIBRARY
The interface to the library tries to be consistent, where possible. Let's start with an
example using strerror(3):
if (rename(old_path, new_path) < 0)
{
fprintf(stderr, "rename %s %s: %s\n", old_path, new_path,
strerror(errno));
exit(1);
}
The idea behind libexplain is to provide a strerror(3) equivalent for each system call,
tailored specifically to that system call, so that it can provide a more detailed error
message, containing much of the information you see under the “ERRORS” heading of section
2 and 3 man pages, supplemented with information about actual conditions, actual argument
values, and system limits.
The Simple Case
The strerror(3) replacement:
if (rename(old_path, new_path) < 0)
{
fprintf(stderr, "%s\n", explain_rename(old_path, new_path));
exit(1);
}
The Errno Case
It is also possible to pass an explicit errno(3) value, if you must first do some
processing that would disturb errno, such as error recovery:
if (rename(old_path, new_path < 0))
{
int old_errno = errno;
...code that disturbs errno...
fprintf(stderr, "%s\n", explain_errno_rename(old_errno,
old_path, new_path));
exit(1);
}
The Multi‐thread Cases
Some applications are multi‐threaded, and thus are unable to share libexplain's internal
buffer. You can supply your own buffer using
if (unlink(pathname))
{
char message[3000];
explain_message_unlink(message, sizeof(message), pathname);
error_dialog(message);
return -1;
}
And for completeness, both errno(3) and thread‐safe:
ssize_t nbytes = read(fd, data, sizeof(data));
if (nbytes < 0)
{
char message[3000];
int old_errno = errno;
...error recovery...
explain_message_errno_read(message, sizeof(message),
old_errno, fd, data, sizeof(data));
error_dialog(message);
return -1;
}
These are replacements for strerror_r(3), on systems that have it.
Interface Sugar
A set of functions added as convenience functions, to woo programmers to use the
libexplain library, turn out to be the author's most commonly used libexplain functions in
command line programs:
int fd = explain_creat_or_die(filename, 0666);
This function attempts to create a new file. If it can't, it prints an error message and
exits with EXIT_FAILURE. If there is no error, it returns the new file descriptor.
A related function:
int fd = explain_creat_on_error(filename, 0666);
will print the error message on failure, but also returns the original error result, and
errno(3) is unmolested, as well.
All the other system calls
In general, every system call has its own include file
#include <libexplain/name.h>
that defines function prototypes for six functions:
• explain_name,
• explain_errno_name,
• explain_message_name,
• explain_message_errno_name,
• explain_name_or_die and
• explain_name_on_error.
Every function prototype has Doxygen documentation, and this documentation is not stripped
when the include files are installed.
The wait(2) system call (and friends) have some extra variants that also interpret failure
to be an exit status that isn't EXIT_SUCCESS. This applies to system(3) and pclose(3) as
well.
Coverage includes 221 system calls and 547 ioctl requests. There are many more system
calls yet to implement. System calls that never return, such as exit(2), are not present
in the library, and will never be. The exec family of system calls are supported, because
they return when there is an error.
Cat
This is what a hypothetical “cat” program could look like, with full error reporting,
using libexplain.
#include <libexplain/libexplain.h>
#include <stdlib.h>
#include <unistd.h>
There is one include for libexplain, plus the usual suspects. (If you wish to reduce the
preprocessor load, you can use the specific <libexplain/name.h> includes.)
static void
process(FILE *fp)
{
for (;;)
{
char buffer[4096];
size_t n = explain_fread_or_die(buffer, 1, sizeof(buffer), fp);
if (!n)
break;
explain_fwrite_or_die(buffer, 1, n, stdout);
}
}
The process function copies a file stream to the standard output. Should an error occur
for either reading or writing, it is reported (and the pathname will be included in the
error) and the command exits with EXIT_FAILURE. We don't even worry about tracking the
pathnames, or passing them down the call stack.
int
main(int argc, char **argv)
{
for (;;)
{
int c = getopt(argc, argv, "o:");
if (c == EOF)
break;
switch (c)
{
case 'o':
explain_freopen_or_die(optarg, "w", stdout);
break;
The fun part of this code is that libexplain can report errors including the pathname even
if you don't explicitly re‐open stdout as is done here. We don't even worry about
tracking the file name.
