Provided by: nbdkit-plugin-dev_1.40.4-5ubuntu1_amd64 
NAME
nbdkit-plugin - how to write nbdkit plugins
SYNOPSIS
#define NBDKIT_API_VERSION 2
#include <nbdkit-plugin.h>
#define THREAD_MODEL NBDKIT_THREAD_MODEL_SERIALIZE_ALL_REQUESTS
static void *
myplugin_open (void)
{
/* create a handle ... */
return handle;
}
static struct nbdkit_plugin plugin = {
.name = "myplugin",
.open = myplugin_open,
.get_size = myplugin_get_size,
.pread = myplugin_pread,
.pwrite = myplugin_pwrite,
/* etc */
};
NBDKIT_REGISTER_PLUGIN(plugin)
Compile the plugin as a shared library:
gcc -fPIC -shared myplugin.c -o myplugin.so
and load it into nbdkit:
nbdkit [--args ...] ./myplugin.so [key=value ...]
When debugging, use the -fv options:
nbdkit -fv ./myplugin.so [key=value ...]
DESCRIPTION
An nbdkit plugin is a new source device which can be served using the Network Block Device
(NBD) protocol. This manual page describes how to create an nbdkit plugin in C.
To see example plugins: https://gitlab.com/nbdkit/nbdkit/tree/master/plugins
To write plugins in other languages, see: nbdkit-cc-plugin(3), nbdkit-golang-plugin(3),
nbdkit-lua-plugin(3), nbdkit-ocaml-plugin(3), nbdkit-perl-plugin(3),
nbdkit-python-plugin(3), nbdkit-rust-plugin(3), nbdkit-sh-plugin(3), nbdkit-tcl-plugin(3)
.
API and ABI guarantee for C plugins
Plugins written in C have an ABI guarantee: a plugin compiled against an older version of
nbdkit will still work correctly when loaded with a newer nbdkit. We also try (but cannot
guarantee) to support plugins compiled against a newer version of nbdkit when loaded with
an older nbdkit, although the plugin may have reduced functionality if it depends on
features only provided by newer nbdkit.
For plugins written in C, we also provide an API guarantee: a plugin written against an
older header will still compile unmodified with a newer nbdkit.
The API guarantee does not always apply to plugins written in other (non-C) languages
which may have to adapt to changes when recompiled against a newer nbdkit.
WRITING AN NBDKIT PLUGIN
"#define NBDKIT_API_VERSION 2"
Plugins must choose which API version they want to use, by defining NBDKIT_API_VERSION
before including "<nbdkit-plugin.h>" (or any other nbdkit header).
If omitted, the default version is 1 for backwards-compatibility with nbdkit v1.1.26 and
earlier; however, it is recommended that new plugins be written to the maximum version
(currently 2) as it enables more features and better interaction with nbdkit filters.
The rest of this document only covers the version 2 interface. A newer nbdkit will always
support plugins written in C which use any prior API version.
"#include <nbdkit-plugin.h>"
All plugins should start by including this header file (after optionally choosing an API
version).
"#define THREAD_MODEL ..."
All plugins must define a thread model. See "Threads" below for details. It is generally
safe to use:
#define THREAD_MODEL NBDKIT_THREAD_MODEL_SERIALIZE_ALL_REQUESTS
"struct nbdkit_plugin"
All plugins must define and register one "struct nbdkit_plugin", which contains the name
of the plugin and pointers to callback functions, and use the
NBDKIT_REGISTER_PLUGIN(plugin) macro:
static struct nbdkit_plugin plugin = {
.name = "myplugin",
.longname = "My Plugin",
.description = "This is my great plugin for nbdkit",
.open = myplugin_open,
.get_size = myplugin_get_size,
.pread = myplugin_pread,
.pwrite = myplugin_pwrite,
/* etc */
};
NBDKIT_REGISTER_PLUGIN(plugin)
The ".name" field is the name of the plugin.
The callbacks are described below (see "CALLBACKS"). Only ".name", ".open", ".get_size"
and ".pread" are required. All other callbacks can be omitted, although typical plugins
need to use more.
Callback lifecycle
Callbacks are called in the following order over the lifecycle of the plugin:
┌──────────────────┐
│ load │
└─────────┬────────┘
│ configuration phase starts ─┐
┌─────────┴────────┐ ┆
│ config │ config is called once per ┆
└─────────┬────────┘↺ key=value on the command line ┆
┌─────────┴────────┐ ┆
│ config_complete │ ┆
└─────────┬────────┘ ┆
┌─────────┴────────┐ ┆
│ thread_model │ ┆
└─────────┬────────┘ configuration phase ends ─┘
┌─────────┴────────┐
│ get_ready │
└─────────┬────────┘
│ nbdkit forks into the background
┌─────────┴────────┐
│ after_fork │
└─────────┬────────┘
│ nbdkit starts serving clients
│
┌──────────┴─────────────┬─ ─ ─ ─ ─ ─ ─ ─ ─
┌──────┴─────┐ client #1 │
│ preconnect │ │
└──────┬─────┘ │
┌──────┴─────┐ │
│list_exports│ │
└──────┬─────┘ │
┌──────┴─────┐ │
│ open │ │
└──────┬─────┘ │
┌──────┴─────┐ NBD option │
│ can_write │ negotiation │
└──────┬─────┘ │
┌──────┴─────┐ ┌──────┴─────┐ client #2
│ get_size │ │ preconnect │
└──────┬─────┘ └──────┬─────┘
┌──────┴─────┐ data
│ pread │ serving
└──────┬─────┘↺ ...
┌──────┴─────┐
│ pwrite │
└──────┬─────┘↺ ┌──────┴─────┐
┌──────┴─────┐ │ close │
│ close │ └────────────┘
└────────────┘
│ before nbdkit exits
│
┌─────────┴────────┐
│ cleanup │
└─────────┬────────┘
┌─────────┴────────┐
│ unload │
└──────────────────┘
Notes
"nbdkit --dump-plugin"
The order of calls when the user queries the plugin is slightly different: ".config"
is called once for each parameter. ".config_complete" is not called. ".thread_model"
is called after ".config".
".get_ready"
This is the last chance to do any global preparation that is needed to serve
connections. In particular, error messages here will be visible to the user, but they
might not be in ".after_fork" (see below).
Plugins should not create background threads here. Use ".after_fork" instead.
".after_fork"
".after_fork" is called after the server has forked into the background and changed
UID and directory. If a plugin needs to create background threads (or uses an
external library that creates threads) it should do so here, because background
threads are invalidated by fork.
Because the server may have forked into the background, error messages and failures
from ".after_fork" cannot be seen by the user unless they look through syslog. An
error in ".after_fork" can appear to the user as if nbdkit “just died”. So in almost
all cases it is better to use ".get_ready" instead of this callback, or to do as much
preparation work as possible in ".get_ready" and only start background threads here.
The server doesn't always fork (eg. if the -f flag is used), but even so this callback
will be called. If you want to find out if the server forked between ".get_ready" and
".after_fork" use getpid(2).
