Provided by: libpth-dev_2.0.7-19ubuntu1_amd64 
NAME
pth - GNU Portable Threads
VERSION
GNU Pth 2.0.7 (08-Jun-2006)
SYNOPSIS
Global Library Management
pth_init, pth_kill, pth_ctrl, pth_version.
Thread Attribute Handling
pth_attr_of, pth_attr_new, pth_attr_init, pth_attr_set, pth_attr_get,
pth_attr_destroy.
Thread Control
pth_spawn, pth_once, pth_self, pth_suspend, pth_resume, pth_yield, pth_nap, pth_wait,
pth_cancel, pth_abort, pth_raise, pth_join, pth_exit.
Utilities
pth_fdmode, pth_time, pth_timeout, pth_sfiodisc.
Cancellation Management
pth_cancel_point, pth_cancel_state.
Event Handling
pth_event, pth_event_typeof, pth_event_extract, pth_event_concat, pth_event_isolate,
pth_event_walk, pth_event_status, pth_event_free.
Key-Based Storage
pth_key_create, pth_key_delete, pth_key_setdata, pth_key_getdata.
Message Port Communication
pth_msgport_create, pth_msgport_destroy, pth_msgport_find, pth_msgport_pending,
pth_msgport_put, pth_msgport_get, pth_msgport_reply.
Thread Cleanups
pth_cleanup_push, pth_cleanup_pop.
Process Forking
pth_atfork_push, pth_atfork_pop, pth_fork.
Synchronization
pth_mutex_init, pth_mutex_acquire, pth_mutex_release, pth_rwlock_init,
pth_rwlock_acquire, pth_rwlock_release, pth_cond_init, pth_cond_await,
pth_cond_notify, pth_barrier_init, pth_barrier_reach.
User-Space Context
pth_uctx_create, pth_uctx_make, pth_uctx_switch, pth_uctx_destroy.
Generalized POSIX Replacement API
pth_sigwait_ev, pth_accept_ev, pth_connect_ev, pth_select_ev, pth_poll_ev,
pth_read_ev, pth_readv_ev, pth_write_ev, pth_writev_ev, pth_recv_ev, pth_recvfrom_ev,
pth_send_ev, pth_sendto_ev.
Standard POSIX Replacement API
pth_nanosleep, pth_usleep, pth_sleep, pth_waitpid, pth_system, pth_sigmask,
pth_sigwait, pth_accept, pth_connect, pth_select, pth_pselect, pth_poll, pth_read,
pth_readv, pth_write, pth_writev, pth_pread, pth_pwrite, pth_recv, pth_recvfrom,
pth_send, pth_sendto.
DESCRIPTION
____ _ _
⎪ _ \⎪ ⎪_⎪ ⎪__
⎪ ⎪_) ⎪ __⎪ '_ \ ``Only those who attempt
⎪ __/⎪ ⎪_⎪ ⎪ ⎪ ⎪ the absurd can achieve
⎪_⎪ \__⎪_⎪ ⎪_⎪ the impossible.''
Pth is a very portable POSIX/ANSI-C based library for Unix platforms which provides non-
preemptive priority-based scheduling for multiple threads of execution (aka
`multithreading') inside event-driven applications. All threads run in the same address
space of the application process, but each thread has its own individual program counter,
run-time stack, signal mask and "errno" variable.
The thread scheduling itself is done in a cooperative way, i.e., the threads are managed
and dispatched by a priority- and event-driven non-preemptive scheduler. The intention is
that this way both better portability and run-time performance is achieved than with
preemptive scheduling. The event facility allows threads to wait until various types of
internal and external events occur, including pending I/O on file descriptors,
asynchronous signals, elapsed timers, pending I/O on message ports, thread and process
termination, and even results of customized callback functions.
Pth also provides an optional emulation API for POSIX.1c threads (`Pthreads') which can be
used for backward compatibility to existing multithreaded applications. See Pth's
pthread(3) manual page for details.
Threading Background
When programming event-driven applications, usually servers, lots of regular jobs and one-
shot requests have to be processed in parallel. To efficiently simulate this parallel
processing on uniprocessor machines, we use `multitasking' -- that is, we have the
application ask the operating system to spawn multiple instances of itself. On Unix,
typically the kernel implements multitasking in a preemptive and priority-based way
through heavy-weight processes spawned with fork(2). These processes usually do not share
a common address space. Instead they are clearly separated from each other, and are
created by direct cloning a process address space (although modern kernels use memory
segment mapping and copy-on-write semantics to avoid unnecessary copying of physical
memory).
The drawbacks are obvious: Sharing data between the processes is complicated, and can
usually only be done efficiently through shared memory (but which itself is not very
portable). Synchronization is complicated because of the preemptive nature of the Unix
scheduler (one has to use atomic locks, etc). The machine's resources can be exhausted
very quickly when the server application has to serve too many long-running requests
(heavy-weight processes cost memory). And when each request spawns a sub-process to handle
it, the server performance and responsiveness is horrible (heavy-weight processes cost
time to spawn). Finally, the server application doesn't scale very well with the load
because of these resource problems. In practice, lots of tricks are usually used to
overcome these problems - ranging from pre-forked sub-process pools to semi-serialized
processing, etc.
One of the most elegant ways to solve these resource- and data-sharing problems is to have
multiple light-weight threads of execution inside a single (heavy-weight) process, i.e.,
to use multithreading. Those threads usually improve responsiveness and performance of
the application, often improve and simplify the internal program structure, and most
important, require less system resources than heavy-weight processes. Threads are neither
the optimal run-time facility for all types of applications, nor can all applications
benefit from them. But at least event-driven server applications usually benefit greatly
from using threads.
The World of Threading
Even though lots of documents exists which describe and define the world of threading, to
understand Pth, you need only basic knowledge about threading. The following definitions
of thread-related terms should at least help you understand thread programming enough to
allow you to use Pth.
o process vs. thread
A process on Unix systems consists of at least the following fundamental ingredients:
virtual memory table, program code, program counter, heap memory, stack memory, stack
pointer, file descriptor set, signal table. On every process switch, the kernel saves
and restores these ingredients for the individual processes. On the other hand, a thread
consists of only a private program counter, stack memory, stack pointer and signal
table. All other ingredients, in particular the virtual memory, it shares with the other
threads of the same process.
o kernel-space vs. user-space threading
Threads on a Unix platform traditionally can be implemented either inside kernel-space
or user-space. When threads are implemented by the kernel, the thread context switches
are performed by the kernel without the application's knowledge. Similarly, when threads
are implemented in user-space, the thread context switches are performed by an
application library, without the kernel's knowledge. There also are hybrid threading
approaches where, typically, a user-space library binds one or more user-space threads
to one or more kernel-space threads (there usually called light-weight processes - or in
short LWPs).
User-space threads are usually more portable and can perform faster and cheaper context
switches (for instance via swapcontext(2) or setjmp(3)/longjmp(3)) than kernel based
threads. On the other hand, kernel-space threads can take advantage of multiprocessor
machines and don't have any inherent I/O blocking problems. Kernel-space threads are
usually scheduled in preemptive way side-by-side with the underlying processes. User-
space threads on the other hand use either preemptive or non-preemptive scheduling.
o preemptive vs. non-preemptive thread scheduling
In preemptive scheduling, the scheduler lets a thread execute until a blocking situation
occurs (usually a function call which would block) or the assigned timeslice elapses.