default:
fprintf(stderr, "Usage: %ss [ -o <filename> ] <filename>...\n",
argv[0]);
return EXIT_FAILURE;
}
}
if (optind == argc)
process(stdin);
else
{
while (optind < argc)
{
FILE *fp = explain_fopen_or_die(argv[optind]++, "r");
process(fp);
explain_fclose_or_die(fp);
}
}
The standard output will be closed implicitly, but too late for an error report to be
issued, so we do that here, just in case the buffered I/O hasn't written anything yet, and
there is an ENOSPC error or something.
explain_fflush_or_die(stdout);
return EXIT_SUCCESS;
}
That's all. Full error reporting, clear code.
Rusty's Scale of Interface Goodness
For those of you not familiar with it, Rusty Russel's “How Do I Make This Hard to Misuse?”
page is a must‐read for API designers.
http://ozlabs.org/~rusty/index.cgi/tech/2008‐03‐30.html
10. It's impossible to get wrong.
Goals need to be set high, ambitiously high, lest you accomplish them and think you are
finished when you are not.
The libexplain library detects bogus pointers and many other bogus system call parameters,
and generally tries to avoid segfaults in even the most trying circumstances.
The libexplain library is designed to be thread safe. More real‐world use will likely
reveal places this can be improved.
The biggest problem is with the actual function names themselves. Because C does not have
name‐spaces, the libexplain library always uses an explain_ name prefix. This is the
traditional way of creating a pseudo‐name‐space in order to avoid symbol conflicts.
However, it results in some unnatural‐sounding names.
9. The compiler or linker won't let you get it wrong.
A common mistake is to use explain_open where explain_open_or_die was intended.
Fortunately, the compiler will often issue a type error at this point (e.g. can't assign
const char * rvalue to an int lvalue).
8. The compiler will warn if you get it wrong.
If explain_rename is used when explain_rename_or_die was intended, this can cause other
problems. GCC has a useful warn_unused_result function attribute, and the libexplain
library attaches it to all the explain_name function calls to produce a warning when you
make this mistake. Combine this with gcc -Werror to promote this to level 9 goodness.
7. The obvious use is (probably) the correct one.
The function names have been chosen to convey their meaning, but this is not always
successful. While explain_name_or_die and explain_name_on_error are fairly descriptive,
the less‐used thread safe variants are harder to decode. The function prototypes help the
compiler towards understanding, and the Doxygen comments in the header files help the user
towards understanding.
6. The name tells you how to use it.
It is particularly important to read explain_name_or_die as “explain (name or die)”.
Using a consistent explain_ name‐space prefix has some unfortunate side‐effects in the
obviousness department, as well.
The order of words in the names also indicate the order of the arguments. The argument
lists always end with the same arguments as passed to the system call; all of them. If
_errno_ appears in the name, its argument always precedes the system call arguments. If
_message_ appears in the name, its two arguments always come first.
5. Do it right or it will break at runtime.
The libexplain library detects bogus pointers and many other bogus system call parameters,
and generally tries to avoid segfaults in even the most trying circumstances. It should
never break at runtime, but more real‐world use will no doubt improve this.
Some error messages are aimed at developers and maintainers rather than end users, as this
can assist with bug resolution. Not so much “break at runtime” as “be informative at
runtime” (after the system call barfs).
4. Follow common convention and you'll get it right.
Because C does not have name‐spaces, the libexplain library always uses an explain_ name
prefix. This is the traditional way of creating a pseudo‐name‐space in order to avoid
symbol conflicts.
The trailing arguments of all the libexplain call are identical to the system call they
are describing. This is intended to provide a consistent convention in common with the
system calls themselves.
3. Read the documentation and you'll get it right.
The libexplain library aims to have complete Doxygen documentation for each and every
public API call (and internally as well).
MESSAGE CONTENT
Working on libexplain is a bit like looking at the underside of your car when it is up on
the hoist at the mechanic's. There's some ugly stuff under there, plus mud and crud, and
users rarely see it. A good error message needs to be informative, even for a user who
has been fortunate enough not to have to look at the under‐side very often, and also
informative for the mechanic listening to the user's description over the phone. This is
no easy task.