".preconnect" and ".open"
".preconnect" is called when a TCP connection has been made to the server. This
happens early, before NBD or TLS negotiation.
".open" is called when a new client has connected and finished the NBD handshake. TLS
negotiation (if used) has been completed successfully.
".can_write", ".get_size" and other option negotiation callbacks
These are called during option negotiation with the client, but before any data is
served. These callbacks may return different values across different ".open" calls,
but within a single connection, they are called at most once and cached by nbdkit for
that connection.
".pread", ".pwrite" and other data serving callbacks
After option negotiation has finished, these may be called to serve data. Depending
on the thread model chosen, they might be called in parallel from multiple threads.
The data serving callbacks include a flags argument; the results of the negotiation
callbacks influence whether particular flags will ever be passed to a data callback.
".cleanup" and ".unload"
The difference between these two methods is that ".cleanup" is called before any
filter has been removed from memory with dlclose(3). When ".unload" is called, nbdkit
is in the middle of calling dlclose(3). Most plugins do not need to worry about this
difference.
Flags
The following flags are defined by nbdkit, and used in various data serving callbacks as
follows:
"NBDKIT_FLAG_MAY_TRIM"
This flag is used by the ".zero" callback; there is no way to disable this flag,
although a plugin that does not support trims as a way to write zeroes may ignore the
flag without violating expected semantics.
"NBDKIT_FLAG_FUA"
This flag represents Forced Unit Access semantics. It is used by the ".pwrite",
".zero", and ".trim" callbacks to indicate that the plugin must not return a result
until the action has landed in persistent storage. This flag will not be sent to the
plugin unless ".can_fua" is provided and returns "NBDKIT_FUA_NATIVE".
The following defines are valid as successful return values for ".can_fua":
"NBDKIT_FUA_NONE"
Forced Unit Access is not supported; the client must manually request a flush after
writes have completed. The "NBDKIT_FLAG_FUA" flag will not be passed to the plugin's
write callbacks.
"NBDKIT_FUA_EMULATE"
The client may request Forced Unit Access, but it is implemented by emulation, where
nbdkit calls ".flush" after a write operation; this is semantically correct, but may
hurt performance as it tends to flush more data than just what the client requested.
The "NBDKIT_FLAG_FUA" flag will not be passed to the plugin's write callbacks.
"NBDKIT_FUA_NATIVE"
The client may request Forced Unit Access, which results in the "NBDKIT_FLAG_FUA" flag
being passed to the plugin's write callbacks (".pwrite", ".trim", and ".zero"). When
the flag is set, these callbacks must not return success until the client's request
has landed in persistent storage.
The following defines are valid as successful return values for ".can_cache":
"NBDKIT_CACHE_NONE"
The server does not advertise caching support, and rejects any client-requested
caching. Any ".cache" callback is ignored.
"NBDKIT_CACHE_EMULATE"
The nbdkit server advertises cache support to the client, where the client may request
that the server cache a region of the export to potentially speed up future read
and/or write operations on that region. The nbdkit server implements the caching by
calling ".pread" and ignoring the results. This option exists to ease the
implementation of a common form of caching; any ".cache" callback is ignored.
"NBDKIT_CACHE_NATIVE"
The nbdkit server advertises cache support to the client, where the client may request
that the server cache a region of the export to potentially speed up future read
and/or write operations on that region. The nbdkit server calls the ".cache" callback
to perform the caching; if that callback is missing, the client's cache request
succeeds without doing anything.
Threads
Each nbdkit plugin must declare its maximum thread safety model by defining the
"THREAD_MODEL" macro. (This macro is used by "NBDKIT_REGISTER_PLUGIN"). Additionally, a
plugin may implement the ".thread_model" callback, called right after ".config_complete"
to make a runtime decision on which thread model to use. The nbdkit server chooses the
most restrictive model between the plugin's "THREAD_MODEL", the ".thread_model" if
present, any restrictions requested by filters, and any limitations imposed by the
operating system.
In "nbdkit --dump-plugin PLUGIN" output, the "max_thread_model" line matches the
"THREAD_MODEL" macro, and the "thread_model" line matches what the system finally settled
on after applying all restrictions.
The possible settings for "THREAD_MODEL" are defined below.
"#define THREAD_MODEL NBDKIT_THREAD_MODEL_SERIALIZE_CONNECTIONS"
Only a single handle can be open at any time, and all requests happen from one thread.
Note this means only one client can connect to the server at any time. If a second
client tries to connect it will block waiting for the first client to close the
connection.
"#define THREAD_MODEL NBDKIT_THREAD_MODEL_SERIALIZE_ALL_REQUESTS"
This is a safe default for most plugins.
Multiple handles can be open at the same time, but requests are serialized so that for
the plugin as a whole only one open/read/write/close (etc) request will be in progress
at any time.
This is a useful setting if the library you are using is not thread-safe. However
performance may not be good.
"#define THREAD_MODEL NBDKIT_THREAD_MODEL_SERIALIZE_REQUESTS"
Multiple handles can be open and multiple data requests can happen in parallel.
However only one request will happen per handle at a time (but requests on different
handles might happen concurrently).
"#define THREAD_MODEL NBDKIT_THREAD_MODEL_PARALLEL"
Multiple handles can be open and multiple data requests can happen in parallel (even
on the same handle). The server may reorder replies, answering a later request before
an earlier one.
All the libraries you use must be thread-safe and reentrant, and any code that creates
a file descriptor should atomically set "FD_CLOEXEC" if you do not want it
accidentally leaked to another thread's child process. You may also need to provide
mutexes for fields in your connection handle.
If none of the above thread models are suitable, use "NBDKIT_THREAD_MODEL_PARALLEL" and
implement your own locking using "pthread_mutex_t" etc.
Error handling
If there is an error in the plugin, the plugin should call nbdkit_error(3) to report an
error message. Then, the callback should return the appropriate error indication, eg.
"NULL" or -1.
More information about these functions and nbdkit_verror(3) can be found in the separate
manual page about them.
CALLBACKS
".name"
const char *name;
This field (a string) is required, and must contain only ASCII alphanumeric characters or
non-leading dashes, and be unique amongst all plugins.
".version"
const char *version;
Plugins may optionally set a version string which is displayed in help and debugging
output. (See also "VERSION" below)
".longname"
const char *longname;
An optional free text name of the plugin. This field is used in error messages.
".description"
const char *description;
An optional multi-line description of the plugin.
".load"
void load (void);
This is called once just after the plugin is loaded into memory. You can use this to
perform any global initialization needed by the plugin.
".unload"
void unload (void);
This may be called once just before the plugin is unloaded from memory. Note that it's
not guaranteed that ".unload" will always be called (eg. the server might be killed or
segfault), so you should try to make the plugin as robust as possible by not requiring
cleanup. See also "SHUTDOWN" below.
".dump_plugin"
void dump_plugin (void);
This optional callback is called when the "nbdkit plugin --dump-plugin" command is used.
