Ubuntu Manpage: pvck — Check metadata on physical volumes

Provided by: lvm2_2.03.22-1ubuntu2_amd64

NAME

       pvck — Check metadata on physical volumes

SYNOPSIS

       pvck option_args position_args
           [ option_args ]

           --commandprofile String
           --config String
        -d|--debug
           --devices PV
           --devicesfile String
           --driverloaded y|n
           --dump headers|metadata|metadata_all|metadata_search
        -f|--file String
        -h|--help
           --journal String
           --labelsector Number
           --lockopt String
           --longhelp
           --nohints
           --nolocking
           --profile String
           --[pv]metadatacopies 0|1|2
        -q|--quiet
           --repair
           --repairtype pv_header|metadata|label_header
           --settings String
        -t|--test
        -v|--verbose
           --version
        -y|--yes

DESCRIPTION

pvck checks and repairs LVM metadata on PVs.

Dump options
headers
Print LVM on-disk headers and structures: label_header, pv_header, mda_header(s), and
metadata text. Warnings are printed if any values are incorrect. The label_header and
pv_header both exist in a 512 byte sector, usually the second sector of the device. An
mda_header exists in a 512 byte sector at offset 4096 bytes. A second mda_header can
optionally exist near the end of the device. The metadata text exists in an area (about
1MiB by default) immediately following the mda_header sector. The metadata text is
checked but not printed (see other options).

metadata
Print the current LVM VG metadata text (or save to a file), using headers to locate the
latest copy of metadata. If headers are damaged, metadata may not be found (see
metadata_search). Use --settings "mda_num=2" to look in mda2 (the second mda at the end
of the device, if used). The metadata text is printed to stdout or saved to a file with
--file.

metadata_all
List all versions of VG metadata found in the metadata area, using headers to locate
metadata. Full copies of all metadata are saved to a file with the --file option. If
headers are damaged, metadata may not be found (see metadata_search). Use --settings
"mda_num=2" as above. Use -v to include descriptions and dates when listing metadata
versions.

metadata_search
List all versions of VG metadata found in the metadata area, searching common locations so
metadata can be found if headers are damaged. Full copies of all metadata are saved to a
file with the --file option. To save one specific version of metadata, use --settings
"metadata_offset=<offset>", where the offset is taken from the list of versions found.
Use -v to include descriptions and dates when listing metadata versions.

metadata_area
Save the entire text metadata area to a file without processing.

Repair options
--repair
Repair headers and metadata on a PV. This uses a metadata input file that was extracted
by --dump, or a backup file (from /etc/lvm/backup). When possible, use metadata saved by
--dump from another PV in the same VG (or from a second metadata area on the PV).

There are cases where the PV UUID needs to be specified for the PV being repaired. It is
specified using --settings "pv_uuid=<UUID>". In particular, if the device name for the PV
being repaired does not match the previous device name of the PV, then LVM may not be able
to determine the correct PV UUID. When headers are damaged on more than one PV in a VG,
it is important for the user to determine the correct PV UUID and specify it in
--settings. Otherwise, the wrong PV UUID could be used if device names have been swapped
since the metadata was last written.

If a PV has no metadata areas and the pv_header is damaged, then the repair will not know
to create no metadata areas during repair. It will by default repair metadata in mda1.
To repair with no metadata areas, use --settings "mda_offset=0 mda_size=0".

There are cases where repair should be run on all PVs in the VG (using the same metadata
file): if all PVs in the VG are damaged, if using an old metadata version, or if a backup
file is used instead of raw metadata (taken from pvck dump.)

Using --repair is equivalent to running --repairtype pv_header followed by --repairtype
metadata.

--repairtype pv_header
Repairs the header sector, containing the pv_header and label_header.

--repairtype metadata
Repairs the mda_header and metadata text. It requires the headers to be correct (having
been undamaged or already repaired).

--repairtype label_header
Repairs label_header fields, leaving the pv_header (in the same sector) unchanged.
(repairtype pv_header should usually be used instead.)