Revisiting our first example, the code would like this if it uses libexplain:
int fd = explain_open_or_die("some/thing", O_RDONLY, 0);
will fail with an error message like this
open(pathname = "some/file", flags = O_RDONLY) failed, No such file or directory
(2, ENOENT) because there is no "some" directory in the current directory
This breaks down into three pieces
system‐call failed, system‐error because
explanation
Before Because
It is possible to see the part of the message before “because” as overly technical to non‐
technical users, mostly as a result of accurately printing the system call itself at the
beginning of the error message. And it looks like strace(1) output, for bonus geek
points.
open(pathname = "some/file", flags = O_RDONLY) failed, No such file or directory
(2, ENOENT)
This part of the error message is essential to the developer when he is writing the code,
and equally important to the maintainer who has to read bug reports and fix bugs in the
code. It says exactly what failed.
If this text is not presented to the user then the user cannot copy‐and‐paste it into a
bug report, and if it isn't in the bug report the maintainer can't know what actually went
wrong.
Frequently tech staff will use strace(1) or truss(1) to get this exact information, but
this avenue is not open when reading bug reports. The bug reporter's system is far far
away, and, by now, in a far different state. Thus, this information needs to be in the
bug report, which means it must be in the error message.
The system call representation also gives context to the rest of the message. If need
arises, the offending system call argument may be referred to by name in the explanation
after “because”. In addition, all strings are fully quoted and escaped C strings, so
embedded newlines and non‐printing characters will not cause the user's terminal to go
haywire.
The system‐error is what comes out of strerror(2), plus the error symbol. Impatient and
expert sysadmins could stop reading at this point, but the author's experience to date is
that reading further is rewarding. (If it isn't rewarding, it's probably an area of
libexplain that can be improved. Code contributions are welcome, of course.)
After Because
This is the portion of the error message aimed at non‐technical users. It looks beyond
the simple system call arguments, and looks for something more specific.
there is no "some" directory in the current directory
This portion attempts to explain the proximal cause of the error in plain language, and it
is here that internationalization is essential.
In general, the policy is to include as much information as possible, so that the user
doesn't need to go looking for it (and doesn't leave it out of the bug report).
Internationalization
Most of the error messages in the libexplain library have been internationalized. There
are no localizations as yet, so if you want the explanations in your native language,
please contribute.
The “most of” qualifier, above, relates to the fact that the proof‐of‐concept
implementation did not include internationalization support. The code base is being
revised progressively, usually as a result of refactoring messages so that each error
message string appears in the code exactly once.
Provision has been made for languages that need to assemble the portions of
system‐call failed, system‐error because explanation
in different orders for correct grammar in localized error messages.
Postmortem
There are times when a program has yet to use libexplain, and you can't use strace(1)
either. There is an explain(1) command included with libexplain that can be used to
decipher error messages, if the state of the underlying system hasn't changed too much.
$ explain rename foo /tmp/bar/baz -e ENOENT
rename(oldpath = "foo", newpath = "/tmp/bar/baz") failed, No such file or directory
(2, ENOENT) because there is no "bar" directory in the newpath "/tmp" directory
$
Note how the path ambiguity is resolved by using the system call argument name. Of
course, you have to know the error and the system call for explain(1) to be useful. As an
aside, this is one of the ways used by the libexplain automatic test suite to verify that
libexplain is working.
Philosophy
“Tell me everything, including stuff I didn't know to look for.”
The library is implemented in such a way that when statically linked, only the code you
actually use will be linked. This is achieved by having one function per source file,
whenever feasible.
When it is possible to supply more information, libexplain will do so. The less the user
has to track down for themselves, the better. This means that UIDs are accompanied by the
user name, GIDs are accompanied by the group name, PIDs are accompanied by the process
name, file descriptors and streams are accompanied by the pathname, etc.
When resolving paths, if a path component does not exist, libexplain will look for similar
names, in order to suggest alternatives for typographical errors.
The libexplain library tries to use as little heap as possible, and usually none. This is
to avoid perturbing the process state, as far as possible, although sometimes it is
unavoidable.
The libexplain library attempts to be thread safe, by avoiding global variables, keeping
state on the stack as much as possible. There is a single common message buffer, and the
functions that use it are documented as not being thread safe.