It should print any additional informative "key=value" fields to stdout as needed.
Prefixing the keys with the name of the plugin will avoid conflicts.
".config"
int config (const char *key, const char *value);
On the nbdkit command line, after the plugin filename, come an optional list of
"key=value" arguments. These are passed to the plugin through this callback when the
plugin is first loaded and before any connections are accepted.
This callback may be called zero or more times.
Both "key" and "value" parameters will be non-NULL. The strings are owned by nbdkit but
will remain valid for the lifetime of the plugin, so the plugin does not need to copy
them.
The key will be a non-empty string beginning with an ASCII alphabetic character ("A-Z"
"a-z"). The rest of the key must contain only ASCII alphanumeric plus period, underscore
or dash characters ("A-Z" "a-z" "0-9" "." "_" "-"). The value may be an arbitrary string,
including an empty string.
The names of "key"s accepted by plugins is up to the plugin, but you should probably look
at other plugins and follow the same conventions.
If the value is a relative path, then note that the server changes directory when it
starts up. See nbdkit_realpath(3).
If nbdkit_stdio_safe(3) returns 1, the value of the configuration parameter may be used to
trigger reading additional data through stdin (such as a password or inline script).
If the ".config" callback is not provided by the plugin, and the user tries to specify any
"key=value" arguments, then nbdkit will exit with an error.
If there is an error, ".config" should call nbdkit_error(3) with an error message and
return -1.
".magic_config_key"
const char *magic_config_key;
This optional string can be used to set a "magic" key used when parsing plugin parameters.
It affects how "bare parameters" (those which do not contain an "=" character) are parsed
on the command line.
If "magic_config_key != NULL" then any bare parameters are passed to the ".config" method
as: "config (magic_config_key, argv[i]);".
If "magic_config_key" is not set then we behave as in nbdkit < 1.7: If the first parameter
on the command line is bare then it is passed to the ".config" method as:
"config ("script", value);". Any other bare parameters give errors.
".config_complete"
int config_complete (void);
This optional callback is called after all the configuration has been passed to the
plugin. It is a good place to do checks, for example that the user has passed the
required parameters to the plugin.
If there is an error, ".config_complete" should call nbdkit_error(3) with an error message
and return -1.
".config_help"
const char *config_help;
This optional multi-line help message should summarize any "key=value" parameters that it
takes. It does not need to repeat what already appears in ".description".
If the plugin doesn't take any config parameters you should probably omit this.
".thread_model"
int thread_model (void)
This optional callback is called after all the configuration has been passed to the
plugin. It can be used to force a stricter thread model based on configuration, compared
to "THREAD_MODEL". See "Threads" above for details. Attempts to request a looser (more
parallel) model are silently ignored.
If there is an error, ".thread_model" should call nbdkit_error(3) with an error message
and return -1.
".get_ready"
int get_ready (void);
This optional callback is called before the server starts serving. It is called before
the server forks or changes directory. It is ordinarily the last chance to do any global
preparation that is needed to serve connections.
If there is an error, ".get_ready" should call nbdkit_error(3) with an error message and
return -1.
".after_fork"
int after_fork (void);
This optional callback is called before the server starts serving. It is called after the
server forks and changes directory. If a plugin needs to create background threads (or
uses an external library that creates threads) it should do so here, because background
threads are killed by fork. However you should try to do as little as possible here
because error reporting is difficult. See "Callback lifecycle" above.
If there is an error, ".after_fork" should call nbdkit_error(3) with an error message and
return -1.
".cleanup"
void cleanup (void);
This optional callback is called after the server has closed all connections and is
preparing to unload. It is only reached in the same cases that the ".after_fork" callback
was used, making it a good place to clean up any background threads. However, it is not
guaranteed that this callback will be reached, so you should try to make the plugin as
robust as possible by not requiring cleanup. See also "SHUTDOWN" below.
".preconnect"
int preconnect (int readonly);
This optional callback is called when a TCP connection has been made to the server. This
happens early, before NBD or TLS negotiation. If TLS authentication is required to access
the server, then it has not been negotiated at this point.
For security reasons (to avoid denial of service attacks) this callback should be written
to be as fast and take as few resources as possible. If you use this callback, only use
it to do basic access control, such as checking nbdkit_peer_name(3), nbdkit_peer_pid(3),
nbdkit_peer_uid(3), nbdkit_peer_gid(3) against a list of permitted source addresses (see
"PEER NAME" and nbdkit-ip-filter(1)). It may be better to do access control outside the
server, for example using TCP wrappers or a firewall.
The "readonly" flag informs the plugin that the server was started with the -r flag on the
command line.
Returning 0 will allow the connection to continue. If there is an error or you want to
deny the connection, call nbdkit_error(3) with an error message and return -1.
".list_exports"
int list_exports (int readonly, int is_tls,
struct nbdkit_exports *exports);
This optional callback is called if the client tries to list the exports served by the
plugin (using "NBD_OPT_LIST"). If the plugin does not supply this callback then the
result of ".default_export" is advertised as the lone export. The NBD protocol defines ""
as the default export, so this is suitable for plugins which ignore the export name and
always serve the same content. See also "EXPORT NAME" below.
The "readonly" flag informs the plugin that the server was started with the -r flag on the
command line, which is the same value passed to ".preconnect" and ".open". However, the
NBD protocol does not yet have a way to let the client advertise an intent to be read-only
even when the server allows writes, so this parameter may not be as useful as it appears.
The "is_tls" flag informs the plugin whether this listing was requested after the client
has completed TLS negotiation. When running the server in a mode that permits but does
not require TLS, be careful that any exports listed when "is_tls" is "false" do not leak
unintended information.
The "exports" parameter is an opaque object for collecting the list of exports. Call
"nbdkit_add_export" as needed to add specific exports to the list.
int nbdkit_add_export (struct nbdkit_export *exports,
const char *name, const char *description);
The "name" must be a non-NULL, UTF-8 string between 0 and 4096 bytes in length. Export
names must be unique. "description" is an optional description of the export which some
clients can display but which is otherwise unused (if you don't want a description, you
can pass this parameter as "NULL"). The string(s) are copied into the exports list so you
may free them immediately after calling this function. "nbdkit_add_export" returns 0 on
success or -1 on failure; on failure nbdkit_error(3) has already been called, with "errno"
set to a suitable value.
There are also situations where a plugin may wish to duplicate the nbdkit default behavior
of supplying an export list containing only the result of ".default_export" when
".list_exports" is missing; this is most common in a language binding where it is not
known at compile time whether the language script will be providing an implementation for
".list_exports", and is done by calling "nbdkit_use_default_export".
int nbdkit_use_default_export (struct nbdkit_export *exports);
"nbdkit_use_default_export" returns 0 on success or -1 on failure; on failure
nbdkit_error(3) has already been called, with "errno" set to a suitable value.
The plugin may also leave the export list empty, by not calling either helper. Once the
plugin is happy with the list contents, returning 0 will send the list of exports back to
the client. If there is an error, ".list_exports" should call nbdkit_error(3) with an
error message and return -1.
