Provided by: lvm2_2.03.16-3ubuntu3.2_amd64 
NAME
lvremove — Remove logical volume(s) from the system
SYNOPSIS
lvremove position_args
[ option_args ]
DESCRIPTION
lvremove removes one or more LVs. For standard LVs, this returns the logical extents that were used by
the LV to the VG for use by other LVs.
Confirmation will be requested before deactivating any active LV prior to removal. LVs cannot be
deactivated or removed while they are open (e.g. if they contain a mounted filesystem). Removing an
origin LV will also remove all dependent snapshots.
When a single force option is used, LVs are removed without confirmation, and the command will try to
deactivate unused LVs.
To remove damaged LVs, two force options may be required (-ff).
Historical LVs
If the configuration setting metadata/record_lvs_history is enabled and the LV being removed forms part
of the history of at least one LV that is still present, then a simplified representation of the LV will
be retained. This includes the time of removal (lv_time_removed reporting field), creation time
(lv_time), name (lv_name), LV uuid (lv_uuid) and VG name (vg_name). This allows later reporting to see
the ancestry chain of thin snapshot volumes, even after some intermediate LVs have been removed. The
names of such historical LVs acquire a hyphen as a prefix (e.g. '-lvol1') and cannot be reactivated. Use
lvremove a second time, with the hyphen, to remove the record of the former LV completely.
USAGE
lvremove VG|LV|Tag|Select ...
[ -A|--autobackup y|n ]
[ -f|--force ]
[ -S|--select String ]
[ --nohistory ]
[ --noudevsync ]
[ --reportformat basic|json ]
[ COMMON_OPTIONS ]
Common options for lvm:
[ -d|--debug ]
[ -h|--help ]
[ -q|--quiet ]
[ -t|--test ]
[ -v|--verbose ]
[ -y|--yes ]
[ --commandprofile String ]
[ --config String ]
[ --devices PV ]
[ --devicesfile String ]
[ --driverloaded y|n ]
[ --journal String ]
[ --lockopt String ]
[ --longhelp ]
[ --nohints ]
[ --nolocking ]
[ --profile String ]
[ --version ]
OPTIONS
-A|--autobackup y|n
Specifies if metadata should be backed up automatically after a change. Enabling this is strongly
advised! See vgcfgbackup(8) for more information.
--commandprofile String
The command profile to use for command configuration. See lvm.conf(5) for more information about
profiles.
--config String
Config settings for the command. These override lvm.conf(5) settings. The String arg uses the
same format as lvm.conf(5), or may use section/field syntax. See lvm.conf(5) for more information
about config.
-d|--debug ...
Set debug level. Repeat from 1 to 6 times to increase the detail of messages sent to the log file
and/or syslog (if configured).
--devices PV
Restricts the devices that are visible and accessible to the command. Devices not listed will
appear to be missing. This option can be repeated, or accepts a comma separated list of devices.
This overrides the devices file.
--devicesfile String
A file listing devices that LVM should use. The file must exist in /etc/lvm/devices/ and is
managed with the lvmdevices(8) command. This overrides the lvm.conf(5) devices/devicesfile and
devices/use_devicesfile settings.
--driverloaded y|n
If set to no, the command will not attempt to use device-mapper. For testing and debugging.
-f|--force ...
Override various checks, confirmations and protections. Use with extreme caution.
-h|--help
Display help text.
--journal String
Record information in the systemd journal. This information is in addition to information enabled
by the lvm.conf log/journal setting. command: record information about the command. output:
record the default command output. debug: record full command debugging.
--lockopt String
Used to pass options for special cases to lvmlockd. See lvmlockd(8) for more information.
--longhelp
Display long help text.
--nohints
Do not use the hints file to locate devices for PVs. A command may read more devices to find PVs
when hints are not used. The command will still perform standard hint file invalidation where
appropriate.
--nohistory
Do not record history of LVs being removed. This has no effect unless the configuration setting
metadata/record_lvs_history is enabled.
--nolocking
Disable locking. Use with caution, concurrent commands may produce incorrect results.