Then it detracts control from the thread without a chance for the thread to object. This
is usually realized by interrupting the thread through a hardware interrupt signal (for
kernel-space threads) or a software interrupt signal (for user-space threads), like
"SIGALRM" or "SIGVTALRM". In non-preemptive scheduling, once a thread received control
from the scheduler it keeps it until either a blocking situation occurs (again a
function call which would block and instead switches back to the scheduler) or the
thread explicitly yields control back to the scheduler in a cooperative way.
o concurrency vs. parallelism
Concurrency exists when at least two threads are in progress at the same time.
Parallelism arises when at least two threads are executing simultaneously. Real
parallelism can be only achieved on multiprocessor machines, of course. But one also
usually speaks of parallelism or high concurrency in the context of preemptive thread
scheduling and of low concurrency in the context of non-preemptive thread scheduling.
o responsiveness
The responsiveness of a system can be described by the user visible delay until the
system responses to an external request. When this delay is small enough and the user
doesn't recognize a noticeable delay, the responsiveness of the system is considered
good. When the user recognizes or is even annoyed by the delay, the responsiveness of
the system is considered bad.
o reentrant, thread-safe and asynchronous-safe functions
A reentrant function is one that behaves correctly if it is called simultaneously by
several threads and then also executes simultaneously. Functions that access global
state, such as memory or files, of course, need to be carefully designed in order to be
reentrant. Two traditional approaches to solve these problems are caller-supplied states
and thread-specific data.
Thread-safety is the avoidance of data races, i.e., situations in which data is set to
either correct or incorrect value depending upon the (unpredictable) order in which
multiple threads access and modify the data. So a function is thread-safe when it still
behaves semantically correct when called simultaneously by several threads (it is not
required that the functions also execute simultaneously). The traditional approach to
achieve thread-safety is to wrap a function body with an internal mutual exclusion lock
(aka `mutex'). As you should recognize, reentrant is a stronger attribute than
thread-safe, because it is harder to achieve and results especially in no run-time
contention between threads. So, a reentrant function is always thread-safe, but not vice
versa.
Additionally there is a related attribute for functions named asynchronous-safe, which
comes into play in conjunction with signal handlers. This is very related to the problem
of reentrant functions. An asynchronous-safe function is one that can be called safe and
without side-effects from within a signal handler context. Usually very few functions
are of this type, because an application is very restricted in what it can perform from
within a signal handler (especially what system functions it is allowed to call). The
reason mainly is, because only a few system functions are officially declared by POSIX
as guaranteed to be asynchronous-safe. Asynchronous-safe functions usually have to be
already reentrant.
User-Space Threads
User-space threads can be implemented in various way. The two traditional approaches are:
1. Matrix-based explicit dispatching between small units of execution:
Here the global procedures of the application are split into small execution units
(each is required to not run for more than a few milliseconds) and those units are
implemented by separate functions. Then a global matrix is defined which describes the
execution (and perhaps even dependency) order of these functions. The main server
procedure then just dispatches between these units by calling one function after each
other controlled by this matrix. The threads are created by more than one jump-trail
through this matrix and by switching between these jump-trails controlled by
corresponding occurred events.
This approach gives the best possible performance, because one can fine-tune the
threads of execution by adjusting the matrix, and the scheduling is done explicitly by
the application itself. It is also very portable, because the matrix is just an
ordinary data structure, and functions are a standard feature of ANSI C.
The disadvantage of this approach is that it is complicated to write large applications
with this approach, because in those applications one quickly gets hundreds(!) of
execution units and the control flow inside such an application is very hard to
understand (because it is interrupted by function borders and one always has to
remember the global dispatching matrix to follow it). Additionally, all threads operate
on the same execution stack. Although this saves memory, it is often nasty, because one
cannot switch between threads in the middle of a function. Thus the scheduling borders
are the function borders.
2. Context-based implicit scheduling between threads of execution:
Here the idea is that one programs the application as with forked processes, i.e., one
spawns a thread of execution and this runs from the begin to the end without an
interrupted control flow. But the control flow can be still interrupted - even in the
middle of a function. Actually in a preemptive way, similar to what the kernel does
for the heavy-weight processes, i.e., every few milliseconds the user-space scheduler
switches between the threads of execution. But the thread itself doesn't recognize this
and usually (except for synchronization issues) doesn't have to care about this.
The advantage of this approach is that it's very easy to program, because the control
flow and context of a thread directly follows a procedure without forced interrupts
through function borders. Additionally, the programming is very similar to a
traditional and well understood fork(2) based approach.
The disadvantage is that although the general performance is increased, compared to
using approaches based on heavy-weight processes, it is decreased compared to the
matrix-approach above. Because the implicit preemptive scheduling does usually a lot
more context switches (every user-space context switch costs some overhead even when it
is a lot cheaper than a kernel-level context switch) than the explicit
cooperative/non-preemptive scheduling. Finally, there is no really portable
POSIX/ANSI-C based way to implement user-space preemptive threading. Either the
platform already has threads, or one has to hope that some semi-portable package exists
for it. And even those semi-portable packages usually have to deal with assembler code
and other nasty internals and are not easy to port to forthcoming platforms.
So, in short: the matrix-dispatching approach is portable and fast, but nasty to program.
The thread scheduling approach is easy to program, but suffers from synchronization and
portability problems caused by its preemptive nature.
The Compromise of Pth
But why not combine the good aspects of both approaches while avoiding their bad aspects?
That's the goal of Pth. Pth implements easy-to-program threads of execution, but avoids
the problems of preemptive scheduling by using non-preemptive scheduling instead.
This sounds like, and is, a useful approach. Nevertheless, one has to keep the
implications of non-preemptive thread scheduling in mind when working with Pth. The
following list summarizes a few essential points:
o Pth provides maximum portability, but NOT the fanciest features.
This is, because it uses a nifty and portable POSIX/ANSI-C approach for thread creation
(and this way doesn't require any platform dependent assembler hacks) and schedules the
threads in non-preemptive way (which doesn't require unportable facilities like
"SIGVTALRM"). On the other hand, this way not all fancy threading features can be
implemented. Nevertheless the available facilities are enough to provide a robust and
full-featured threading system.
o Pth increases the responsiveness and concurrency of an event-driven application, but NOT
the concurrency of number-crunching applications.
The reason is the non-preemptive scheduling. Number-crunching applications usually
require preemptive scheduling to achieve concurrency because of their long CPU bursts.
For them, non-preemptive scheduling (even together with explicit yielding) provides only
the old concept of `coroutines'. On the other hand, event driven applications benefit
greatly from non-preemptive scheduling. They have only short CPU bursts and lots of
events to wait on, and this way run faster under non-preemptive scheduling because no
unnecessary context switching occurs, as it is the case for preemptive scheduling.
That's why Pth is mainly intended for server type applications, although there is no
technical restriction.
o Pth requires thread-safe functions, but NOT reentrant functions.
This nice fact exists again because of the nature of non-preemptive scheduling, where a
function isn't interrupted and this way cannot be reentered before it returned. This is
a great portability benefit, because thread-safety can be achieved more easily than
reentrance possibility. Especially this means that under Pth more existing third-party
libraries can be used without side-effects than it's the case for other threading
systems.
o Pth doesn't require any kernel support, but can NOT benefit from multiprocessor
machines.
This means that Pth runs on almost all Unix kernels, because the kernel does not need to
be aware of the Pth threads (because they are implemented entirely in user-space). On
the other hand, it cannot benefit from the existence of multiprocessors, because for
this, kernel support would be needed. In practice, this is no problem, because
multiprocessor systems are rare, and portability is almost more important than highest
concurrency.