The libexplain library does not disturb a process's signal handlers. This makes
determining whether a pointer would segfault a challenge, but not impossible.
When information is available via a system call as well as available through a /proc
entry, the system call is preferred. This is to avoid disturbing the process's state.
There are also times when no file descriptors are available.
The libexplain library is compiled with large file support. There is no large/small
schizophrenia. Where this affects the argument types in the API, and error will be issued
if the necessary large file defines are absent.
FIXME: Work is needed to make sure that file system quotas are handled in the code. This
applies to some getrlimit(2) boundaries, as well.
There are cases when relatives paths are uninformative. For example: system daemons,
servers and background processes. In these cases, absolute paths are used in the error
explanations.
PATH RESOLUTION
Short version: see path_resolution(7).
Long version: Most users have never heard of path_resolution(7), and many advanced users
have never read it. Here is an annotated version:
Step 1: Start of the resolution process
If the pathname starts with the slash (“/”) character, the starting lookup directory is
the root directory of the calling process.
If the pathname does not start with the slash(“/”) character, the starting lookup
directory of the resolution process is the current working directory of the process.
Step 2: Walk along the path
Set the current lookup directory to the starting lookup directory. Now, for each non‐
final component of the pathname, where a component is a substring delimited by slash (“/”)
characters, this component is looked up in the current lookup directory.
If the process does not have search permission on the current lookup directory, an EACCES
error is returned ("Permission denied").
open(pathname = "/home/archives/.ssh/private_key", flags = O_RDONLY) failed,
Permission denied (13, EACCES) because the process does not have search permission
to the pathname "/home/archives/.ssh" directory, the process effective GID 1000
"pmiller" does not match the directory owner 1001 "archives" so the owner
permission mode "rwx" is ignored, the others permission mode is "---", and the
process is not privileged (does not have the DAC_READ_SEARCH capability)
If the component is not found, an ENOENT error is returned ("No such file or directory").
unlink(pathname = "/home/microsoft/rubbish") failed, No such file or directory (2,
ENOENT) because there is no "microsoft" directory in the pathname "/home" directory
There is also some support for users when they mis‐type pathnames, making suggestions when
ENOENT is returned:
open(pathname = "/user/include/fcntl.h", flags = O_RDONLY) failed, No such file or
directory (2, ENOENT) because there is no "user" directory in the pathname "/"
directory, did you mean the "usr" directory instead?
If the component is found, but is neither a directory nor a symbolic link, an ENOTDIR
error is returned ("Not a directory").
open(pathname = "/home/pmiller/.netrc/lca", flags = O_RDONLY) failed, Not a
directory (20, ENOTDIR) because the ".netrc" regular file in the pathname
"/home/pmiller" directory is being used as a directory when it is not
If the component is found and is a directory, we set the current lookup directory to that
directory, and go to the next component.
If the component is found and is a symbolic link (symlink), we first resolve this symbolic
link (with the current lookup directory as starting lookup directory). Upon error, that
error is returned. If the result is not a directory, an ENOTDIR error is returned.
unlink(pathname = "/tmp/dangling/rubbish") failed, No such file or directory (2,
ENOENT) because the "dangling" symbolic link in the pathname "/tmp" directory
refers to "nowhere" that does not exist
If the resolution of the symlink is successful and returns a directory, we set the current
lookup directory to that directory, and go to the next component. Note that the
resolution process here involves recursion. In order to protect the kernel against stack
overflow, and also to protect against denial of service, there are limits on the maximum
recursion depth, and on the maximum number of symbolic links followed. An ELOOP error is
returned when the maximum is exceeded ("Too many levels of symbolic links").
open(pathname = "/tmp/dangling", flags = O_RDONLY) failed, Too many levels of
symbolic links (40, ELOOP) because a symbolic link loop was encountered in
pathname, starting at "/tmp/dangling"
It is also possible to get an ELOOP or EMLINK error if there are too many symlinks, but no
loop was detected.
open(pathname = "/tmp/rabbit‐hole", flags = O_RDONLY) failed, Too many levels of
symbolic links (40, ELOOP) because too many symbolic links were encountered in
pathname (8)
Notice how the actual limit is also printed.
