Provided by: lvm2_2.03.16-3ubuntu3.2_amd64 
NAME
lvextend — Add space to a logical volume
SYNOPSIS
lvextend option_args position_args
[ option_args ]
[ position_args ]
--alloc contiguous|cling|cling_by_tags|normal|anywhere|inherit
-A|--autobackup y|n
--commandprofile String
--config String
-d|--debug
--devices PV
--devicesfile String
--driverloaded y|n
-l|--extents [+]Number[PERCENT]
-f|--force
-h|--help
--journal String
--lockopt String
--longhelp
-m|--mirrors Number
-n|--nofsck
--nohints
--nolocking
--nosync
--noudevsync
--poolmetadatasize [+]Size[m|UNIT]
--profile String
-q|--quiet
--reportformat basic|json
-r|--resizefs
-L|--size [+]Size[m|UNIT]
-i|--stripes Number
-I|--stripesize Size[k|UNIT]
-t|--test
--type linear|striped|snapshot|raid|mirror|thin|thin-pool|vdo|vdo-pool|cache|cache-pool|writecache
--usepolicies
-v|--verbose
--version
-y|--yes
DESCRIPTION
lvextend extends the size of an LV. This requires allocating logical extents from the VG's free physical
extents. If the extension adds a new LV segment, the new segment will use the existing segment type of
the LV.
Extending a copy-on-write snapshot LV adds space for COW blocks.
Use lvconvert(8) to change the number of data images in a RAID or mirrored LV.
In the usage section below, --size Size can be replaced with --extents Number. See both descriptions the
options section.
USAGE
Extend an LV by a specified size.
lvextend -L|--size [+]Size[m|UNIT] LV
[ -l|--extents [+]Number[PERCENT] ]
[ -r|--resizefs ]
[ -i|--stripes Number ]
[ -I|--stripesize Size[k|UNIT] ]
[ --poolmetadatasize [+]Size[m|UNIT] ]
[ COMMON_OPTIONS ]
[ PV ... ]
—
Extend an LV by specified PV extents.
lvextend LV PV ...
[ -r|--resizefs ]
[ -i|--stripes Number ]
[ -I|--stripesize Size[k|UNIT] ]
[ COMMON_OPTIONS ]
—
Extend a pool metadata SubLV by a specified size.
lvextend --poolmetadatasize [+]Size[m|UNIT] LV1
[ -i|--stripes Number ]
[ -I|--stripesize Size[k|UNIT] ]
[ COMMON_OPTIONS ]
[ PV ... ]
LV1 types: thinpool
—
Extend an LV according to a predefined policy.
lvextend --usepolicies LV1
[ -r|--resizefs ]
[ COMMON_OPTIONS ]
[ PV ... ]
LV1 types: snapshot thinpool
—
Common options for command:
[ -A|--autobackup y|n ]
[ -f|--force ]
[ -m|--mirrors Number ]
[ -n|--nofsck ]
[ --alloc contiguous|cling|cling_by_tags|normal|anywhere|inherit ]
[ --nosync ]
[ --noudevsync ]
[ --reportformat basic|json ]
[ --type linear|striped|snapshot|raid|mirror|thin|thin-pool|vdo|vdo-pool|cache|cache-pool|
writecache ]
Common options for lvm:
[ -d|--debug ]
[ -h|--help ]
[ -q|--quiet ]
[ -t|--test ]
[ -v|--verbose ]
[ -y|--yes ]
[ --commandprofile String ]
[ --config String ]
[ --devices PV ]
[ --devicesfile String ]
[ --driverloaded y|n ]
[ --journal String ]
[ --lockopt String ]
[ --longhelp ]
[ --nohints ]
[ --nolocking ]
[ --profile String ]
[ --version ]
OPTIONS
--alloc contiguous|cling|cling_by_tags|normal|anywhere|inherit
Determines the allocation policy when a command needs to allocate Physical Extents (PEs) from the
VG. Each VG and LV has an allocation policy which can be changed with vgchange/lvchange, or
overridden on the command line. normal applies common sense rules such as not placing parallel
stripes on the same PV. inherit applies the VG policy to an LV. contiguous requires new PEs be
placed adjacent to existing PEs. cling places new PEs on the same PV as existing PEs in the same
stripe of the LV. If there are sufficient PEs for an allocation, but normal does not use them,
anywhere will use them even if it reduces performance, e.g. by placing two stripes on the same PV.
Optional positional PV args on the command line can also be used to limit which PVs the command
will use for allocation. See lvm(8) for more information about allocation.
-A|--autobackup y|n
Specifies if metadata should be backed up automatically after a change. Enabling this is strongly
advised! See vgcfgbackup(8) for more information.
--commandprofile String
The command profile to use for command configuration. See lvm.conf(5) for more information about
profiles.
--config String
Config settings for the command. These override lvm.conf(5) settings. The String arg uses the
same format as lvm.conf(5), or may use section/field syntax. See lvm.conf(5) for more information
about config.