The life cycle of a thread
To understand the Pth Application Programming Interface (API), it helps to first
understand the life cycle of a thread in the Pth threading system. It can be illustrated
with the following directed graph:
NEW
⎪
V
+---> READY ---+
⎪ ^ ⎪
⎪ ⎪ V
WAITING <--+-- RUNNING
⎪
: V
SUSPENDED DEAD
When a new thread is created, it is moved into the NEW queue of the scheduler. On the next
dispatching for this thread, the scheduler picks it up from there and moves it to the
READY queue. This is a queue containing all threads which want to perform a CPU burst.
There they are queued in priority order. On each dispatching step, the scheduler always
removes the thread with the highest priority only. It then increases the priority of all
remaining threads by 1, to prevent them from `starving'.
The thread which was removed from the READY queue is the new RUNNING thread (there is
always just one RUNNING thread, of course). The RUNNING thread is assigned execution
control. After this thread yields execution (either explicitly by yielding execution or
implicitly by calling a function which would block) there are three possibilities: Either
it has terminated, then it is moved to the DEAD queue, or it has events on which it wants
to wait, then it is moved into the WAITING queue. Else it is assumed it wants to perform
more CPU bursts and immediately enters the READY queue again.
Before the next thread is taken out of the READY queue, the WAITING queue is checked for
pending events. If one or more events occurred, the threads that are waiting on them are
immediately moved to the READY queue.
The purpose of the NEW queue has to do with the fact that in Pth a thread never directly
switches to another thread. A thread always yields execution to the scheduler and the
scheduler dispatches to the next thread. So a freshly spawned thread has to be kept
somewhere until the scheduler gets a chance to pick it up for scheduling. That is what the
NEW queue is for.
The purpose of the DEAD queue is to support thread joining. When a thread is marked to be
unjoinable, it is directly kicked out of the system after it terminated. But when it is
joinable, it enters the DEAD queue. There it remains until another thread joins it.
Finally, there is a special separated queue named SUSPENDED, to where threads can be
manually moved from the NEW, READY or WAITING queues by the application. The purpose of
this special queue is to temporarily absorb suspended threads until they are again resumed
by the application. Suspended threads do not cost scheduling or event handling resources,
because they are temporarily completely out of the scheduler's scope. If a thread is
resumed, it is moved back to the queue from where it originally came and this way again
enters the schedulers scope.
APPLICATION PROGRAMMING INTERFACE (API)
In the following the Pth Application Programming Interface (API) is discussed in detail.
With the knowledge given above, it should now be easy to understand how to program threads
with this API. In good Unix tradition, Pth functions use special return values ("NULL" in
pointer context, "FALSE" in boolean context and "-1" in integer context) to indicate an
error condition and set (or pass through) the "errno" system variable to pass more details
about the error to the caller.
Global Library Management
The following functions act on the library as a whole. They are used to initialize and
shutdown the scheduler and fetch information from it.
int pth_init(void);
This initializes the Pth library. It has to be the first Pth API function call in an
application, and is mandatory. It's usually done at the begin of the main() function
of the application. This implicitly spawns the internal scheduler thread and
transforms the single execution unit of the current process into a thread (the `main'
thread). It returns "TRUE" on success and "FALSE" on error.
int pth_kill(void);
This kills the Pth library. It should be the last Pth API function call in an
application, but is not really required. It's usually done at the end of the main
function of the application. At least, it has to be called from within the main
thread. It implicitly kills all threads and transforms back the calling thread into
the single execution unit of the underlying process. The usual way to terminate a Pth
application is either a simple `"pth_exit(0);"' in the main thread (which waits for
all other threads to terminate, kills the threading system and then terminates the
process) or a `"pth_kill(); exit(0)"' (which immediately kills the threading system
and terminates the process). The pth_kill() return immediately with a return code of
"FALSE" if it is not called from within the main thread. Else it kills the threading
system and returns "TRUE".
long pth_ctrl(unsigned long query, ...);
This is a generalized query/control function for the Pth library. The argument query
is a bitmask formed out of one or more "PTH_CTRL_"XXXX queries. Currently the
following queries are supported:
"PTH_CTRL_GETTHREADS"
This returns the total number of threads currently in existence. This query
actually is formed out of the combination of queries for threads in a particular
state, i.e., the "PTH_CTRL_GETTHREADS" query is equal to the OR-combination of all
the following specialized queries:
"PTH_CTRL_GETTHREADS_NEW" for the number of threads in the new queue (threads
created via pth_spawn(3) but still not scheduled once),
"PTH_CTRL_GETTHREADS_READY" for the number of threads in the ready queue (threads
who want to do CPU bursts), "PTH_CTRL_GETTHREADS_RUNNING" for the number of
running threads (always just one thread!), "PTH_CTRL_GETTHREADS_WAITING" for the
number of threads in the waiting queue (threads waiting for events),
"PTH_CTRL_GETTHREADS_SUSPENDED" for the number of threads in the suspended queue
(threads waiting to be resumed) and "PTH_CTRL_GETTHREADS_DEAD" for the number of
threads in the new queue (terminated threads waiting for a join).
"PTH_CTRL_GETAVLOAD"
This requires a second argument of type `"float *"' (pointer to a floating point
variable). It stores a floating point value describing the exponential averaged
load of the scheduler in this variable. The load is a function from the number of
threads in the ready queue of the schedulers dispatching unit. So a load around
1.0 means there is only one ready thread (the standard situation when the
application has no high load). A higher load value means there a more threads
ready who want to do CPU bursts. The average load value updates once per second
only. The return value for this query is always 0.
"PTH_CTRL_GETPRIO"
This requires a second argument of type `"pth_t"' which identifies a thread. It
returns the priority (ranging from "PTH_PRIO_MIN" to "PTH_PRIO_MAX") of the given
thread.
"PTH_CTRL_GETNAME"
This requires a second argument of type `"pth_t"' which identifies a thread. It
returns the name of the given thread, i.e., the return value of pth_ctrl(3) should
be casted to a `"char *"'.
"PTH_CTRL_DUMPSTATE"
This requires a second argument of type `"FILE *"' to which a summary of the
internal Pth library state is written to. The main information which is currently
written out is the current state of the thread pool.
"PTH_CTRL_FAVOURNEW"
This requires a second argument of type `"int"' which specified whether the GNU
Pth scheduler favours new threads on startup, i.e., whether they are moved from
the new queue to the top (argument is "TRUE") or middle (argument is "FALSE") of
the ready queue. The default is to favour new threads to make sure they do not
starve already at startup, although this slightly violates the strict priority
based scheduling.
The function returns "-1" on error.
long pth_version(void);
This function returns a hex-value `0xVRRTLL' which describes the current Pth library
version. V is the version, RR the revisions, LL the level and T the type of the level
(alphalevel=0, betalevel=1, patchlevel=2, etc). For instance Pth version 1.0b1 is
encoded as 0x100101. The reason for this unusual mapping is that this way the version
number is steadily increasing. The same value is also available under compile time as
"PTH_VERSION".
Thread Attribute Handling
Attribute objects are used in Pth for two things: First stand-alone/unbound attribute
objects are used to store attributes for to be spawned threads. Bounded attribute objects
are used to modify attributes of already existing threads. The following attribute fields
exists in attribute objects:
"PTH_ATTR_PRIO" (read-write) ["int"]
Thread Priority between "PTH_PRIO_MIN" and "PTH_PRIO_MAX". The default is
"PTH_PRIO_STD".
"PTH_ATTR_NAME" (read-write) ["char *"]
Name of thread (up to 40 characters are stored only), mainly for debugging purposes.
"PTH_ATTR_DISPATCHES" (read-write) ["int"]
In bounded attribute objects, this field is incremented every time the context is
switched to the associated thread.