Step 3: Find the final entry
The lookup of the final component of the pathname goes just like that of all other
components, as described in the previous step, with two differences:
(i) The final component need not be a directory (at least as far as the path resolution
process is concerned. It may have to be a directory, or a non‐directory, because of
the requirements of the specific system call).
(ii)
It is not necessarily an error if the final component is not found; maybe we are just
creating it. The details on the treatment of the final entry are described in the
manual pages of the specific system calls.
(iii)
It is also possible to have a problem with the last component if it is a symbolic link
and it should not be followed. For example, using the open(2) O_NOFOLLOW flag:
open(pathname = "a‐symlink", flags = O_RDONLY | O_NOFOLLOW) failed, Too many levels of
symbolic links (ELOOP) because O_NOFOLLOW was specified but pathname refers to a
symbolic link
(iv)
It is common for users to make mistakes when typing pathnames. The libexplain library
attempts to make suggestions when ENOENT is returned, for example:
open(pathname = "/usr/include/filecontrl.h", flags = O_RDONLY) failed, No such file or
directory (2, ENOENT) because there is no "filecontrl.h" regular file in the pathname
"/usr/include" directory, did you mean the "fcntl.h" regular file instead?
(v) It is also possible that the final component is required to be something other than a
regular file:
readlink(pathname = "just‐a‐file", data = 0x7F930A50, data_size = 4097) failed,
Invalid argument (22, EINVAL) because pathname is a regular file, not a symbolic link
(vi)
FIXME: handling of the "t" bit.
Limits
There are a number of limits with regards to pathnames and filenames.
Pathname length limit
There is a maximum length for pathnames. If the pathname (or some intermediate
pathname obtained while resolving symbolic links) is too long, an ENAMETOOLONG
error is returned ("File name too long"). Notice how the system limit is included
in the error message.
open(pathname = "very...long", flags = O_RDONLY) failed, File name too long (36,
ENAMETOOLONG) because pathname exceeds the system maximum path length (4096)
Filename length limit
Some Unix variants have a limit on the number of bytes in each path component.
Some of them deal with this silently, and some give ENAMETOOLONG; the libexplain
library uses pathconf(3) _PC_NO_TRUNC to tell which. If this error happens, the
libexplain library will state the limit in the error message, the limit is
obtained from pathconf(3) _PC_NAME_MAX. Notice how the system limit is included
in the error message.
open(pathname = "system7/only-had-14-characters", flags = O_RDONLY) failed, File
name too long (36, ENAMETOOLONG) because "only-had-14-characters" component is
longer than the system limit (14)
Empty pathname
In the original Unix, the empty pathname referred to the current directory.
Nowadays POSIX decrees that an empty pathname must not be resolved successfully.
open(pathname = "", flags = O_RDONLY) failed, No such file or directory (2,
ENOENT) because POSIX decrees that an empty pathname must not be resolved
successfully
Permissions
The permission bits of a file consist of three groups of three bits. The first group of
three is used when the effective user ID of the calling process equals the owner ID of the
file. The second group of three is used when the group ID of the file either equals the
effective group ID of the calling process, or is one of the supplementary group IDs of the
calling process. When neither holds, the third group is used.
open(pathname = "/etc/passwd", flags = O_WRONLY) failed, Permission denied (13,
EACCES) because the process does not have write permission to the "passwd" regular
file in the pathname "/etc" directory, the process effective UID 1000 "pmiller"
does not match the regular file owner 0 "root" so the owner permission mode "rw-"
is ignored, the others permission mode is "r--", and the process is not privileged
(does not have the DAC_OVERRIDE capability)
Some considerable space is given to this explanation, as most users do not know that this
is how the permissions system works. In particular: the owner, group and other
permissions are exclusive, they are not “OR”ed together.
STRANGE AND INTERESTING SYSTEM CALLS
The process of writing a specific error handler for each system call often reveals
interesting quirks and boundary conditions, or obscure errno(3) values.
ENOMEDIUM, No medium found
The act of copying a CD was the source of the title for this paper.
$ dd if=/dev/cdrom of=fubar.iso
dd: opening “/dev/cdrom”: No medium found
$
The author wondered why his computer was telling him there is no such thing as a psychic
medium. Quite apart from the fact that huge numbers of native English speakers are not
even aware that “media” is a plural, let alone that “medium” is its singular, the string
returned by strerror(3) for ENOMEDIUM is so terse as to be almost completely free of
content.