-d|--debug ...
Set debug level. Repeat from 1 to 6 times to increase the detail of messages sent to the log file
and/or syslog (if configured).
--devices PV
Restricts the devices that are visible and accessible to the command. Devices not listed will
appear to be missing. This option can be repeated, or accepts a comma separated list of devices.
This overrides the devices file.
--devicesfile String
A file listing devices that LVM should use. The file must exist in /etc/lvm/devices/ and is
managed with the lvmdevices(8) command. This overrides the lvm.conf(5) devices/devicesfile and
devices/use_devicesfile settings.
--driverloaded y|n
If set to no, the command will not attempt to use device-mapper. For testing and debugging.
-l|--extents [+]Number[PERCENT]
Specifies the new size of the LV in logical extents. The --size and --extents options are
alternate methods of specifying size. The total number of physical extents used will be greater
when redundant data is needed for RAID levels. An alternate syntax allows the size to be
determined indirectly as a percentage of the size of a related VG, LV, or set of PVs. The suffix
%VG denotes the total size of the VG, the suffix %FREE the remaining free space in the VG, and the
suffix %PVS the free space in the specified PVs. For a snapshot, the size can be expressed as a
percentage of the total size of the origin LV with the suffix %ORIGIN (100%ORIGIN provides space
for the whole origin). When expressed as a percentage, the size defines an upper limit for the
number of logical extents in the new LV. The precise number of logical extents in the new LV is
not determined until the command has completed. When the plus + or minus - prefix is used, the
value is not an absolute size, but is relative and added or subtracted from the current size.
-f|--force ...
Override various checks, confirmations and protections. Use with extreme caution.
-h|--help
Display help text.
--journal String
Record information in the systemd journal. This information is in addition to information enabled
by the lvm.conf log/journal setting. command: record information about the command. output:
record the default command output. debug: record full command debugging.
--lockopt String
Used to pass options for special cases to lvmlockd. See lvmlockd(8) for more information.
--longhelp
Display long help text.
-m|--mirrors Number
Not used.
-n|--nofsck
Do not perform fsck before resizing filesystem when filesystem requires it. You may need to use
--force to proceed with this option.
--nohints
Do not use the hints file to locate devices for PVs. A command may read more devices to find PVs
when hints are not used. The command will still perform standard hint file invalidation where
appropriate.
--nolocking
Disable locking. Use with caution, concurrent commands may produce incorrect results.
--nosync
Causes the creation of mirror, raid1, raid4, raid5 and raid10 to skip the initial synchronization.
In case of mirror, raid1 and raid10, any data written afterwards will be mirrored, but the
original contents will not be copied. In case of raid4 and raid5, no parity blocks will be
written, though any data written afterwards will cause parity blocks to be stored. This is useful
for skipping a potentially long and resource intensive initial sync of an empty
mirror/raid1/raid4/raid5 and raid10 LV. This option is not valid for raid6, because raid6 relies
on proper parity (P and Q Syndromes) being created during initial synchronization in order to
reconstruct proper user date in case of device failures. raid0 and raid0_meta do not provide any
data copies or parity support and thus do not support initial synchronization.
--noudevsync
Disables udev synchronisation. The process will not wait for notification from udev. It will
continue irrespective of any possible udev processing in the background. Only use this if udev is
not running or has rules that ignore the devices LVM creates.
--poolmetadatasize [+]Size[m|UNIT]
Specifies the new size of the pool metadata LV. The plus prefix + can be used, in which case the
value is added to the current size.
--profile String
An alias for --commandprofile or --metadataprofile, depending on the command.
-q|--quiet ...
Suppress output and log messages. Overrides --debug and --verbose. Repeat once to also suppress
any prompts with answer 'no'.
--reportformat basic|json
Overrides current output format for reports which is defined globally by the report/output_format
setting in lvm.conf(5). basic is the original format with columns and rows. If there is more
than one report per command, each report is prefixed with the report name for identification. json
produces report output in JSON format. See lvmreport(7) for more information.
-r|--resizefs
Resize underlying filesystem together with the LV using fsadm(8).
-L|--size [+]Size[m|UNIT]
Specifies the new size of the LV. The --size and --extents options are alternate methods of
specifying size. The total number of physical extents used will be greater when redundant data is
needed for RAID levels. When the plus + or minus - prefix is used, the value is not an absolute
size, but is relative and added or subtracted from the current size.
-i|--stripes Number
Specifies the number of stripes in a striped LV. This is the number of PVs (devices) that a
striped LV is spread across. Data that appears sequential in the LV is spread across multiple
devices in units of the stripe size (see --stripesize). This does not change existing allocated
space, but only applies to space being allocated by the command. When creating a RAID 4/5/6 LV,
this number does not include the extra devices that are required for parity. The largest number
depends on the RAID type (raid0: 64, raid10: 32, raid4/5: 63, raid6: 62), and when unspecified,
the default depends on the RAID type (raid0: 2, raid10: 2, raid4/5: 3, raid6: 5.) To stripe a new
raid LV across all PVs by default, see lvm.conf(5) allocation/raid_stripe_all_devices.