"PTH_ATTR_JOINABLE" (read-write> ["int"]
The thread detachment type, "TRUE" indicates a joinable thread, "FALSE" indicates a
detached thread. When a thread is detached, after termination it is immediately kicked
out of the system instead of inserted into the dead queue.
"PTH_ATTR_CANCEL_STATE" (read-write) ["unsigned int"]
The thread cancellation state, i.e., a combination of "PTH_CANCEL_ENABLE" or
"PTH_CANCEL_DISABLE" and "PTH_CANCEL_DEFERRED" or "PTH_CANCEL_ASYNCHRONOUS".
"PTH_ATTR_STACK_SIZE" (read-write) ["unsigned int"]
The thread stack size in bytes. Use lower values than 64 KB with great care!
"PTH_ATTR_STACK_ADDR" (read-write) ["char *"]
A pointer to the lower address of a chunk of malloc(3)'ed memory for the stack.
"PTH_ATTR_TIME_SPAWN" (read-only) ["pth_time_t"]
The time when the thread was spawned. This can be queried only when the attribute
object is bound to a thread.
"PTH_ATTR_TIME_LAST" (read-only) ["pth_time_t"]
The time when the thread was last dispatched. This can be queried only when the
attribute object is bound to a thread.
"PTH_ATTR_TIME_RAN" (read-only) ["pth_time_t"]
The total time the thread was running. This can be queried only when the attribute
object is bound to a thread.
"PTH_ATTR_START_FUNC" (read-only) ["void *(*)(void *)"]
The thread start function. This can be queried only when the attribute object is
bound to a thread.
"PTH_ATTR_START_ARG" (read-only) ["void *"]
The thread start argument. This can be queried only when the attribute object is
bound to a thread.
"PTH_ATTR_STATE" (read-only) ["pth_state_t"]
The scheduling state of the thread, i.e., either "PTH_STATE_NEW", "PTH_STATE_READY",
"PTH_STATE_WAITING", or "PTH_STATE_DEAD" This can be queried only when the attribute
object is bound to a thread.
"PTH_ATTR_EVENTS" (read-only) ["pth_event_t"]
The event ring the thread is waiting for. This can be queried only when the attribute
object is bound to a thread.
"PTH_ATTR_BOUND" (read-only) ["int"]
Whether the attribute object is bound ("TRUE") to a thread or not ("FALSE").
The following API functions can be used to handle the attribute objects:
pth_attr_t pth_attr_of(pth_t tid);
This returns a new attribute object bound to thread tid. Any queries on this object
directly fetch attributes from tid. And attribute modifications directly change tid.
Use such attribute objects to modify existing threads.
pth_attr_t pth_attr_new(void);
This returns a new unbound attribute object. An implicit pth_attr_init() is done on
it. Any queries on this object just fetch stored attributes from it. And attribute
modifications just change the stored attributes. Use such attribute objects to pre-
configure attributes for to be spawned threads.
int pth_attr_init(pth_attr_t attr);
This initializes an attribute object attr to the default values: "PTH_ATTR_PRIO" :=
"PTH_PRIO_STD", "PTH_ATTR_NAME" := `"unknown"', "PTH_ATTR_DISPATCHES" := 0,
"PTH_ATTR_JOINABLE" := "TRUE", "PTH_ATTR_CANCELSTATE" := "PTH_CANCEL_DEFAULT",
"PTH_ATTR_STACK_SIZE" := 64*1024 and "PTH_ATTR_STACK_ADDR" := "NULL". All other
"PTH_ATTR_*" attributes are read-only attributes and don't receive default values in
attr, because they exists only for bounded attribute objects.
int pth_attr_set(pth_attr_t attr, int field, ...);
This sets the attribute field field in attr to a value specified as an additional
argument on the variable argument list. The following attribute fields and argument
pairs can be used:
PTH_ATTR_PRIO int
PTH_ATTR_NAME char *
PTH_ATTR_DISPATCHES int
PTH_ATTR_JOINABLE int
PTH_ATTR_CANCEL_STATE unsigned int
PTH_ATTR_STACK_SIZE unsigned int
PTH_ATTR_STACK_ADDR char *
int pth_attr_get(pth_attr_t attr, int field, ...);
This retrieves the attribute field field in attr and stores its value in the variable
specified through a pointer in an additional argument on the variable argument list.
The following fields and argument pairs can be used:
PTH_ATTR_PRIO int *
PTH_ATTR_NAME char **
PTH_ATTR_DISPATCHES int *
PTH_ATTR_JOINABLE int *
PTH_ATTR_CANCEL_STATE unsigned int *
PTH_ATTR_STACK_SIZE unsigned int *
PTH_ATTR_STACK_ADDR char **
PTH_ATTR_TIME_SPAWN pth_time_t *
PTH_ATTR_TIME_LAST pth_time_t *
PTH_ATTR_TIME_RAN pth_time_t *
PTH_ATTR_START_FUNC void *(**)(void *)
PTH_ATTR_START_ARG void **
PTH_ATTR_STATE pth_state_t *
PTH_ATTR_EVENTS pth_event_t *
PTH_ATTR_BOUND int *
int pth_attr_destroy(pth_attr_t attr);
This destroys a attribute object attr. After this attr is no longer a valid attribute
object.
Thread Control
The following functions control the threading itself and make up the main API of the Pth
library.
pth_t pth_spawn(pth_attr_t attr, void *(*entry)(void *), void *arg);
This spawns a new thread with the attributes given in attr (or "PTH_ATTR_DEFAULT" for
default attributes - which means that thread priority, joinability and cancel state
are inherited from the current thread) with the starting point at routine entry; the
dispatch count is not inherited from the current thread if attr is not specified -
rather, it is initialized to zero. This entry routine is called as
`pth_exit(entry(arg))' inside the new thread unit, i.e., entry's return value is fed
to an implicit pth_exit(3). So the thread can also exit by just returning.
Nevertheless the thread can also exit explicitly at any time by calling pth_exit(3).
But keep in mind that calling the POSIX function exit(3) still terminates the complete
process and not just the current thread.
There is no Pth-internal limit on the number of threads one can spawn, except the
limit implied by the available virtual memory. Pth internally keeps track of thread in
dynamic data structures. The function returns "NULL" on error.
int pth_once(pth_once_t *ctrlvar, void (*func)(void *), void *arg);
This is a convenience function which uses a control variable of type "pth_once_t" to
make sure a constructor function func is called only once as `func(arg)' in the
system. In other words: Only the first call to pth_once(3) by any thread in the system
succeeds. The variable referenced via ctrlvar should be declared as `"pth_once_t"
variable-name = "PTH_ONCE_INIT";' before calling this function.
pth_t pth_self(void);
This just returns the unique thread handle of the currently running thread. This
handle itself has to be treated as an opaque entity by the application. It's usually
used as an argument to other functions who require an argument of type "pth_t".
int pth_suspend(pth_t tid);
This suspends a thread tid until it is manually resumed again via pth_resume(3). For
this, the thread is moved to the SUSPENDED queue and this way is completely out of the
scheduler's event handling and thread dispatching scope. Suspending the current thread
is not allowed. The function returns "TRUE" on success and "FALSE" on errors.
int pth_resume(pth_t tid);
This function resumes a previously suspended thread tid, i.e. tid has to stay on the
SUSPENDED queue. The thread is moved to the NEW, READY or WAITING queue (dependent on
what its state was when the pth_suspend(3) call were made) and this way again enters
the event handling and thread dispatching scope of the scheduler. The function returns
"TRUE" on success and "FALSE" on errors.
int pth_raise(pth_t tid, int sig)
This function raises a signal for delivery to thread tid only. When one just raises a
signal via raise(3) or kill(2), its delivered to an arbitrary thread which has this
signal not blocked. With pth_raise(3) one can send a signal to a thread and its
guarantees that only this thread gets the signal delivered. But keep in mind that
nevertheless the signals action is still configured process-wide. When sig is 0 plain
thread checking is performed, i.e., `"pth_raise(tid, 0)"' returns "TRUE" when thread
tid still exists in the PTH system but doesn't send any signal to it.
int pth_yield(pth_t tid);
This explicitly yields back the execution control to the scheduler thread. Usually
the execution is implicitly transferred back to the scheduler when a thread waits for
an event. But when a thread has to do larger CPU bursts, it can be reasonable to
interrupt it explicitly by doing a few pth_yield(3) calls to give other threads a
chance to execute, too. This obviously is the cooperating part of Pth. A thread has
not to yield execution, of course. But when you want to program a server application
with good response times the threads should be cooperative, i.e., when they should
split their CPU bursts into smaller units with this call.