When open(2) returns ENOMEDIUM it would be nice if the libexplain library could expand a
little on this, based on the type of drive it is. For example:
... because there is no disk in the floppy drive
... because there is no disc in the CD‐ROM drive
... because there is no tape in the tape drive
... because there is no memory stick in the card reader
And so it came to pass...
open(pathname = "/dev/cdrom", flags = O_RDONLY) failed, No medium found (123,
ENOMEDIUM) because there does not appear to be a disc in the CD‐ROM drive
The trick, that the author was previously unaware of, was to open the device using the
O_NONBLOCK flag, which will allow you to open a drive with no medium in it. You then
issue device specific ioctl(2) requests until you figure out what the heck it is. (Not
sure if this is POSIX, but it also seems to work that way in BSD and Solaris, according to
the wodim(1) sources.)
Note also the differing uses of “disk” and “disc” in context. The CD standard originated
in France, but everything else has a “k”.
EFAULT, Bad address
Any system call that takes a pointer argument can return EFAULT. The libexplain library
can figure out which argument is at fault, and it does it without disturbing the process
(or thread) signal handling.
When available, the mincore(2) system call is used, to ask if the memory region is valid.
It can return three results: mapped but not in physical memory, mapped and in physical
memory, and not mapped. When testing the validity of a pointer, the first two are “yes”
and the last one is “no”.
Checking C strings are more difficult, because instead of a pointer and a size, we only
have a pointer. To determine the size we would have to find the NUL, and that could
segfault, catch‐22.
To work around this, the libexplain library uses the lstat(2) sysem call (with a known
good second argument) to test C strings for validity. A failure return && errno == EFAULT
is a “no”, and anythng else is a “yes”. This, of course limits strings to PATH_MAX
characters, but that usually isn't a problem for the libexplain library, because that is
almost always the longest strings it cares about.
EMFILE, Too many open files
This error occurs when a process already has the maximum number of file descriptors open.
If the actual limit is to be printed, and the libexplain library tries to, you can't open
a file in /proc to read what it is.
open_max = sysconf(_SC_OPEN_MAX);
This one wasn't so difficult, there is a sysconf(3) way of obtaining the limit.
ENFILE, Too many open files in system
This error occurs when the system limit on the total number of open files has been
reached. In this case there is no handy sysconf(3) way of obtain the limit.
Digging deeper, one may discover that on Linux there is a /proc entry we could read to
obtain this value. Catch‐22: we are out of file descriptors, so we can't open a file to
read the limit.
On Linux there is a system call to obtain it, but it has no [e]glibc wrapper function, so
you have to all it very carefully:
long
explain_maxfile(void)
{
#ifdef __linux__
struct __sysctl_args args;
int32_t maxfile;
size_t maxfile_size = sizeof(maxfile);
int name[] = { CTL_FS, FS_MAXFILE };
memset(&args, 0, sizeof(struct __sysctl_args));
args.name = name;
args.nlen = 2;
args.oldval = &maxfile;
args.oldlenp = &maxfile_size;
if (syscall(SYS__sysctl, &args) >= 0)
return maxfile;
#endif
return -1;
}
This permits the limit to be included in the error message, when available.
EINVAL “Invalid argument” vs ENOSYS “Function not implemented”
Unsupported actions (such as symlink(2) on a FAT file system) are not reported
consistently from one system call to the next. It is possible to have either EINVAL or
ENOSYS returned.
As a result, attention must be paid to these error cases to get them right, particularly
as the EINVAL could also be referring to problems with one or more system call arguments.