-I|--stripesize Size[k|UNIT]
The amount of data that is written to one device before moving to the next in a striped LV.
-t|--test
Run in test mode. Commands will not update metadata. This is implemented by disabling all
metadata writing but nevertheless returning success to the calling function. This may lead to
unusual error messages in multi-stage operations if a tool relies on reading back metadata it
believes has changed but hasn't.
--type linear|striped|snapshot|raid|mirror|thin|thin-pool|vdo|vdo-pool|cache|cache-pool|writecache
The LV type, also known as "segment type" or "segtype". See usage descriptions for the specific
ways to use these types. For more information about redundancy and performance (raid<N>, mirror,
striped, linear) see lvmraid(7). For thin provisioning (thin, thin-pool) see lvmthin(7). For
performance caching (cache, cache-pool) see lvmcache(7). For copy-on-write snapshots (snapshot)
see usage definitions. For VDO (vdo) see lvmvdo(7). Several commands omit an explicit type
option because the type is inferred from other options or shortcuts (e.g. --stripes, --mirrors,
--snapshot, --virtualsize, --thin, --cache, --vdo). Use inferred types with care because it can
lead to unexpected results.
--usepolicies
Perform an operation according to the policy configured in lvm.conf(5) or a profile.
-v|--verbose ...
Set verbose level. Repeat from 1 to 4 times to increase the detail of messages sent to stdout and
stderr.
--version
Display version information.
-y|--yes
Do not prompt for confirmation interactively but always assume the answer yes. Use with extreme
caution. (For automatic no, see -qq.)
VARIABLES
LV Logical Volume name. See lvm(8) for valid names. An LV positional arg generally includes the VG
name and LV name, e.g. VG/LV. LV1 indicates the LV must have a specific type, where the accepted
LV types are listed. (raid represents raid<N> type).
PV Physical Volume name, a device path under /dev. For commands managing physical extents, a PV
positional arg generally accepts a suffix indicating a range (or multiple ranges) of physical
extents (PEs). When the first PE is omitted, it defaults to the start of the device, and when the
last PE is omitted it defaults to end. Start and end range (inclusive): PV[:PE-PE]... Start and
length range (counting from 0): PV[:PE+PE]...
String See the option description for information about the string content.
Size[UNIT]
Size is an input number that accepts an optional unit. Input units are always treated as base two
values, regardless of capitalization, e.g. 'k' and 'K' both refer to 1024. The default input unit
is specified by letter, followed by |UNIT. UNIT represents other possible input units: b|B is
bytes, s|S is sectors of 512 bytes, k|K is KiB, m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB,
e|E is EiB. (This should not be confused with the output control --units, where capital letters
mean multiple of 1000.)
ENVIRONMENT VARIABLES
See lvm(8) for information about environment variables used by lvm. For example, LVM_VG_NAME can
generally be substituted for a required VG parameter.
EXAMPLES
Extend the size of an LV by 54MiB, using a specific PV.
lvextend -L +54 vg01/lvol10 /dev/sdk3
Extend the size of an LV by the amount of free space on PV /dev/sdk3. This is equivalent to specifying
"-l +100%PVS" on the command line.
lvextend vg01/lvol01 /dev/sdk3
Extend an LV by 16MiB using specific physical extents.
lvextend -L+16m vg01/lvol01 /dev/sda:8-9 /dev/sdb:8-9
Extend an LV to use all remaining free space in volume group and all resize its filesystem with fsadm(8).
lvextend -l+100%FREE -r vg01/lvol01
SEE ALSO
lvm(8), lvm.conf(5), lvmconfig(8), lvmdevices(8),
pvchange(8), pvck(8), pvcreate(8), pvdisplay(8), pvmove(8), pvremove(8), pvresize(8), pvs(8), pvscan(8),
vgcfgbackup(8), vgcfgrestore(8), vgchange(8), vgck(8), vgcreate(8), vgconvert(8), vgdisplay(8),
vgexport(8), vgextend(8), vgimport(8), vgimportclone(8), vgimportdevices(8), vgmerge(8), vgmknodes(8),
vgreduce(8), vgremove(8), vgrename(8), vgs(8), vgscan(8), vgsplit(8),
lvcreate(8), lvchange(8), lvconvert(8), lvdisplay(8), lvextend(8), lvreduce(8), lvremove(8), lvrename(8),
lvresize(8), lvs(8), lvscan(8),
lvm-fullreport(8), lvm-lvpoll(8), blkdeactivate(8), lvmdump(8),
dmeventd(8), lvmpolld(8), lvmlockd(8), lvmlockctl(8), cmirrord(8), lvmdbusd(8), fsadm(8),
lvmsystemid(7), lvmreport(7), lvmraid(7), lvmthin(7), lvmcache(7)