".default_export"
const char *default_export (int readonly, int is_tls);
This optional callback is called if the client tries to connect to the default export "",
where the plugin provides a UTF-8 string between 0 and 4096 bytes. If the plugin does not
supply this callback, the connection continues with the empty name; if the plugin returns
a valid string, nbdkit behaves as if the client had passed that string instead of an empty
name, and returns that name to clients that support it (see the "NBD_INFO_NAME" response
to "NBD_OPT_GO"). Similarly, if the plugin does not supply a ".list_exports" callback,
the result of this callback determines what export name to advertise to a client
requesting an export list.
The "readonly" flag informs the plugin that the server was started with the -r flag on the
command line, which is the same value passed to ".preconnect" and ".open". However, the
NBD protocol does not yet have a way to let the client advertise an intent to be read-only
even when the server allows writes, so this parameter may not be as useful as it appears.
The "is_tls" flag informs the plugin whether the canonical name for the default export is
being requested after the client has completed TLS negotiation. When running the server
in a mode that permits but does not require TLS, be careful that a default export name
does not leak unintended information.
If the plugin returns "NULL" or an invalid string (such as longer than 4096 bytes), the
client is not permitted to connect to the default export. However, this is not an error
in the protocol, so it is not necessary to call nbdkit_error(3).
".open"
void *open (int readonly);
This is called when a new client connects to the nbdkit server. The callback should
allocate a handle and return it. This handle is passed back to other callbacks and could
be freed in the ".close" callback.
Note that the handle is completely opaque to nbdkit, but it must not be NULL. If you
don't need to use a handle, return "NBDKIT_HANDLE_NOT_NEEDED" which is a static non-NULL
pointer.
The "readonly" flag informs the plugin that the server was started with the -r flag on the
command line which forces connections to be read-only. Note that the plugin may
additionally force the connection to be readonly (even if this flag is false) by returning
false from the ".can_write" callback. So if your plugin can only serve read-only, you can
ignore this parameter.
If the plugin wants to differentiate the content it serves based on client input, then
this is the spot to use nbdkit_export_name(3) to determine which export the client
requested. See also "EXPORT NAME AND TLS" below.
This callback is called after the NBD handshake has completed; if the server requires TLS
authentication, then that has occurred as well. But if the server is set up to have
optional TLS authentication, you may check nbdkit_is_tls(3) to learn whether the client
has completed TLS authentication. When running the server in a mode that permits but does
not require TLS, be careful that you do not allow unauthenticated clients to cause a
denial of service against authentication.
If there is an error, ".open" should call nbdkit_error(3) with an error message and return
"NULL".
".close"
void close (void *handle);
This is called when the client closes the connection. It should clean up any per-
connection resources.
Note there is no way in the NBD protocol to communicate close errors back to the client,
for example if your plugin calls close(2) and you are checking for errors (as you should
do). Therefore the best you can do is to log the error on the server. Well-behaved NBD
clients should try to flush the connection before it is closed and check for errors, but
obviously this is outside the scope of nbdkit.
".get_size"
int64_t get_size (void *handle);
This is called during the option negotiation phase of the protocol to get the size (in
bytes) of the block device being exported.
The returned size must be ≥ 0. If there is an error, ".get_size" should call
nbdkit_error(3) with an error message and return -1.
".export_description"
const char *export_description (void *handle);
This is called during the option negotiation phase only if the client specifically
requested an export description (see the "NBD_INFO_DESCRIPTION" response to "NBD_OPT_GO").
Any description provided must be human-readable UTF-8, no longer than 4096 bytes.
Ideally, this description should match any description set during ".list_exports", but
that is not enforced.
If the plugin returns "NULL" or an invalid string (such as longer than 4096 bytes), or if
this callback is omitted, no description is offered to the client. As this is not an
error in the protocol, it is not necessary to call nbdkit_error(3). If the callback will
not be returning a compile-time constant string, you may find nbdkit_strdup_intern(3)
helpful for returning a value that avoids a memory leak.
".block_size"
int block_size (void *handle, uint32_t *minimum,
uint32_t *preferred, uint32_t *maximum);
This is called during the option negotiation phase of the protocol to get the minimum,
preferred and maximum block size (all in bytes) of the block device. The client should
obey these constraints by not making requests which are smaller than the minimum size or
larger than the maximum size, and usually making requests of a multiple of the preferred
size. Furthermore requests should be aligned to at least the minimum block size, and
usually the preferred block size.
"Preferred" block size in the NBD specification can be misinterpreted. It means the I/O
size which does not have a penalty for read-modify-write.
Even if the plugin implements this callback, this does not mean that all client requests
will obey the constraints. A client could still ignore the constraints. nbdkit passes
all requests through to the plugin, because what the plugin does depends on the plugin's
policy. It might decide to serve the requests correctly anyway, or reject them with an
error. Plugins can avoid this complexity by using nbdkit-blocksize-policy-filter(1) which
allows both setting/adjusting the constraints, and selecting an error policy.
The minimum block size must be ≥ 1. The maximum block size must be ≤ 0xffff_ffff.
minimum ≤ preferred ≤ maximum.
As a special case, the plugin may return minimum == preferred == maximum == 0, meaning no
information.
If this callback is not used, then the NBD protocol assumes by default minimum = 1,
preferred = 4096. (Maximum block size depends on various factors, see the NBD protocol
specification, section "Block size constraints").
".can_write"
int can_write (void *handle);
This is called during the option negotiation phase to find out if the handle supports
writes.
If there is an error, ".can_write" should call nbdkit_error(3) with an error message and
return -1.
This callback is not required. If omitted, then we return true iff a ".pwrite" callback
has been defined.
".can_flush"
int can_flush (void *handle);
This is called during the option negotiation phase to find out if the handle supports the
flush-to-disk operation.
If there is an error, ".can_flush" should call nbdkit_error(3) with an error message and
return -1.
This callback is not required. If omitted, then we return true iff a ".flush" callback
has been defined.
".is_rotational"
int is_rotational (void *handle);
This is called during the option negotiation phase to find out if the backing disk is a
rotational medium (like a traditional hard disk) or not (like an SSD). If true, this may
cause the client to reorder requests to make them more efficient for a slow rotating disk.
If there is an error, ".is_rotational" should call nbdkit_error(3) with an error message
and return -1.
This callback is not required. If omitted, then we return false.
".can_trim"
int can_trim (void *handle);
This is called during the option negotiation phase to find out if the plugin supports the
trim/discard operation for punching holes in the backing storage.
If there is an error, ".can_trim" should call nbdkit_error(3) with an error message and
return -1.
This callback is not required. If omitted, then we return true iff a ".trim" callback has
been defined.