Note that errno(3) is not always set
There are times when it is necessary to read the [e]glibc sources to determine how and
when errors are returned for some system calls.
feof(3), fileno(3)
It is often assumed that these functions cannot return an error. This is only true if
the stream argument is valid, however they are capable of detecting an invalid
pointer.
fpathconf(3), pathconf(3)
The return value of fpathconf(2) and pathconf(2) could legitimately be -1, so it is
necessary to see if errno(3) has been explicitly set.
ioctl(2)
The return value of ioctl(2) could legitimately be -1, so it is necessary to see if
errno(3) has been explicitly set.
readdir(3)
The return value of readdir(3) is NULL for both errors and end‐of‐file. It is
necessary to see if errno(3) has been explicitly set.
setbuf(3), setbuffer(3), setlinebuf(3), setvbuf(3)
All but the last of these functions return void. And setvbuf(3) is only documented as
returning “non‐zero” on error. It is necessary to see if errno(3) has been explicitly
set.
strtod(3), strtol(3), strtold(3), strtoll(3), strtoul(3), strtoull(3)
These functions return 0 on error, but that is also a legitimate return value. It is
necessary to see if errno(3) has been explicitly set.
ungetc(3)
While only a single character of backup is mandated by the ANSI C standard, it turns
out that [e]glibc permits more... but that means it can fail with ENOMEM. It can
also fail with EBADF if fp is bogus. Most difficult of all, if you pass EOF an error
return occurs, but errno is not set.
The libexplain library detects all of these errors correctly, even in cases where the
error values are poorly documented, if at all.
ENOSPC, No space left on device
When this error refers to a file on a file system, the libexplain library prints the mount
point of the file system with the problem. This can make the source of the error much
clearer.
write(fildes = 1 "example", data = 0xbfff2340, data_size = 5) failed, No space left
on device (28, ENOSPC) because the file system containing fildes ("/home") has no
more space for data
As more special device support is added, error messages are expected to include the device
name and actual size of the device.
EROFS, Read‐only file system
When this error refers to a file on a file system, the libexplain library prints the mount
point of the file system with the problem. This can make the source of the error much
clearer.
As more special device support is added, error messages are expected to include the device
name and type.
open(pathname = "/dev/fd0", O_RDWR, 0666) failed, Read‐only file system (30, EROFS)
because the floppy disk has the write protect tab set
...because a CD‐ROM is not writable
...because the memory card has the write protect tab set
...because the ½ inch magnetic tape does not have a write ring
rename
The rename(2) system call is used to change the location or name of a file, moving it
between directories if required. If the destination pathname already exists it will be
atomically replaced, so that there is no point at which another process attempting to
access it will find it missing.
There are limitations, however: you can only rename a directory on top of another
directory if the destination directory is not empty.
rename(oldpath = "foo", newpath = "bar") failed, Directory not empty (39,
ENOTEMPTY) because newpath is not an empty directory; that is, it contains entries
other than "." and ".."
You can't rename a directory on top of a non‐directory, either.
rename(oldpath = "foo", newpath = "bar") failed, Not a directory (20, ENOTDIR)
because oldpath is a directory, but newpath is a regular file, not a directory
Nor is the reverse allowed
rename(oldpath = "foo", newpath = "bar") failed, Is a directory (21, EISDIR)
because newpath is a directory, but oldpath is a regular file, not a directory
This, of course, makes the libexplain library's job more complicated, because the
unlink(2) or rmdir(2) system call is called implicitly by rename(2), and so all of the
unlink(2) or rmdir(2) errors must be detected and handled, as well.
dup2
The dup2(2) system call is used to create a second file descriptor that references the
same object as the first file descriptor. Typically this is used to implement shell input
and output redirection.
The fun thing is that, just as rename(2) can atomically rename a file on top of an
existing file and remove the old file, dup2(2) can do this onto an already‐open file
descriptor.
Once again, this makes the libexplain library's job more complicated, because the close(2)
system call is called implicitly by dup2(2), and so all of close(2)'s errors must be
detected and handled, as well.
ADVENTURES IN IOCTL SUPPORT
The ioctl(2) system call provides device driver authors with a way to communicate with
user‐space that doesn't fit within the existing kernel API. See ioctl_list(2).
Decoding Request Numbers
From a cursory look at the ioctl(2) interface, there would appear to be a large but finite
number of possible ioctl(2) requests. Each different ioctl(2) request is effectively
another system call, but without any type‐safety at all - the compiler can't help a
programmer get these right. This was probably the motivation behind tcflush(3) and
friends.
The initial impression is that you could decode ioctl(2) requests using a huge switch
statement. This turns out to be infeasible because one very rapidly discovers that it is
impossible to include all of the necessary system headers defining the various ioctl(2)
requests, because they have a hard time playing nicely with each other.