Usually one specifies tid as "NULL" to indicate to the scheduler that it can freely
decide which thread to dispatch next. But if one wants to indicate to the scheduler
that a particular thread should be favored on the next dispatching step, one can
specify this thread explicitly. This allows the usage of the old concept of coroutines
where a thread/routine switches to a particular cooperating thread. If tid is not
"NULL" and points to a new or ready thread, it is guaranteed that this thread receives
execution control on the next dispatching step. If tid is in a different state (that
is, not in "PTH_STATE_NEW" or "PTH_STATE_READY") an error is reported.
The function usually returns "TRUE" for success and only "FALSE" (with "errno" set to
"EINVAL") if tid specified an invalid or still not new or ready thread.
int pth_nap(pth_time_t naptime);
This functions suspends the execution of the current thread until naptime is elapsed.
naptime is of type "pth_time_t" and this way has theoretically a resolution of one
microsecond. In practice you should neither rely on this nor that the thread is
awakened exactly after naptime has elapsed. It's only guarantees that the thread will
sleep at least naptime. But because of the non-preemptive nature of Pth it can last
longer (when another thread kept the CPU for a long time). Additionally the resolution
is dependent of the implementation of timers by the operating system and these usually
have only a resolution of 10 microseconds or larger. But usually this isn't important
for an application unless it tries to use this facility for real time tasks.
int pth_wait(pth_event_t ev);
This is the link between the scheduler and the event facility (see below for the
various pth_event_xxx() functions). It's modeled like select(2), i.e., one gives this
function one or more events (in the event ring specified by ev) on which the current
thread wants to wait. The scheduler awakes the thread when one ore more of them
occurred or failed after tagging them as such. The ev argument is a pointer to an
event ring which isn't changed except for the tagging. pth_wait(3) returns the number
of occurred or failed events and the application can use pth_event_status(3) to test
which events occurred or failed.
int pth_cancel(pth_t tid);
This cancels a thread tid. How the cancellation is done depends on the cancellation
state of tid which the thread can configure itself. When its state is
"PTH_CANCEL_DISABLE" a cancellation request is just made pending. When it is
"PTH_CANCEL_ENABLE" it depends on the cancellation type what is performed. When its
"PTH_CANCEL_DEFERRED" again the cancellation request is just made pending. But when
its "PTH_CANCEL_ASYNCHRONOUS" the thread is immediately canceled before pth_cancel(3)
returns. The effect of a thread cancellation is equal to implicitly forcing the thread
to call `"pth_exit(PTH_CANCELED)"' at one of his cancellation points. In Pth thread
enter a cancellation point either explicitly via pth_cancel_point(3) or implicitly by
waiting for an event.
int pth_abort(pth_t tid);
This is the cruel way to cancel a thread tid. When it's already dead and waits to be
joined it just joins it (via `"pth_join("tid", NULL)"') and this way kicks it out of
the system. Else it forces the thread to be not joinable and to allow asynchronous
cancellation and then cancels it via `"pth_cancel("tid")"'.
int pth_join(pth_t tid, void **value);
This joins the current thread with the thread specified via tid. It first suspends
the current thread until the tid thread has terminated. Then it is awakened and stores
the value of tid's pth_exit(3) call into *value (if value and not "NULL") and returns
to the caller. A thread can be joined only when it has the attribute
"PTH_ATTR_JOINABLE" set to "TRUE" (the default). A thread can only be joined once,
i.e., after the pth_join(3) call the thread tid is completely removed from the system.
void pth_exit(void *value);
This terminates the current thread. Whether it's immediately removed from the system
or inserted into the dead queue of the scheduler depends on its join type which was
specified at spawning time. If it has the attribute "PTH_ATTR_JOINABLE" set to
"FALSE", it's immediately removed and value is ignored. Else the thread is inserted
into the dead queue and value remembered for a subsequent pth_join(3) call by another
thread.
Utilities
Utility functions.
int pth_fdmode(int fd, int mode);
This switches the non-blocking mode flag on file descriptor fd. The argument mode can
be "PTH_FDMODE_BLOCK" for switching fd into blocking I/O mode, "PTH_FDMODE_NONBLOCK"
for switching fd into non-blocking I/O mode or "PTH_FDMODE_POLL" for just polling the
current mode. The current mode is returned (either "PTH_FDMODE_BLOCK" or
"PTH_FDMODE_NONBLOCK") or "PTH_FDMODE_ERROR" on error. Keep in mind that since Pth 1.1
there is no longer a requirement to manually switch a file descriptor into non-
blocking mode in order to use it. This is automatically done temporarily inside Pth.
Instead when you now switch a file descriptor explicitly into non-blocking mode,
pth_read(3) or pth_write(3) will never block the current thread.
pth_time_t pth_time(long sec, long usec);
This is a constructor for a "pth_time_t" structure which is a convenient function to
avoid temporary structure values. It returns a pth_time_t structure which holds the
absolute time value specified by sec and usec.
pth_time_t pth_timeout(long sec, long usec);
This is a constructor for a "pth_time_t" structure which is a convenient function to
avoid temporary structure values. It returns a pth_time_t structure which holds the
absolute time value calculated by adding sec and usec to the current time.
Sfdisc_t *pth_sfiodisc(void);
This functions is always available, but only reasonably usable when Pth was built with
Sfio support ("--with-sfio" option) and "PTH_EXT_SFIO" is then defined by "pth.h". It
is useful for applications which want to use the comprehensive Sfio I/O library with
the Pth threading library. Then this function can be used to get an Sfio discipline
structure ("Sfdisc_t") which can be pushed onto Sfio streams ("Sfio_t") in order to
let this stream use pth_read(3)/pth_write(2) instead of read(2)/write(2). The benefit
is that this way I/O on the Sfio stream does only block the current thread instead of
the whole process. The application has to free(3) the "Sfdisc_t" structure when it is
no longer needed. The Sfio package can be found at
http://www.research.att.com/sw/tools/sfio/.
Cancellation Management
Pth supports POSIX style thread cancellation via pth_cancel(3) and the following two
related functions:
void pth_cancel_state(int newstate, int *oldstate);
This manages the cancellation state of the current thread. When oldstate is not
"NULL" the function stores the old cancellation state under the variable pointed to by
oldstate. When newstate is not 0 it sets the new cancellation state. oldstate is
created before newstate is set. A state is a combination of "PTH_CANCEL_ENABLE" or
"PTH_CANCEL_DISABLE" and "PTH_CANCEL_DEFERRED" or "PTH_CANCEL_ASYNCHRONOUS".