".can_zero"
int can_zero (void *handle);
This is called during the option negotiation phase to find out if the plugin wants the
".zero" callback to be utilized. Support for writing zeroes is still advertised to the
client (unless the nbdkit-nozero-filter(1) is also used), so returning false merely serves
as a way to avoid complicating the ".zero" callback to have to fail with "ENOTSUP" or
"EOPNOTSUPP" on the connections where it will never be more efficient than using ".pwrite"
up front.
If there is an error, ".can_zero" should call nbdkit_error(3) with an error message and
return -1.
This callback is not required. If omitted, then for a normal zero request, nbdkit always
tries ".zero" first if it is present, and gracefully falls back to ".pwrite" if ".zero"
was absent or failed with "ENOTSUP" or "EOPNOTSUPP".
".can_fast_zero"
int can_fast_zero (void *handle);
This is called during the option negotiation phase to find out if the plugin wants to
advertise support for fast zero requests. If this support is not advertised, a client
cannot attempt fast zero requests, and has no way to tell if writing zeroes offers any
speedups compared to using ".pwrite" (other than compressed network traffic). If support
is advertised, then ".zero" will have "NBDKIT_FLAG_FAST_ZERO" set when the client has
requested a fast zero, in which case the plugin must fail with "ENOTSUP" or "EOPNOTSUPP"
up front if the request would not offer any benefits over ".pwrite". Advertising support
for fast zero requests does not require that writing zeroes be fast, only that the result
(whether success or failure) is fast, so this should be advertised when feasible.
If there is an error, ".can_fast_zero" should call nbdkit_error(3) with an error message
and return -1.
This callback is not required. If omitted, then nbdkit returns true if ".zero" is absent
or ".can_zero" returns false (in those cases, nbdkit fails all fast zero requests, as its
fallback to ".pwrite" is not inherently faster), otherwise false (since it cannot be
determined in advance if the plugin's ".zero" will properly honor the semantics of
"NBDKIT_FLAG_FAST_ZERO").
".can_extents"
int can_extents (void *handle);
This is called during the option negotiation phase to find out if the plugin supports
detecting allocated (non-sparse) regions of the disk with the ".extents" callback.
If there is an error, ".can_extents" should call nbdkit_error(3) with an error message and
return -1.
This callback is not required. If omitted, then we return true iff a ".extents" callback
has been defined.
".can_fua"
int can_fua (void *handle);
This is called during the option negotiation phase to find out if the plugin supports the
Forced Unit Access (FUA) flag on write, zero, and trim requests. If this returns
"NBDKIT_FUA_NONE", FUA support is not advertised to the client; if this returns
"NBDKIT_FUA_EMULATE", the ".flush" callback must work (even if ".can_flush" returns
false), and FUA support is emulated by calling ".flush" after any write operation; if this
returns "NBDKIT_FUA_NATIVE", then the ".pwrite", ".zero", and ".trim" callbacks (if
implemented) must handle the flag "NBDKIT_FLAG_FUA", by not returning until that action
has landed in persistent storage.
If there is an error, ".can_fua" should call nbdkit_error(3) with an error message and
return -1.
This callback is not required unless a plugin wants to specifically handle FUA requests.
If omitted, nbdkit checks whether ".flush" exists, and behaves as if this function returns
"NBDKIT_FUA_NONE" or "NBDKIT_FUA_EMULATE" as appropriate.
".can_multi_conn"
int can_multi_conn (void *handle);
This is called during the option negotiation phase to find out if the plugin is prepared
to handle multiple connections from a single client. If the plugin sets this to true then
a client may try to open multiple connections to the nbdkit server and spread requests
across all connections to maximize parallelism. If the plugin sets it to false (which is
the default) then well-behaved clients should only open a single connection, although we
cannot control what clients do in practice.
Specifically it means that either the plugin does not cache requests at all. Or if it
does cache them then the effects of a ".flush" request or setting "NBDKIT_FLAG_FUA" on a
request must be visible across all connections to the plugin before the plugin replies to
that request.
Properly working clients should send the same export name for each of these connections.
If you use Linux nbd-client(8) option -C num with num > 1 then Linux checks this flag and
will refuse to connect if ".can_multi_conn" is false.
If there is an error, ".can_multi_conn" should call nbdkit_error(3) with an error message
and return -1.
This callback is not required. If omitted, then we return false.
".can_cache"
int can_cache (void *handle);
This is called during the option negotiation phase to find out if the plugin supports a
cache or prefetch operation.
This can return:
"NBDKIT_CACHE_NONE"
Cache support is not advertised to the client.
"NBDKIT_CACHE_EMULATE"
Caching is emulated by the server calling ".pread" and discarding the result.
"NBDKIT_CACHE_NATIVE"
Cache support is advertised to the client. The ".cache" callback will be called if it
exists, otherwise all cache requests instantly succeed.
If there is an error, ".can_cache" should call nbdkit_error(3) with an error message and
return -1.
This callback is not required. If omitted, then we return "NBDKIT_CACHE_NONE" if the
".cache" callback is missing, or "NBDKIT_CACHE_NATIVE" if it is defined.
".pread"
int pread (void *handle, void *buf, uint32_t count, uint64_t offset,
uint32_t flags);
During the data serving phase, nbdkit calls this callback to read data from the backing
store. "count" bytes starting at "offset" in the backing store should be read and copied
into "buf". nbdkit takes care of all bounds- and sanity-checking, so the plugin does not
need to worry about that.
The parameter "flags" exists in case of future NBD protocol extensions; at this time, it
will be 0 on input.
The callback must read the whole "count" bytes if it can. The NBD protocol doesn't allow
partial reads (instead, these would be errors). If the whole "count" bytes was read, the
callback should return 0 to indicate there was no error.
If there is an error (including a short read which couldn't be recovered from), ".pread"
should call nbdkit_error(3) with an error message, and nbdkit_set_error(3) to record an
appropriate error (unless "errno" is sufficient), then return -1.
".pwrite"
int pwrite (void *handle, const void *buf, uint32_t count, uint64_t offset,
uint32_t flags);
During the data serving phase, nbdkit calls this callback to write data to the backing
store. "count" bytes starting at "offset" in the backing store should be written using
the data in "buf". nbdkit takes care of all bounds- and sanity-checking, so the plugin
does not need to worry about that.
This function will not be called if ".can_write" returned false. The parameter "flags"
may include "NBDKIT_FLAG_FUA" on input based on the result of ".can_fua".
The callback must write the whole "count" bytes if it can. The NBD protocol doesn't allow
partial writes (instead, these would be errors). If the whole "count" bytes was written
successfully, the callback should return 0 to indicate there was no error.
If there is an error (including a short write which couldn't be recovered from), ".pwrite"
should call nbdkit_error(3) with an error message, and nbdkit_set_error(3) to record an
appropriate error (unless "errno" is sufficient), then return -1.
".flush"
int flush (void *handle, uint32_t flags);
During the data serving phase, this callback is used to fdatasync(2) the backing store,
ie. to ensure it has been completely written to a permanent medium. If that is not
possible then you can omit this callback.
This function will not be called directly by the client if ".can_flush" returned false;
however, it may still be called by nbdkit if ".can_fua" returned "NBDKIT_FUA_EMULATE".