Settings
The --settings option controls or overrides certain dump or repair behaviors. All offset
and size values in settings are in bytes (units are not recognized.) These settings are
subject to change.

mda_num=1|2
Select which metadata area should be used. By default the first metadata area (1) is
used. mda1 is always located at offset 4096. mda2, at the end of the device, often does
not exist (it's not created by default.) If mda1 is erased, mda2, if it exists, will often
still have metadata.

metadata_offset=bytes
Select metadata text at this offset. Use with metadata_search to print/save one instance
of metadata text.

mda_offset=bytes mda_size=bytes
Refers to a metadata area (mda) location and size. An mda includes an mda_header and
circular metadata text buffer. Setting this forces metadata_search look for metadata in
the given area instead of the standard locations. When set to zero with repair, it
indicates no metadata areas should exist.

mda2_offset=bytes mda2_size=bytes
When repairing a pv_header, this forces a specific offset and size for mda2 that should be
recorded in the pv_header.

pv_uuid=uuid
Specify the PV UUID of the device being repaired. When not specified, repair will attempt
to determine the correct PV UUID by matching a device name in the metadata.

device_size=bytes
data_offset=bytes
When repairing a pv_header, the device_size, data_offset, and pvid can all be specified
directly, in which case these values are not taken from a metadata file (where they
usually come from), and the metadata file can be omitted. data_offset is the starting
location of the first physical extent (data), which follows the first metadata area.

USAGE

       Check for metadata on a device

       pvck PV ...
           [ COMMON_OPTIONS ]

       —

       Check and print LVM headers and metadata on a device

       pvck --dump headers|metadata|metadata_all|metadata_search PV
           [ -f|--file String ]
           [    --settings String ]
           [    --[pv]metadatacopies 0|1|2 ]
           [ COMMON_OPTIONS ]

       —

       Repair LVM headers or metadata on a device

       pvck --repairtype pv_header|metadata|label_header PV
           [ -f|--file String ]
           [    --settings String ]
           [ COMMON_OPTIONS ]

       —

       Repair LVM headers and metadata on a device

       pvck --repair -f|--file String PV
           [    --settings String ]
           [ COMMON_OPTIONS ]

       —

       Common options for command:
           [    --labelsector Number ]

       Common options for lvm:
           [ -d|--debug ]
           [ -h|--help ]
           [ -q|--quiet ]
           [ -t|--test ]
           [ -v|--verbose ]
           [ -y|--yes ]
           [    --commandprofile String ]
           [    --config String ]
           [    --devices PV ]
           [    --devicesfile String ]
           [    --driverloaded y|n ]
           [    --journal String ]
           [    --lockopt String ]
           [    --longhelp ]
           [    --nohints ]
           [    --nolocking ]
           [    --profile String ]
           [    --version ]

OPTIONS

--commandprofile String
The command profile to use for command configuration. See lvm.conf(5) for more
information about profiles.

--config String
Config settings for the command. These override lvm.conf(5) settings. The String
arg uses the same format as lvm.conf(5), or may use section/field syntax. See
lvm.conf(5) for more information about config.

-d|--debug ...
Set debug level. Repeat from 1 to 6 times to increase the detail of messages sent
to the log file and/or syslog (if configured).

--devices PV
Restricts the devices that are visible and accessible to the command. Devices not
listed will appear to be missing. This option can be repeated, or accepts a comma
separated list of devices. This overrides the devices file.

--devicesfile String
A file listing devices that LVM should use. The file must exist in
/etc/lvm/devices/ and is managed with the lvmdevices(8) command. This overrides
the lvm.conf(5) devices/devicesfile and devices/use_devicesfile settings.

--driverloaded y|n
If set to no, the command will not attempt to use device-mapper. For testing and
debugging.

--dump headers|metadata|metadata_all|metadata_search
Dump headers and metadata from a PV for debugging and repair. Option values
include: headers to print and check LVM headers, metadata to print or save the
current text metadata, metadata_all to list or save all versions of metadata,
metadata_search to list or save all versions of metadata, searching standard
locations in case of damaged headers, metadata_area to save an entire text metadata
area to a file.