A deeper look reveals that there is a range of “private” request numbers, and device
driver authors are encouraged to use them. This means that there is a far larger possible
set of requests, with ambiguous request numbers, than are immediately apparent. Also,
there are some historical ambiguities as well.
We already knew that the switch was impractical, but now we know that to select the
appropriate request name and explanation we must consider not only the request number but
also the file descriptor.
The implementation of ioctl(2) support within the libexplain library is to have a table of
pointers to ioctl(2) request descriptors. Each of these descriptors includes an optional
pointer to a disambiguation function.
Each request is actually implemented in a separate source file, so that the necessary
include files are relieved of the obligation to play nicely with others.
Representation
The philosophy behind the libexplain library is to provide as much information as
possible, including an accurate representation of the system call. In the case of
ioctl(2) this means printing the correct request number (by name) and also a correct (or
at least useful) representation of the third argument.
The ioctl(2) prototype looks like this:
int ioctl(int fildes, int request, ...);
which should have your type‐safety alarms going off. Internal to [e]glibc, this is turned
into a variety of forms:
int __ioctl(int fildes, int request, long arg);
int __ioctl(int fildes, int request, void *arg);
and the Linux kernel syscall interface expects
asmlinkage long sys_ioctl(unsigned int fildes, unsigned int request, unsigned long
arg);
The extreme variability of the third argument is a challenge, when the libexplain library
tries to print a representation of that third argument. However, once the request number
has been disambiguated, each entry in the the libexplain library's ioctl table has a
custom print_data function (OO done manually).
Explanations
There are fewer problems determining the explanation to be used. Once the request number
has been disambiguated, each entry in the libexplain library's ioctl table has a custom
print_explanation function (again, OO done manually).
Unlike section 2 and section 3 system calls, most ioctl(2) requests have no errors
documented. This means, to give good error descriptions, it is necessary to read kernel
sources to discover
• what errno(3) values may be returned, and
• the cause of each error.
Because of the OO nature of function call dispatching within the kernel, you need to read
all sources implementing that ioctl(2) request, not just the generic implementation. It
is to be expected that different kernels will have different error numbers and subtly
different error causes.
EINVAL vs ENOTTY
The situation is even worse for ioctl(2) requests than for system calls, with EINVAL and
ENOTTY both being used to indicate that an ioctl(2) request is inappropriate in that
context, and occasionally ENOSYS, ENOTSUP and EOPNOTSUPP (meant to be used for sockets) as
well. There are comments in the Linux kernel sources that seem to indicate a progressive
cleanup is in progress. For extra chaos, BSD adds ENOIOCTL to the confusion.
As a result, attention must be paid to these error cases to get them right, particularly
as the EINVAL could also be referring to problems with one or more system call arguments.
intptr_t
The C99 standard defines an integer type that is guaranteed to be able to hold any pointer
without representation loss.
The above function syscall prototype would be better written
long sys_ioctl(unsigned int fildes, unsigned int request, intptr_t arg);
The problem is the cognitive dissonance induced by device‐specific or file‐system‐specific
ioctl(2) implementations, such as:
long vfs_ioctl(struct file *filp, unsigned int cmd, unsigned long arg);
The majority of ioctl(2) requests actually have an int *arg third argument. But having it
declared long leads to code treating this as long *arg. This is harmless on 32‐bits
(sizeof(long) == sizeof(int)) but nasty on 64‐bits (sizeof(long) != sizeof(int)).
Depending on the endian‐ness, you do or don't get the value you expect, but you always get
a memory scribble or stack scribble as well.
Writing all of these as
int ioctl(int fildes, int request, ...);
int __ioctl(int fildes, int request, intptr_t arg);
long sys_ioctl(unsigned int fildes, unsigned int request, intptr_t arg);
long vfs_ioctl(struct file *filp, unsigned int cmd, intptr_t arg);
emphasizes that the integer is only an integer to represent a quantity that is almost
always an unrelated pointer type.
CONCLUSION
Use libexplain, your users will like it.
COPYRIGHT
libexplain version 1.4
Copyright (C) 2008, 2009, 2010, 2011, 2012, 2013, 2014 Peter Miller
AUTHOR
Written by Peter Miller <pmiller@opensource.org.au>
explain_lca2010(1)