The parameter "flags" exists in case of future NBD protocol extensions; at this time, it
will be 0 on input.
If there is an error, ".flush" should call nbdkit_error(3) with an error message, and
nbdkit_set_error(3) to record an appropriate error (unless "errno" is sufficient), then
return -1.
".trim"
int trim (void *handle, uint32_t count, uint64_t offset, uint32_t flags);
During the data serving phase, this callback is used to "punch holes" in the backing
store. If that is not possible then you can omit this callback.
This function will not be called if ".can_trim" returned false. The parameter "flags" may
include "NBDKIT_FLAG_FUA" on input based on the result of ".can_fua".
If there is an error, ".trim" should call nbdkit_error(3) with an error message, and
nbdkit_set_error(3) to record an appropriate error (unless "errno" is sufficient), then
return -1.
".zero"
int zero (void *handle, uint32_t count, uint64_t offset, uint32_t flags);
During the data serving phase, this callback is used to write "count" bytes of zeroes at
"offset" in the backing store.
This function will not be called if ".can_zero" returned false. On input, the parameter
"flags" may include "NBDKIT_FLAG_MAY_TRIM" unconditionally, "NBDKIT_FLAG_FUA" based on the
result of ".can_fua", and "NBDKIT_FLAG_FAST_ZERO" based on the result of ".can_fast_zero".
If "NBDKIT_FLAG_MAY_TRIM" is requested, the operation can punch a hole instead of writing
actual zero bytes, but only if subsequent reads from the hole read as zeroes.
If "NBDKIT_FLAG_FAST_ZERO" is requested, the plugin must decide up front if the
implementation is likely to be faster than a corresponding ".pwrite"; if not, then it must
immediately fail with "ENOTSUP" or "EOPNOTSUPP" (whether by nbdkit_set_error(3) or
"errno") and preferably without modifying the exported image. It is acceptable to always
fail a fast zero request (as a fast failure is better than attempting the write only to
find out after the fact that it was not fast after all). Note that on Linux, support for
ioctl(BLKZEROOUT) is insufficient for determining whether a zero request to a block device
will be fast (because the kernel will perform a slow fallback when needed).
The callback must write the whole "count" bytes if it can. The NBD protocol doesn't allow
partial writes (instead, these would be errors). If the whole "count" bytes was written
successfully, the callback should return 0 to indicate there was no error.
If there is an error, ".zero" should call nbdkit_error(3) with an error message, and
nbdkit_set_error(3) to record an appropriate error (unless "errno" is sufficient), then
return -1.
If this callback is omitted, or if it fails with "ENOTSUP" or "EOPNOTSUPP" (whether by
nbdkit_set_error(3) or "errno"), then ".pwrite" will be used as an automatic fallback
except when the client requested a fast zero.
".extents"
int extents (void *handle, uint32_t count, uint64_t offset,
uint32_t flags, struct nbdkit_extents *extents);
During the data serving phase, this callback is used to detect allocated, sparse and
zeroed regions of the disk.
This function will not be called if ".can_extents" returned false. nbdkit's default
behaviour in this case is to treat the whole virtual disk as if it was allocated. Also,
this function will not be called by a client that does not request structured replies (the
--no-sr option of nbdkit can be used to test behavior when ".extents" is unavailable to
the client).
The callback should detect and return the list of extents overlapping the range
"[offset...offset+count-1]". The "extents" parameter points to an opaque object which the
callback should fill in by calling "nbdkit_add_extent". See "Extents list" below.
If there is an error, ".extents" should call nbdkit_error(3) with an error message, and
nbdkit_set_error(3) to record an appropriate error (unless "errno" is sufficient), then
return -1.
Extents list
The plugin "extents" callback is passed an opaque pointer "struct nbdkit_extents
*extents". This structure represents a list of filesystem extents describing which areas
of the disk are allocated, which are sparse (“holes”), and, if supported, which are
zeroes.
The "extents" callback should scan the disk starting at "offset" and call
"nbdkit_add_extent" for each extent found.
Extents overlapping the range "[offset...offset+count-1]" should be returned if possible.
However nbdkit ignores extents < offset so the plugin may, if it is easier to implement,
return all extent information for the whole disk. The plugin may return extents beyond
the end of the range. It may also return extent information for less than the whole
range, but it must return at least one extent overlapping "offset".
The extents must be added in ascending order, and must be contiguous.
The "flags" parameter of the ".extents" callback may contain the flag
"NBDKIT_FLAG_REQ_ONE". This means that the client is only requesting information about
the extent overlapping "offset". The plugin may ignore this flag, or as an optimization
it may return just a single extent for "offset".
int nbdkit_add_extent (struct nbdkit_extents *extents,
uint64_t offset, uint64_t length, uint32_t type);
Add an extent covering "[offset...offset+length-1]" of one of the following four types:
"type = 0"
A normal, allocated data extent.
"type = NBDKIT_EXTENT_HOLE|NBDKIT_EXTENT_ZERO"
An unallocated extent, a.k.a. a “hole”, which reads back as zeroes. This is the
normal type of hole applicable to most disks.
"type = NBDKIT_EXTENT_ZERO"
An allocated extent which is known to contain only zeroes.
"type = NBDKIT_EXTENT_HOLE"
An unallocated extent (hole) which does not read back as zeroes. Note this should
only be used in specialized circumstances such as when writing a plugin for (or to
emulate) certain SCSI drives which do not guarantee that trimmed blocks read back as
zeroes.
"nbdkit_add_extent" returns 0 on success or -1 on failure. On failure nbdkit_error(3)
and/or nbdkit_set_error(3) has already been called. "errno" will be set to a suitable
value.
".cache"
int cache (void *handle, uint32_t count, uint64_t offset, uint32_t flags);
During the data serving phase, this callback is used to give the plugin a hint that the
client intends to make further accesses to the given region of the export.
The nature of caching/prefetching is not specified further by the NBD specification. For
example, a server may place limits on how much may be cached at once, and there is no way
to control if writes to a cached area have write-through or write-back semantics. In
fact, the cache command can always fail and still be compliant, and success might not
guarantee a performance gain.
If this callback is omitted, then the results of ".can_cache" determine whether nbdkit
will reject cache requests, treat them as instant success, or emulate caching by calling
".pread" over the same region and ignoring the results.
This function will not be called if ".can_cache" did not return "NBDKIT_CACHE_NATIVE".
The "flags" parameter exists in case of future NBD protocol extensions; at this time, it
will be 0 on input. A plugin must fail this function if "flags" includes an unrecognized
flag, as that may indicate a requirement that the plugin must comply with to provide a
specific caching semantic.
If there is an error, ".cache" should call nbdkit_error(3) with an error message, and
nbdkit_set_error(3) to record an appropriate error (unless "errno" is sufficient), then
return -1.
".errno_is_preserved"
This field defaults to 0; if non-zero, nbdkit can reliably use the value of "errno" when a
callback reports failure, rather than the plugin having to call nbdkit_set_error(3).