-f|--file String
Metadata file to read or write.

-h|--help
Display help text.

--journal String
Record information in the systemd journal. This information is in addition to
information enabled by the lvm.conf log/journal setting. command: record
information about the command. output: record the default command output. debug:
record full command debugging.

--labelsector Number
By default the PV is labelled with an LVM2 identifier in its second sector (sector
1). This lets you use a different sector near the start of the disk (between 0 and
3 inclusive - see LABEL_SCAN_SECTORS in the source). Use with care.

--lockopt String
Used to pass options for special cases to lvmlockd. See lvmlockd(8) for more
information.

--longhelp
Display long help text.

--nohints
Do not use the hints file to locate devices for PVs. A command may read more
devices to find PVs when hints are not used. The command will still perform
standard hint file invalidation where appropriate.

--nolocking
Disable locking. Use with caution, concurrent commands may produce incorrect
results.

--profile String
An alias for --commandprofile or --metadataprofile, depending on the command.

--[pv]metadatacopies 0|1|2
The number of metadata areas to set aside on a PV for storing VG metadata. When 2,
one copy of the VG metadata is stored at the front of the PV and a second copy is
stored at the end. When 1, one copy of the VG metadata is stored at the front of
the PV. When 0, no copies of the VG metadata are stored on the given PV. This may
be useful in VGs containing many PVs (this places limitations on the ability to use
vgsplit later.)

-q|--quiet ...
Suppress output and log messages. Overrides --debug and --verbose. Repeat once to
also suppress any prompts with answer 'no'.

--repair
Repair headers and metadata on a PV.

--repairtype pv_header|metadata|label_header
Repair headers and metadata on a PV. See command description.

--settings String
Specifies command specific settings in "Key = Value" form. Combine multiple
settings in quotes, or repeat the settings option for each.

-t|--test
Run in test mode. Commands will not update metadata. This is implemented by
disabling all metadata writing but nevertheless returning success to the calling
function. This may lead to unusual error messages in multi-stage operations if a
tool relies on reading back metadata it believes has changed but hasn't.

-v|--verbose ...
Set verbose level. Repeat from 1 to 4 times to increase the detail of messages sent
to stdout and stderr.

--version
Display version information.

-y|--yes
Do not prompt for confirmation interactively but always assume the answer yes. Use
with extreme caution. (For automatic no, see -qq.)

VARIABLES

       PV     Physical  Volume  name,  a  device path under /dev.  For commands managing physical
              extents, a PV positional arg generally accepts a  suffix  indicating  a  range  (or
              multiple  ranges)  of  physical  extents  (PEs).  When  the first PE is omitted, it
              defaults to the start of the device, and when the last PE is omitted it defaults to
              end.   Start  and  end  range  (inclusive):  PV[:PE-PE]...   Start and length range
              (counting from 0): PV[:PE+PE]...

       String See the option description for information about the string content.

       Size[UNIT]
              Size is an input number that accepts an optional  unit.   Input  units  are  always
              treated  as  base  two  values, regardless of capitalization, e.g. 'k' and 'K' both
              refer to 1024.  The default input unit is specified by letter, followed  by  |UNIT.
              UNIT  represents  other  possible  input units: b|B is bytes, s|S is sectors of 512
              bytes, k|K is KiB, m|M is MiB, g|G is GiB, t|T is TiB, p|P  is  PiB,  e|E  is  EiB.
              (This should not be confused with the output control --units, where capital letters
              mean multiple of 1000.)

ENVIRONMENT VARIABLES

       See lvm(8) for  information  about  environment  variables  used  by  lvm.   For  example,
       LVM_VG_NAME can generally be substituted for a required VG parameter.

EXAMPLES

       If  the partition table is corrupted or lost on /dev/sda, and you suspect there was an LVM
       partition at approximately 100 MiB, then this area of the disk can be  scanned  using  the
       --labelsector parameter with a value of 204800 (100 * 1024 * 1024 / 512 = 204800).
       pvck --labelsector 204800 /dev/sda