Ubuntu Manpage: nbdkit-ssh-plugin - access disk images over the SSH protocol

Provided by: nbdkit_1.40.4-5ubuntu1_amd64

NAME

       nbdkit-ssh-plugin - access disk images over the SSH protocol

SYNOPSIS

        nbdkit ssh host=HOST [path=]PATH
                   [compression=true] [config=CONFIG_FILE]
                   [create=true] [create-mode=MODE] [create-size=SIZE]
                   [identity=FILENAME] [known-hosts=FILENAME]
                   [password=PASSWORD|-|+FILENAME]
                   [port=PORT] [timeout=SECS] [user=USER]
                   [verify-remote-host=false]

DESCRIPTION

       This is an nbdkit(1) plugin which lets you access remote disk images over Secure Shell
       (SSH).  Any server which hosts disk images and runs an SSH server can be turned into an
       NBD source using this plugin.

EXAMPLES

       nbdkit ssh host=ssh.example.com disk.img
           Open a file called disk.img on remote host "ssh.example.com".  Because the pathname is
           relative, it is opened relative to the user’s home directory on the remote server.

           The remote file can be read or written.  To force read-only access add the -r flag.

       nbdkit ssh host=ssh.example.com disk.img user=bob
           As above but log in using username "bob" (instead of trying the local username).

PARAMETERS

compression=true
Enable compression. You should only use this on slow or bandwidth-limited
connections. On fast connections it will slow things down.

config=CONFIG_FILE
Read local SSH configuration from an alternate configuration file. Libssh expands
some "%"-sequences in "CONFIG_FILE", see "Path expansion" below. "CONFIG_FILE" must
expand to an absolute path.

config=
Do not read any local SSH configuration.

The "config" parameter is optional. If it is not specified at all then ~/.ssh/config
and /etc/ssh/ssh_config are both read. Missing or unreadable files are ignored.

create=true
(nbdkit ≥ 1.32)

If set, the remote file will be created. The remote file is created on the first NBD
connection to nbdkit, not when nbdkit starts up. If the file already exists, it will
be replaced and any existing content lost.

If using this option, you must use "create-size". "create-mode" can be used to
control the permissions of the new file.

create-mode=MODE
(nbdkit ≥ 1.32)

If using "create=true" specify the default permissions of the new remote file. You
can use octal modes like "create-mode=0777" or "create-mode=0644". The default is
0600, ie. only readable and writable by the remote user.

create-size=SIZE
(nbdkit ≥ 1.32)

If using "create=true", specify the virtual size of the new disk. "SIZE" can use
modifiers like "100M" etc.

host=HOST
Specify the name or IP address of the remote host.

This parameter is required.

identity=FILENAME
Prepend the private key (identity) "FILENAME" to the list of identity files used.
Libssh examines several identity files by default such as ~/.ssh/id_ed25519,
~/.ssh/id_ecdsa, ~/.ssh/id_rsa and ~/.ssh/id_dsa. Libssh expands some "%"-sequences
in "FILENAME", see "Path expansion" below. "FILENAME" must expand to an absolute
path.

You can give this parameter multiple times.

known-hosts=FILENAME
Set name of the file which records the identity of previously seen hosts. Libssh
expands some "%"-sequences in "FILENAME", see "Path expansion" below. "FILENAME" must
expand to an absolute path.

The default is to check ~/.ssh/known_hosts followed by /etc/ssh/ssh_known_hosts.

password=PASSWORD
Set the password to use when connecting to the remote server.

Note that passing this on the command line is not secure on shared machines.

password=-
Ask for the password (interactively) when nbdkit starts up.

password=+FILENAME
Read the password from the named file. This is a secure method to supply a password,
as long as you set the permissions on the file appropriately.

password=-FD
Read the password from file descriptor number "FD", inherited from the parent process
when nbdkit starts up. This is also a secure method to supply a password.

[path=]PATH
Specify the path to the remote file. This can be a relative path in which case it is
relative to the remote home directory.

This parameter is required.

"path=" is a magic config key and may be omitted in most cases. See "Magic
parameters" in nbdkit(1).

port=PORT
Specify the SSH protocol port name or number.