UMASK
All plugins will see a umask(2) of 0022.
PARSING COMMAND LINE PARAMETERS
nbdkit provides several functions to help plugins and filters to parse command line
parameters. These are documented in separate man pages:
Parse disk sizes (eg. "size=100M")
nbdkit_parse_size(3)
Parse numbers
nbdkit_parse_int(3) nbdkit_parse_unsigned(3) nbdkit_parse_int8_t(3)
nbdkit_parse_uint8_t(3) nbdkit_parse_int16_t(3) nbdkit_parse_uint16_t(3)
nbdkit_parse_int32_t(3) nbdkit_parse_uint32_t(3) nbdkit_parse_int64_t(3)
nbdkit_parse_uint64_t(3)
Parse booleans (eg. "setting=true")
nbdkit_parse_bool(3)
Parse probabilities (eg. "rate=50%")
nbdkit_parse_probability(3)
Parse delays and sleeps (eg. "delay=33ms")
nbdkit_parse_delay(3)
Reading passwords and other secrets
nbdkit_read_password(3)
Safely interacting with stdin and stdout
nbdkit_stdio_safe(3)
Filenames and paths
nbdkit_absolute_path(3) nbdkit_realpath(3)
SLEEPING
A plugin or filter that needs to sleep may call sleep(2), nanosleep(2) and similar.
However that can cause nbdkit to delay excessively when shutting down (since it must wait
for any plugin or filter which is sleeping). To avoid this plugins and filters should
call nbdkit_nanosleep(3) instead.
EXPORT NAME AND TLS
If the client negotiated an NBD export name with nbdkit then plugins may read this from
any connected callback. Nbdkit's normal behaviour is to accept any export name passed by
the client, log it in debug output, but otherwise ignore it. By calling
nbdkit_export_name(3) plugins may choose to filter by export name or serve different
content.
nbdkit_is_tls(3) can be used to find the status of TLS negotiation on the current
connection.
STRING LIFETIME
Some callbacks are specified to return "const char *", even when a plugin may not have a
suitable compile-time constant to return. Returning dynamically-allocated memory for such
a callback would induce a memory leak or otherwise complicate the plugin to perform
additional bookkeeping. For these cases, nbdkit provides several convenience functions
for creating a copy of a string for better lifetime management:
nbdkit_strdup_intern(3), nbdkit_strndup_intern(3), nbdkit_printf_intern(3),
nbdkit_vprintf_intern(3).
PEER NAME
In any connected callback you can get the source address of the client using
nbdkit_peer_name(3). If the client is connected over a Unix domain socket, you may also
be able to get the client process ID, user ID, group ID and security context using:
nbdkit_peer_pid(3), nbdkit_peer_uid(3), nbdkit_peer_gid(3) and
nbdkit_peer_security_context(3). If the client is connected using TLS and presented a
client certificate then the Distinguished Name (DN) may be read using
nbdkit_peer_tls_dn(3) and the issuer's DN by nbdkit_peer_tls_issuer_dn(3).
SHUTDOWN
When nbdkit receives certain signals it will shut down (see "SIGNALS" in nbdkit(1)). The
server will wait for any currently running plugin callbacks to finish, call ".close" on
those connections, then call the ".cleanup" and ".unload" callbacks before unloading the
plugin.
Note that it's not guaranteed this can always happen (eg. the server might be killed by
"SIGKILL" or segfault).
See nbdkit_shutdown(3) and nbdkit_disconnect(3) for how to request server shutdown or
client disconnection from within plugins.
VERSION
Compile-time version of nbdkit
The macros "NBDKIT_VERSION_MAJOR", "NBDKIT_VERSION_MINOR" and "NBDKIT_VERSION_MICRO"
expand to integers containing the version of the nbdkit headers that you are compiling
against.
"NBDKIT_VERSION_MAJOR" is always 1. "NBDKIT_VERSION_MINOR" is even for stable releases of
nbdkit and odd for development releases.
The macro "NBDKIT_VERSION_STRING" expands to the same version as a string.
Run-time version of nbdkit
When the plugin is loaded into nbdkit, it may not be the same version that it was compiled
against. nbdkit guarantees backwards compatibility of the API and ABI, so provided that
nbdkit is the same version or newer, the plugin will still work. There is no way to get
the version of nbdkit from the plugin.
Version of the plugin
The plugin itself can use any versioning scheme you want, and put any string into the
".version" field of the plugin struct (or leave the field NULL).
API version
See "WRITING AN NBDKIT PLUGIN" above.
DEBUGGING
Run the server with -f and -v options so it doesn't fork and you can see debugging
information:
nbdkit -fv ./myplugin.so [key=value [key=value [...]]]
To print debugging information from within the plugin, call nbdkit_debug(3). Note that
nbdkit_debug(3) only prints things when the server is in verbose mode (-v option).
Debug Flags
The -v option switches general debugging on or off, and this debugging should be used for
messages which are useful for all users of your plugin.
In cases where you want to enable specific extra debugging to track down bugs in plugins
or filters — mainly for use by the plugin/filter developers themselves — you can define
Debug Flags. These are global ints called "myplugin_debug_*":
int myplugin_debug_foo;
int myplugin_debug_bar;
...
if (myplugin_debug_foo) {
nbdkit_debug ("lots of extra debugging about foo: ...");
}
Debug Flags can be controlled on the command line using the -D (or --debug) option:
nbdkit -f -v -D myplugin.foo=1 -D myplugin.bar=2 myplugin [...]
Note "myplugin" is the name passed to ".name" in the "struct nbdkit_plugin".
You should only use this feature for debug settings. For general settings use ordinary
plugin parameters. Debug Flags can only be C ints. They are not supported by non-C
language plugins.
For convenience '.' characters are replaced with '_' characters in the variable name, so
both of these parameters:
-D myplugin.foo_bar=1
-D myplugin.foo.bar=1
correspond to the plugin variable "myplugin_debug_foo_bar".
COMPILING THE PLUGIN
Plugins should be compiled as shared libraries. There are various ways to achieve this,
but most Linux compilers support a -shared option to create the shared library directly,
for example:
gcc -fPIC -shared myplugin.c -o myplugin.so
Note that the shared library will have undefined symbols for functions that you call like
nbdkit_parse_int(3) or nbdkit_error(3). These will be resolved by the server binary when
nbdkit dlopens the plugin.
PKG-CONFIG/PKGCONF
nbdkit provides a pkg-config/pkgconf file called "nbdkit.pc" which should be installed on
the correct path when the nbdkit plugin development environment is installed. You can use
this in autoconf configure.ac scripts to test for the development environment:
PKG_CHECK_MODULES([NBDKIT], [nbdkit >= 1.2.3])
The above will fail unless nbdkit ≥ 1.2.3 and the header file is installed, and will set
"NBDKIT_CFLAGS" and "NBDKIT_LIBS" appropriately for compiling plugins.