"PTH_CANCEL_ENABLE⎪PTH_CANCEL_DEFERRED" (or "PTH_CANCEL_DEFAULT") is the default state
where cancellation is possible but only at cancellation points. Use
"PTH_CANCEL_DISABLE" to complete disable cancellation for a thread and
"PTH_CANCEL_ASYNCHRONOUS" for allowing asynchronous cancellations, i.e., cancellations
which can happen at any time.
void pth_cancel_point(void);
This explicitly enter a cancellation point. When the current cancellation state is
"PTH_CANCEL_DISABLE" or no cancellation request is pending, this has no side-effect
and returns immediately. Else it calls `"pth_exit(PTH_CANCELED)"'.
Event Handling
Pth has a very flexible event facility which is linked into the scheduler through the
pth_wait(3) function. The following functions provide the handling of event rings.
pth_event_t pth_event(unsigned long spec, ...);
This creates a new event ring consisting of a single initial event. The type of the
generated event is specified by spec. The following types are available:
"PTH_EVENT_FD"
This is a file descriptor event. One or more of "PTH_UNTIL_FD_READABLE",
"PTH_UNTIL_FD_WRITEABLE" or "PTH_UNTIL_FD_EXCEPTION" have to be OR-ed into spec to
specify on which state of the file descriptor you want to wait. The file
descriptor itself has to be given as an additional argument. Example:
`"pth_event(PTH_EVENT_FD⎪PTH_UNTIL_FD_READABLE, fd)"'.
"PTH_EVENT_SELECT"
This is a multiple file descriptor event modeled directly after the select(2) call
(actually it is also used to implement pth_select(3) internally). It's a
convenient way to wait for a large set of file descriptors at once and at each
file descriptor for a different type of state. Additionally as a nice side-effect
one receives the number of file descriptors which causes the event to be occurred
(using BSD semantics, i.e., when a file descriptor occurred in two sets it's
counted twice). The arguments correspond directly to the select(2) function
arguments except that there is no timeout argument (because timeouts already can
be handled via "PTH_EVENT_TIME" events).
Example: `"pth_event(PTH_EVENT_SELECT, &rc, nfd, rfds, wfds, efds)"' where "rc"
has to be of type `"int *"', "nfd" has to be of type `"int"' and "rfds", "wfds"
and "efds" have to be of type `"fd_set *"' (see select(2)). The number of occurred
file descriptors are stored in "rc".
"PTH_EVENT_SIGS"
This is a signal set event. The two additional arguments have to be a pointer to a
signal set (type `"sigset_t *"') and a pointer to a signal number variable (type
`"int *"'). This event waits until one of the signals in the signal set occurred.
As a result the occurred signal number is stored in the second additional
argument. Keep in mind that the Pth scheduler doesn't block signals automatically.
So when you want to wait for a signal with this event you've to block it via
sigprocmask(2) or it will be delivered without your notice. Example:
`"sigemptyset(&set); sigaddset(&set, SIGINT); pth_event(PTH_EVENT_SIG, &set,
&sig);"'.
"PTH_EVENT_TIME"
This is a time point event. The additional argument has to be of type "pth_time_t"
(usually on-the-fly generated via pth_time(3)). This events waits until the
specified time point has elapsed. Keep in mind that the value is an absolute time
point and not an offset. When you want to wait for a specified amount of time,
you've to add the current time to the offset (usually on-the-fly achieved via
pth_timeout(3)). Example: `"pth_event(PTH_EVENT_TIME, pth_timeout(2,0))"'.
"PTH_EVENT_MSG"
This is a message port event. The additional argument has to be of type
"pth_msgport_t". This events waits until one or more messages were received on the
specified message port. Example: `"pth_event(PTH_EVENT_MSG, mp)"'.
"PTH_EVENT_TID"
This is a thread event. The additional argument has to be of type "pth_t". One of
"PTH_UNTIL_TID_NEW", "PTH_UNTIL_TID_READY", "PTH_UNTIL_TID_WAITING" or
"PTH_UNTIL_TID_DEAD" has to be OR-ed into spec to specify on which state of the
thread you want to wait. Example: `"pth_event(PTH_EVENT_TID⎪PTH_UNTIL_TID_DEAD,
tid)"'.
"PTH_EVENT_FUNC"
This is a custom callback function event. Three additional arguments have to be
given with the following types: `"int (*)(void *)"', `"void *"' and
`"pth_time_t"'. The first is a function pointer to a check function and the second
argument is a user-supplied context value which is passed to this function. The
scheduler calls this function on a regular basis (on his own scheduler stack, so
be very careful!) and the thread is kept sleeping while the function returns
"FALSE". Once it returned "TRUE" the thread will be awakened. The check interval
is defined by the third argument, i.e., the check function is polled again not
until this amount of time elapsed. Example: `"pth_event(PTH_EVENT_FUNC, func, arg,
pth_time(0,500000))"'.
unsigned long pth_event_typeof(pth_event_t ev);
This returns the type of event ev. It's a combination of the describing "PTH_EVENT_XX"
and "PTH_UNTIL_XX" value. This is especially useful to know which arguments have to be
supplied to the pth_event_extract(3) function.
int pth_event_extract(pth_event_t ev, ...);
When pth_event(3) is treated like sprintf(3), then this function is sscanf(3), i.e.,
it is the inverse operation of pth_event(3). This means that it can be used to extract
the ingredients of an event. The ingredients are stored into variables which are
given as pointers on the variable argument list. Which pointers have to be present
depends on the event type and has to be determined by the caller before via
pth_event_typeof(3).
To make it clear, when you constructed ev via `"ev = pth_event(PTH_EVENT_FD, fd);"'
you have to extract it via `"pth_event_extract(ev, &fd)"', etc. For multiple arguments
of an event the order of the pointer arguments is the same as for pth_event(3). But
always keep in mind that you have to always supply pointers to variables and these
variables have to be of the same type as the argument of pth_event(3) required.
pth_event_t pth_event_concat(pth_event_t ev, ...);
This concatenates one or more additional event rings to the event ring ev and returns
ev. The end of the argument list has to be marked with a "NULL" argument. Use this
function to create real events rings out of the single-event rings created by
pth_event(3).
pth_event_t pth_event_isolate(pth_event_t ev);
This isolates the event ev from possibly appended events in the event ring. When in
ev only one event exists, this returns "NULL". When remaining events exists, they form
a new event ring which is returned.
pth_event_t pth_event_walk(pth_event_t ev, int direction);
This walks to the next (when direction is "PTH_WALK_NEXT") or previews (when direction
is "PTH_WALK_PREV") event in the event ring ev and returns this new reached event.
Additionally "PTH_UNTIL_OCCURRED" can be OR-ed into direction to walk to the
next/previous occurred event in the ring ev.
pth_status_t pth_event_status(pth_event_t ev);
This returns the status of event ev. This is a fast operation because only a tag on ev
is checked which was either set or still not set by the scheduler. In other words:
This doesn't check the event itself, it just checks the last knowledge of the
scheduler. The possible returned status codes are: "PTH_STATUS_PENDING" (event is
still pending), "PTH_STATUS_OCCURRED" (event successfully occurred),
"PTH_STATUS_FAILED" (event failed).
int pth_event_free(pth_event_t ev, int mode);
This deallocates the event ev (when mode is "PTH_FREE_THIS") or all events appended to
the event ring under ev (when mode is "PTH_FREE_ALL").
Key-Based Storage
The following functions provide thread-local storage through unique keys similar to the
POSIX Pthread API. Use this for thread specific global data.
int pth_key_create(pth_key_t *key, void (*func)(void *));
This created a new unique key and stores it in key. Additionally func can specify a
destructor function which is called on the current threads termination with the key.
int pth_key_delete(pth_key_t key);
This explicitly destroys a key key.
int pth_key_setdata(pth_key_t key, const void *value);
This stores value under key.
void *pth_key_getdata(pth_key_t key);
This retrieves the value under key.