This parameter is optional. If not given then the default ssh port is used.

timeout=SECS
Set the SSH connection timeout in seconds.

user=USER
Specify the remote username.

This parameter is optional. If not given then the local username is used.

verify-remote-host=true
verify-remote-host=false
Set whether or not we verify the remote host is one we have previously seen, using a
local file such as ~/.ssh/known_hosts. The default is "true", meaning that we verify
the remote host’s identity has not changed.

Setting this to "false" is dangerous because it allows a Man-In-The-Middle (MITM)
attack to be conducted against you.

NOTES

Known hosts
The SSH server’s host key is checked at connection time, and must be present and correct
in the local "known hosts" file.

If you have never connected to the SSH server before then the connection will usually
fail. You can:

• connect to the server first using ssh(1) so you can manually accept the host key, or

• provide the host key in an alternate file which you specify using the "known-hosts"
option, or

• set verify-remote-host=false on the command line. This latter option is dangerous
because it allows a MITM attack to be conducted against you.

Supported authentication methods
This plugin supports only the following authentication methods: "none", "publickey" or
"password". In particular note that "keyboard-interactive" is not supported.

SSH agent
There is no means for nbdkit to ask for the public key passphrase when it is running as a
server. Therefore "publickey" authentication must be done in conjunction with
ssh-agent(1).

Path expansion
In the "config", "identity" and "known-hosts" options, libssh expands some "%"-sequences.

%d The user’s SSH directory, usually ~/.ssh

%u The local username.

%l The local hostname.

%h The remote hostname.

%r The remote username.

%p The SSH port number.

"%%"
In libssh > 0.9.0 this expands to a single "%" character. In earlier versions of
libssh there was no way to escape a "%" character.

DEBUG FLAGS

   -D ssh.log=[1..4]
       Set the libssh log level to increasing levels of verbosity.  Each level includes messages
       from the previous levels.  Currently the levels are:

       1   informational and warning messages

       2   SSH and SFTP protocol steps

       3   SSH and SFTP packets

       4   libssh functions

       Use level 2 to diagnose SSH protocol or server problems.  Levels 3 and 4 are extremely
       verbose and probably only useful if you are debugging libssh itself.

       If diagnosing SSH problems it is also useful to look at server-side logs, eg.
       /var/log/secure or "journalctl -u sshd"

FILES

       ~/.ssh/config
       /etc/ssh/ssh_config
           These are the default SSH config files which are read to get other options.  You can
           change this using the "config" option.

       ~/.ssh/id_dsa
       ~/.ssh/id_ecdsa
       ~/.ssh/id_ed25519
       ~/.ssh/id_rsa
           These are some of the default private key (identify) files used by libssh.  You can
           prepend more to the list using the "identity" option.

       ~/.ssh/known_hosts
       /etc/ssh/ssh_known_hosts
           These are the default SSH files recording the identity of previously seen hosts.  You
           can change this using the "known-hosts" option.

       $plugindir/nbdkit-ssh-plugin.so
           The plugin.

           Use "nbdkit --dump-config" to find the location of $plugindir.

VERSION

       "nbdkit-ssh-plugin" first appeared in nbdkit 1.12.

AUTHORS

       Richard W.M. Jones

       Parts derived from Pino Toscano’s qemu libssh driver.

COPYRIGHT

       Copyright Red Hat

LICENSE

       Redistribution and use in source and binary forms, with or without modification, are
       permitted provided that the following conditions are met:

       •   Redistributions of source code must retain the above copyright notice, this list of
           conditions and the following disclaimer.

       •   Redistributions in binary form must reproduce the above copyright notice, this list of
           conditions and the following disclaimer in the documentation and/or other materials
           provided with the distribution.

       •   Neither the name of Red Hat nor the names of its contributors may be used to endorse
           or promote products derived from this software without specific prior written
           permission.

       THIS SOFTWARE IS PROVIDED BY RED HAT AND CONTRIBUTORS ''AS IS'' AND ANY EXPRESS OR IMPLIED
       WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
       FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL RED HAT OR CONTRIBUTORS
       BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
       DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
       OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
       LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
       OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
       POSSIBILITY OF SUCH DAMAGE.