You can also run pkg-config/pkgconf directly, for example:
if ! pkg-config nbdkit --exists; then
echo "you must install the nbdkit plugin development environment"
exit 1
fi
You can also substitute the plugindir variable by doing:
PKG_CHECK_VAR([NBDKIT_PLUGINDIR], [nbdkit], [plugindir])
which defines "$(NBDKIT_PLUGINDIR)" in automake-generated Makefiles.
If nbdkit development headers are installed in a non-standard location then you may need
to compile plugins using:
gcc -fPIC -shared myplugin.c -o myplugin.so \
`pkg-config nbdkit --cflags --libs`
INSTALLING THE PLUGIN
The plugin is a "*.so" file and possibly a manual page. You can of course install the
plugin "*.so" file wherever you want, and users will be able to use it by running:
nbdkit /path/to/plugin.so [args]
However if the shared library has a name of the form "nbdkit-name-plugin.so" and if the
library is installed in the $plugindir directory, then users can be run it by only typing:
nbdkit name [args]
The location of the $plugindir directory is set when nbdkit is compiled and can be found
by doing:
nbdkit --dump-config
If using the pkg-config/pkgconf system then you can also find the plugin directory at
compile time by doing:
pkg-config nbdkit --variable=plugindir
WRITING PLUGINS IN C++
Plugins in C++ work almost exactly like those in C, but the way you define the
"nbdkit_plugin" struct is slightly different:
namespace {
nbdkit_plugin create_plugin() {
nbdkit_plugin plugin = nbdkit_plugin ();
plugin.name = "myplugin";
plugin.open = myplugin_open;
plugin.get_size = myplugin_get_size;
plugin.pread = myplugin_pread;
plugin.pwrite = myplugin_pwrite;
return plugin;
}
}
static struct nbdkit_plugin plugin = create_plugin ();
NBDKIT_REGISTER_PLUGIN(plugin)
WRITING PLUGINS IN OTHER PROGRAMMING LANGUAGES
You can also write nbdkit plugins in Go, Lua, OCaml, Perl, Python, Rust, shell script or
Tcl. Other programming languages may be offered in future.
Ruby plugin support was removed in nbdkit 1.40.
For more information see: nbdkit-cc-plugin(3), nbdkit-golang-plugin(3),
nbdkit-lua-plugin(3), nbdkit-ocaml-plugin(3), nbdkit-perl-plugin(3),
nbdkit-python-plugin(3), nbdkit-rust-plugin(3), nbdkit-sh-plugin(3), nbdkit-tcl-plugin(3)
.
Plugins written in scripting languages may also be installed in $plugindir. These must be
called "nbdkit-name-plugin" without any extension. They must be executable, and they must
use the shebang header (see "Shebang scripts" in nbdkit(1)). For example a plugin written
in Perl called "foo.pl" might be installed like this:
$ head -1 foo.pl
#!/usr/sbin/nbdkit perl
$ sudo install -m 0755 foo.pl $plugindir/nbdkit-foo-plugin
and then users will be able to run it like this:
$ nbdkit foo [args ...]
SEE ALSO
nbdkit(1), nbdkit-nozero-filter(1), nbdkit-tls-fallback-filter(1), nbdkit-filter(3).
Utility functions provided by nbdkit for plugins and filters to use:
nbdkit_absolute_path(3), nbdkit_debug(3), nbdkit_disconnect(3), nbdkit_error(3),
nbdkit_export_name(3), nbdkit_is_tls(3), nbdkit_nanosleep(3), nbdkit_parse_bool(3),
nbdkit_parse_delay(3), nbdkit_parse_int(3), nbdkit_parse_int16_t(3),
nbdkit_parse_int32_t(3), nbdkit_parse_int64_t(3), nbdkit_parse_int8_t(3),
nbdkit_parse_probability(3), nbdkit_parse_size(3), nbdkit_parse_uint16_t(3),
nbdkit_parse_uint32_t(3), nbdkit_parse_uint64_t(3), nbdkit_parse_uint8_t(3),
nbdkit_parse_unsigned(3), nbdkit_peer_gid(3), nbdkit_peer_name(3), nbdkit_peer_pid(3),
nbdkit_peer_security_context(3), nbdkit_peer_tls_dn(3). nbdkit_peer_tls_issuer_dn(3).
nbdkit_peer_uid(3), nbdkit_printf_intern(3), nbdkit_read_password(3), nbdkit_realpath(3),
nbdkit_set_error(3), nbdkit_shutdown(3), nbdkit_stdio_safe(3), nbdkit_strdup_intern(3),
nbdkit_strndup_intern(3), nbdkit_vdebug(3), nbdkit_verror(3), nbdkit_vprintf_intern(3).
Standard plugins provided by nbdkit:
nbdkit-blkio-plugin(1), nbdkit-cdi-plugin(1), nbdkit-curl-plugin(1),
nbdkit-data-plugin(1), nbdkit-eval-plugin(1), nbdkit-example1-plugin(1),
nbdkit-example2-plugin(1), nbdkit-example3-plugin(1), nbdkit-example4-plugin(1),
nbdkit-file-plugin(1), nbdkit-floppy-plugin(1), nbdkit-full-plugin(1),
nbdkit-gcs-plugin(1), nbdkit-guestfs-plugin(1), nbdkit-info-plugin(1),
nbdkit-iso-plugin(1), nbdkit-libvirt-plugin(1), nbdkit-linuxdisk-plugin(1),
nbdkit-memory-plugin(1), nbdkit-nbd-plugin(1), nbdkit-null-plugin(1),
nbdkit-ondemand-plugin(1), nbdkit-ones-plugin(1), nbdkit-partitioning-plugin(1),
nbdkit-pattern-plugin(1), nbdkit-random-plugin(1), nbdkit-S3-plugin(1),
nbdkit-sparse-random-plugin(1), nbdkit-split-plugin(1), nbdkit-ssh-plugin(1),
nbdkit-tmpdisk-plugin(1), nbdkit-torrent-plugin(1), nbdkit-vddk-plugin(1),
nbdkit-zero-plugin(1) ; nbdkit-cc-plugin(3), nbdkit-golang-plugin(3),
nbdkit-lua-plugin(3), nbdkit-ocaml-plugin(3), nbdkit-perl-plugin(3),
nbdkit-python-plugin(3), nbdkit-rust-plugin(3), nbdkit-sh-plugin(3), nbdkit-tcl-plugin(3)
.
AUTHORS
Eric Blake
Richard W.M. Jones
Pino Toscano
COPYRIGHT
Copyright Red Hat
LICENSE
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
• Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
• Redistributions in binary form must reproduce the above copyright notice, this list of
conditions and the following disclaimer in the documentation and/or other materials
provided with the distribution.
• Neither the name of Red Hat nor the names of its contributors may be used to endorse
or promote products derived from this software without specific prior written
permission.
THIS SOFTWARE IS PROVIDED BY RED HAT AND CONTRIBUTORS ''AS IS'' AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL RED HAT OR CONTRIBUTORS
BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.