--noudevsync
Disables udev synchronisation. The process will not wait for notification from udev. It will
continue irrespective of any possible udev processing in the background. Only use this if udev is
not running or has rules that ignore the devices LVM creates.
--profile String
An alias for --commandprofile or --metadataprofile, depending on the command.
-q|--quiet ...
Suppress output and log messages. Overrides --debug and --verbose. Repeat once to also suppress
any prompts with answer 'no'.
--reportformat basic|json
Overrides current output format for reports which is defined globally by the report/output_format
setting in lvm.conf(5). basic is the original format with columns and rows. If there is more
than one report per command, each report is prefixed with the report name for identification. json
produces report output in JSON format. See lvmreport(7) for more information.
-S|--select String
Select objects for processing and reporting based on specified criteria. The criteria syntax is
described by --select help and lvmreport(7). For reporting commands, one row is displayed for
each object matching the criteria. See --options help for selectable object fields. Rows can be
displayed with an additional "selected" field (-o selected) showing 1 if the row matches the
selection and 0 otherwise. For non-reporting commands which process LVM entities, the selection
is used to choose items to process.
-t|--test
Run in test mode. Commands will not update metadata. This is implemented by disabling all
metadata writing but nevertheless returning success to the calling function. This may lead to
unusual error messages in multi-stage operations if a tool relies on reading back metadata it
believes has changed but hasn't.
-v|--verbose ...
Set verbose level. Repeat from 1 to 4 times to increase the detail of messages sent to stdout and
stderr.
--version
Display version information.
-y|--yes
Do not prompt for confirmation interactively but always assume the answer yes. Use with extreme
caution. (For automatic no, see -qq.)
VARIABLES
VG Volume Group name. See lvm(8) for valid names. LV Logical Volume name. See lvm(8) for valid names. An LV positional arg generally includes the VG name and LV name, e.g. VG/LV. Tag Tag name. See lvm(8) for information about tag names and using tags in place of a VG, LV or PV. Select Select indicates that a required positional parameter can be omitted if the --select option is used. No arg appears in this position. String See the option description for information about the string content. Size[UNIT] Size is an input number that accepts an optional unit. Input units are always treated as base two values, regardless of capitalization, e.g. 'k' and 'K' both refer to 1024. The default input unit is specified by letter, followed by |UNIT. UNIT represents other possible input units: b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB, m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB. (This should not be confused with the output control --units, where capital letters mean multiple of 1000.)
ENVIRONMENT VARIABLES
See lvm(8) for information about environment variables used by lvm. For example, LVM_VG_NAME can generally be substituted for a required VG parameter.
EXAMPLES
Remove an active LV without asking for confirmation.
lvremove -f vg00/lvol1
Remove all LVs the specified VG.
lvremove vg00
SEE ALSO
lvm(8), lvm.conf(5), lvmconfig(8), lvmdevices(8), pvchange(8), pvck(8), pvcreate(8), pvdisplay(8), pvmove(8), pvremove(8), pvresize(8), pvs(8), pvscan(8), vgcfgbackup(8), vgcfgrestore(8), vgchange(8), vgck(8), vgcreate(8), vgconvert(8), vgdisplay(8), vgexport(8), vgextend(8), vgimport(8), vgimportclone(8), vgimportdevices(8), vgmerge(8), vgmknodes(8), vgreduce(8), vgremove(8), vgrename(8), vgs(8), vgscan(8), vgsplit(8), lvcreate(8), lvchange(8), lvconvert(8), lvdisplay(8), lvextend(8), lvreduce(8), lvremove(8), lvrename(8), lvresize(8), lvs(8), lvscan(8), lvm-fullreport(8), lvm-lvpoll(8), blkdeactivate(8), lvmdump(8), dmeventd(8), lvmpolld(8), lvmlockd(8), lvmlockctl(8), cmirrord(8), lvmdbusd(8), fsadm(8), lvmsystemid(7), lvmreport(7), lvmraid(7), lvmthin(7), lvmcache(7)