Message Port Communication
The following functions provide message ports which can be used for efficient and flexible
inter-thread communication.
pth_msgport_t pth_msgport_create(const char *name);
This returns a pointer to a new message port. If name name is not "NULL", the name can
be used by other threads via pth_msgport_find(3) to find the message port in case they
do not know directly the pointer to the message port.
void pth_msgport_destroy(pth_msgport_t mp);
This destroys a message port mp. Before all pending messages on it are replied to
their origin message port.
pth_msgport_t pth_msgport_find(const char *name);
This finds a message port in the system by name and returns the pointer to it.
int pth_msgport_pending(pth_msgport_t mp);
This returns the number of pending messages on message port mp.
int pth_msgport_put(pth_msgport_t mp, pth_message_t *m);
This puts (or sends) a message m to message port mp.
pth_message_t *pth_msgport_get(pth_msgport_t mp);
This gets (or receives) the top message from message port mp. Incoming messages are
always kept in a queue, so there can be more pending messages, of course.
int pth_msgport_reply(pth_message_t *m);
This replies a message m to the message port of the sender.
Thread Cleanups
Per-thread cleanup functions.
int pth_cleanup_push(void (*handler)(void *), void *arg);
This pushes the routine handler onto the stack of cleanup routines for the current
thread. These routines are called in LIFO order when the thread terminates.
int pth_cleanup_pop(int execute);
This pops the top-most routine from the stack of cleanup routines for the current
thread. When execute is "TRUE" the routine is additionally called.
Process Forking
The following functions provide some special support for process forking situations inside
the threading environment.
int pth_atfork_push(void (*prepare)(void *), void (*)(void *parent), void (*)(void
*child), void *arg);
This function declares forking handlers to be called before and after pth_fork(3), in
the context of the thread that called pth_fork(3). The prepare handler is called
before fork(2) processing commences. The parent handler is called after fork(2)
processing completes in the parent process. The child handler is called after fork(2)
processing completed in the child process. If no handling is desired at one or more of
these three points, the corresponding handler can be given as "NULL". Each handler is
called with arg as the argument.
The order of calls to pth_atfork_push(3) is significant. The parent and child handlers
are called in the order in which they were established by calls to pth_atfork_push(3),
i.e., FIFO. The prepare fork handlers are called in the opposite order, i.e., LIFO.
int pth_atfork_pop(void);
This removes the top-most handlers on the forking handler stack which were established
with the last pth_atfork_push(3) call. It returns "FALSE" when no more handlers
couldn't be removed from the stack.
pid_t pth_fork(void);
This is a variant of fork(2) with the difference that the current thread only is
forked into a separate process, i.e., in the parent process nothing changes while in
the child process all threads are gone except for the scheduler and the calling
thread. When you really want to duplicate all threads in the current process you
should use fork(2) directly. But this is usually not reasonable. Additionally this
function takes care of forking handlers as established by pth_fork_push(3).
Synchronization
The following functions provide synchronization support via mutual exclusion locks
(mutex), read-write locks (rwlock), condition variables (cond) and barriers (barrier).
Keep in mind that in a non-preemptive threading system like Pth this might sound
unnecessary at the first look, because a thread isn't interrupted by the system. Actually
when you have a critical code section which doesn't contain any pth_xxx() functions, you
don't need any mutex to protect it, of course.
But when your critical code section contains any pth_xxx() function the chance is high
that these temporarily switch to the scheduler. And this way other threads can make
progress and enter your critical code section, too. This is especially true for critical
code sections which implicitly or explicitly use the event mechanism.
int pth_mutex_init(pth_mutex_t *mutex);
This dynamically initializes a mutex variable of type `"pth_mutex_t"'. Alternatively
one can also use static initialization via `"pth_mutex_t mutex = PTH_MUTEX_INIT"'.
int pth_mutex_acquire(pth_mutex_t *mutex, int try, pth_event_t ev);
This acquires a mutex mutex. If the mutex is already locked by another thread, the
current threads execution is suspended until the mutex is unlocked again or
additionally the extra events in ev occurred (when ev is not "NULL"). Recursive
locking is explicitly supported, i.e., a thread is allowed to acquire a mutex more
than once before its released. But it then also has be released the same number of
times until the mutex is again lockable by others. When try is "TRUE" this function
never suspends execution. Instead it returns "FALSE" with "errno" set to "EBUSY".
int pth_mutex_release(pth_mutex_t *mutex);
This decrements the recursion locking count on mutex and when it is zero it releases
the mutex mutex.
int pth_rwlock_init(pth_rwlock_t *rwlock);
This dynamically initializes a read-write lock variable of type `"pth_rwlock_t"'.
Alternatively one can also use static initialization via `"pth_rwlock_t rwlock =
PTH_RWLOCK_INIT"'.
int pth_rwlock_acquire(pth_rwlock_t *rwlock, int op, int try, pth_event_t ev);
This acquires a read-only (when op is "PTH_RWLOCK_RD") or a read-write (when op is
"PTH_RWLOCK_RW") lock rwlock. When the lock is only locked by other threads in read-
only mode, the lock succeeds. But when one thread holds a read-write lock, all
locking attempts suspend the current thread until this lock is released again.
Additionally in ev events can be given to let the locking timeout, etc. When try is
"TRUE" this function never suspends execution. Instead it returns "FALSE" with "errno"
set to "EBUSY".
int pth_rwlock_release(pth_rwlock_t *rwlock);
This releases a previously acquired (read-only or read-write) lock.
int pth_cond_init(pth_cond_t *cond);
This dynamically initializes a condition variable variable of type `"pth_cond_t"'.
Alternatively one can also use static initialization via `"pth_cond_t cond =
PTH_COND_INIT"'.
int pth_cond_await(pth_cond_t *cond, pth_mutex_t *mutex, pth_event_t ev);
This awaits a condition situation. The caller has to follow the semantics of the POSIX
condition variables: mutex has to be acquired before this function is called. The
execution of the current thread is then suspended either until the events in ev
occurred (when ev is not "NULL") or cond was notified by another thread via
pth_cond_notify(3). While the thread is waiting, mutex is released. Before it returns
mutex is reacquired.
int pth_cond_notify(pth_cond_t *cond, int broadcast);
This notified one or all threads which are waiting on cond. When broadcast is "TRUE"
all thread are notified, else only a single (unspecified) one.
int pth_barrier_init(pth_barrier_t *barrier, int threshold);
This dynamically initializes a barrier variable of type `"pth_barrier_t"'.
Alternatively one can also use static initialization via `"pth_barrier_t barrier =
PTH_BARRIER_INIT("threadhold")"'.
int pth_barrier_reach(pth_barrier_t *barrier);
This function reaches a barrier barrier. If this is the last thread (as specified by
threshold on init of barrier) all threads are awakened. Else the current thread is
suspended until the last thread reached the barrier and this way awakes all threads.
The function returns (beside "FALSE" on error) the value "TRUE" for any thread which
neither reached the barrier as the first nor the last thread; "PTH_BARRIER_HEADLIGHT"
for the thread which reached the barrier as the first thread and
"PTH_BARRIER_TAILLIGHT" for the thread which reached the barrier as the last thread.
User-Space Context
The following functions provide a stand-alone sub-API for user-space context switching. It
internally is based on the same underlying machine context switching mechanism the threads
in GNU Pth are based on. Hence these functions you can use for implementing your own
simple user-space threads. The "pth_uctx_t" context is somewhat modeled after POSIX
ucontext(3).
