noble (8) vgck.8.gz

NAME

       vgck — Check the consistency of volume group(s)

SYNOPSIS

       vgck option_args position_args
           [ option_args ]
           [ position_args ]

DESCRIPTION

       vgck checks LVM metadata for consistency.

USAGE

       Read and display information about a VG.

       vgck
           [    --reportformat basic|json ]
           [ COMMON_OPTIONS ]
           [ VG|Tag ... ]

       Rewrite VG metadata to correct problems.

       vgck --updatemetadata VG
           [ COMMON_OPTIONS ]

       Common options for lvm:
           [ -d|--debug ]
           [ -h|--help ]
           [ -q|--quiet ]
           [ -t|--test ]
           [ -v|--verbose ]
           [ -y|--yes ]
           [    --commandprofile String ]
           [    --config String ]
           [    --devices PV ]
           [    --devicesfile String ]
           [    --driverloaded y|n ]
           [    --journal String ]
           [    --lockopt String ]
           [    --longhelp ]
           [    --nohints ]
           [    --nolocking ]
           [    --profile String ]
           [    --version ]

OPTIONS

       --commandprofile String
              The  command profile to use for command configuration.  See lvm.conf(5) for more information about
              profiles.

       --config String
              Config settings for the command. These override lvm.conf(5) settings.  The  String  arg  uses  the
              same format as lvm.conf(5), or may use section/field syntax.  See lvm.conf(5) for more information
              about config.

       -d|--debug ...
              Set debug level. Repeat from 1 to 6 times to increase the detail of messages sent to the log  file
              and/or syslog (if configured).

       --devices PV
              Restricts  the  devices  that  are visible and accessible to the command.  Devices not listed will
              appear to be missing. This option can be repeated, or accepts a comma separated list  of  devices.
              This overrides the devices file.

       --devicesfile String
              A  file  listing  devices  that  LVM  should use.  The file must exist in /etc/lvm/devices/ and is
              managed with the lvmdevices(8) command.  This overrides the  lvm.conf(5)  devices/devicesfile  and
              devices/use_devicesfile settings.

       --driverloaded y|n
              If set to no, the command will not attempt to use device-mapper.  For testing and debugging.

       -h|--help
              Display help text.

       --journal String
              Record information in the systemd journal.  This information is in addition to information enabled
              by the lvm.conf log/journal setting.  command: record  information  about  the  command.   output:
              record the default command output.  debug: record full command debugging.

       --lockopt String
              Used to pass options for special cases to lvmlockd.  See lvmlockd(8) for more information.

       --longhelp
              Display long help text.

       --nohints
              Do  not  use the hints file to locate devices for PVs. A command may read more devices to find PVs
              when hints are not used. The command will still perform  standard  hint  file  invalidation  where
              appropriate.

       --nolocking
              Disable locking. Use with caution, concurrent commands may produce incorrect results.

       --profile String
              An alias for --commandprofile or --metadataprofile, depending on the command.

       -q|--quiet ...
              Suppress  output  and log messages. Overrides --debug and --verbose.  Repeat once to also suppress
              any prompts with answer 'no'.

       --reportformat basic|json
              Overrides current output format for reports which is defined globally by the  report/output_format
              setting  in  lvm.conf(5).   basic  is the original format with columns and rows.  If there is more
              than one report per command, each report is prefixed with the report name for identification. json
              produces report output in JSON format. See lvmreport(7) for more information.

       -t|--test
              Run  in  test  mode.  Commands  will  not  update  metadata.  This is implemented by disabling all
              metadata writing but nevertheless returning success to the calling  function.  This  may  lead  to
              unusual  error  messages  in  multi-stage  operations if a tool relies on reading back metadata it
              believes has changed but hasn't.

       --updatemetadata
              Update VG metadata to correct problems.  If VG metadata was updated while a PV  was  missing,  and
              the  PV  reappears  with  an  old version of metadata, then this option (or any other command that
              writes metadata) will update the metadata on the previously missing PV. If a PV was removed from a
              VG  while it was missing, and the PV reappears, using this option will clear the outdated metadata
              from the previously missing PV. If metadata text is damaged on one  PV,  using  this  option  will
              replace the damaged metadata text. For more severe damage, e.g. with headers, see pvck(8).

       -v|--verbose ...
              Set  verbose level. Repeat from 1 to 4 times to increase the detail of messages sent to stdout and
              stderr.

       --version
              Display version information.

       -y|--yes
              Do not prompt for confirmation interactively but always assume the answer yes.  Use  with  extreme
              caution.  (For automatic no, see -qq.)

VARIABLES

       VG     Volume Group name.  See lvm(8) for valid names.

       Tag    Tag name.  See lvm(8) for information about tag names and using tags in place of a VG, LV or PV.

       String See the option description for information about the string content.

       Size[UNIT]
              Size is an input number that accepts an optional unit.  Input units are always treated as base two
              values, regardless of capitalization, e.g. 'k' and 'K' both refer to 1024.  The default input unit
              is  specified  by  letter,  followed by |UNIT.  UNIT represents other possible input units: b|B is
              bytes, s|S is sectors of 512 bytes, k|K is KiB, m|M is MiB, g|G is GiB, t|T is TiB,  p|P  is  PiB,
              e|E  is  EiB.  (This should not be confused with the output control --units, where capital letters
              mean multiple of 1000.)

ENVIRONMENT VARIABLES

       See lvm(8) for information about environment  variables  used  by  lvm.   For  example,  LVM_VG_NAME  can
       generally be substituted for a required VG parameter.

SEE ALSO

       lvm(8), lvm.conf(5), lvmconfig(8), lvmdevices(8),

       pvchange(8), pvck(8), pvcreate(8), pvdisplay(8), pvmove(8), pvremove(8), pvresize(8), pvs(8), pvscan(8),

       vgcfgbackup(8), vgcfgrestore(8), vgchange(8), vgck(8), vgcreate(8), vgconvert(8), vgdisplay(8),
       vgexport(8), vgextend(8), vgimport(8), vgimportclone(8), vgimportdevices(8), vgmerge(8), vgmknodes(8),
       vgreduce(8), vgremove(8), vgrename(8), vgs(8), vgscan(8), vgsplit(8),

       lvcreate(8), lvchange(8), lvconvert(8), lvdisplay(8), lvextend(8), lvreduce(8), lvremove(8), lvrename(8),
       lvresize(8), lvs(8), lvscan(8),

       lvm-fullreport(8), lvm-lvpoll(8), blkdeactivate(8), lvmdump(8),

       dmeventd(8), lvmpolld(8), lvmlockd(8), lvmlockctl(8), cmirrord(8), lvmdbusd(8), fsadm(8),

       lvmsystemid(7), lvmreport(7), lvmraid(7), lvmthin(7), lvmcache(7)