The time required to create (via pth_uctx_make(3)) a user-space context can range from
just a few microseconds up to a more dramatical time (depending on the machine context
switching method which is available on the platform). On the other hand, the raw
performance in switching the user-space contexts is always very good (nearly independent
of the used machine context switching method). For instance, on an Intel Pentium-III CPU
with 800Mhz running under FreeBSD 4 one usually achieves about 260,000 user-space context
switches (via pth_uctx_switch(3)) per second.
int pth_uctx_create(pth_uctx_t *uctx);
This function creates a user-space context and stores it into uctx. There is still no
underlying user-space context configured. You still have to do this with
pth_uctx_make(3). On success, this function returns "TRUE", else "FALSE".
int pth_uctx_make(pth_uctx_t uctx, char *sk_addr, size_t sk_size, const sigset_t *sigmask,
void (*start_func)(void *), void *start_arg, pth_uctx_t uctx_after);
This function makes a new user-space context in uctx which will operate on the run-
time stack sk_addr (which is of maximum size sk_size), with the signals in sigmask
blocked (if sigmask is not "NULL") and starting to execute with the call
start_func(start_arg). If sk_addr is "NULL", a stack is dynamically allocated. The
stack size sk_size has to be at least 16384 (16KB). If the start function start_func
returns and uctx_after is not "NULL", an implicit user-space context switch to this
context is performed. Else (if uctx_after is "NULL") the process is terminated with
exit(3). This function is somewhat modeled after POSIX makecontext(3). On success,
this function returns "TRUE", else "FALSE".
int pth_uctx_switch(pth_uctx_t uctx_from, pth_uctx_t uctx_to);
This function saves the current user-space context in uctx_from for later restoring by
another call to pth_uctx_switch(3) and restores the new user-space context from
uctx_to, which previously had to be set with either a previous call to
pth_uctx_switch(3) or initially by pth_uctx_make(3). This function is somewhat modeled
after POSIX swapcontext(3). If uctx_from or uctx_to are "NULL" or if uctx_to contains
no valid user-space context, "FALSE" is returned instead of "TRUE". These are the only
errors possible.
int pth_uctx_destroy(pth_uctx_t uctx);
This function destroys the user-space context in uctx. The run-time stack associated
with the user-space context is deallocated only if it was not given by the application
(see sk_addr of pth_uctx_create(3)). If uctx is "NULL", "FALSE" is returned instead
of "TRUE". This is the only error possible.
Generalized POSIX Replacement API
The following functions are generalized replacements functions for the POSIX API, i.e.,
they are similar to the functions under `Standard POSIX Replacement API' but all have an
additional event argument which can be used for timeouts, etc.
int pth_sigwait_ev(const sigset_t *set, int *sig, pth_event_t ev);
This is equal to pth_sigwait(3) (see below), but has an additional event argument ev.
When pth_sigwait(3) suspends the current threads execution it usually only uses the
signal event on set to awake. With this function any number of extra events can be
used to awake the current thread (remember that ev actually is an event ring).
int pth_connect_ev(int s, const struct sockaddr *addr, socklen_t addrlen, pth_event_t ev);
This is equal to pth_connect(3) (see below), but has an additional event argument ev.
When pth_connect(3) suspends the current threads execution it usually only uses the
I/O event on s to awake. With this function any number of extra events can be used to
awake the current thread (remember that ev actually is an event ring).
int pth_accept_ev(int s, struct sockaddr *addr, socklen_t *addrlen, pth_event_t ev);
This is equal to pth_accept(3) (see below), but has an additional event argument ev.
When pth_accept(3) suspends the current threads execution it usually only uses the I/O
event on s to awake. With this function any number of extra events can be used to
awake the current thread (remember that ev actually is an event ring).
int pth_select_ev(int nfd, fd_set *rfds, fd_set *wfds, fd_set *efds, struct timeval
*timeout, pth_event_t ev);
This is equal to pth_select(3) (see below), but has an additional event argument ev.
When pth_select(3) suspends the current threads execution it usually only uses the I/O
event on rfds, wfds and efds to awake. With this function any number of extra events
can be used to awake the current thread (remember that ev actually is an event ring).
int pth_poll_ev(struct pollfd *fds, unsigned int nfd, int timeout, pth_event_t ev);
This is equal to pth_poll(3) (see below), but has an additional event argument ev.
When pth_poll(3) suspends the current threads execution it usually only uses the I/O
event on fds to awake. With this function any number of extra events can be used to
awake the current thread (remember that ev actually is an event ring).
ssize_t pth_read_ev(int fd, void *buf, size_t nbytes, pth_event_t ev);
This is equal to pth_read(3) (see below), but has an additional event argument ev.
When pth_read(3) suspends the current threads execution it usually only uses the I/O
event on fd to awake. With this function any number of extra events can be used to
awake the current thread (remember that ev actually is an event ring).
ssize_t pth_readv_ev(int fd, const struct iovec *iovec, int iovcnt, pth_event_t ev);
This is equal to pth_readv(3) (see below), but has an additional event argument ev.
When pth_readv(3) suspends the current threads execution it usually only uses the I/O
event on fd to awake. With this function any number of extra events can be used to
awake the current thread (remember that ev actually is an event ring).
ssize_t pth_write_ev(int fd, const void *buf, size_t nbytes, pth_event_t ev);
This is equal to pth_write(3) (see below), but has an additional event argument ev.
When pth_write(3) suspends the current threads execution it usually only uses the I/O
event on fd to awake. With this function any number of extra events can be used to
awake the current thread (remember that ev actually is an event ring).
ssize_t pth_writev_ev(int fd, const struct iovec *iovec, int iovcnt, pth_event_t ev);
This is equal to pth_writev(3) (see below), but has an additional event argument ev.
When pth_writev(3) suspends the current threads execution it usually only uses the I/O
event on fd to awake. With this function any number of extra events can be used to
awake the current thread (remember that ev actually is an event ring).
ssize_t pth_recv_ev(int fd, void *buf, size_t nbytes, int flags, pth_event_t ev);
This is equal to pth_recv(3) (see below), but has an additional event argument ev.
When pth_recv(3) suspends the current threads execution it usually only uses the I/O
event on fd to awake. With this function any number of extra events can be used to
awake the current thread (remember that ev actually is an event ring).
ssize_t pth_recvfrom_ev(int fd, void *buf, size_t nbytes, int flags, struct sockaddr
*from, socklen_t *fromlen, pth_event_t ev);
This is equal to pth_recvfrom(3) (see below), but has an additional event argument ev.
When pth_recvfrom(3) suspends the current threads execution it usually only uses the
I/O event on fd to awake. With this function any number of extra events can be used to
awake the current thread (remember that ev actually is an event ring).
ssize_t pth_send_ev(int fd, const void *buf, size_t nbytes, int flags, pth_event_t ev);
This is equal to pth_send(3) (see below), but has an additional event argument ev.
When pth_send(3) suspends the current threads execution it usually only uses the I/O
event on fd to awake. With this function any number of extra events can be used to
awake the current thread (remember that ev actually is an event ring).
ssize_t pth_sendto_ev(int fd, const void *buf, size_t nbytes, int flags, const struct
sockaddr *to, socklen_t tolen, pth_event_t ev);
This is equal to pth_sendto(3) (see below), but has an additional event argument ev.
When pth_sendto(3) suspends the current threads execution it usually only uses the I/O
event on fd to awake. With this function any number of extra events can be used to
awake the current thread (remember that ev actually is an event ring).
Standard POSIX Replacement API
The following functions are standard replacements functions for the POSIX API. The
difference is mainly that they suspend the current thread only instead of the whole
process in case the file descriptors will block.
int pth_nanosleep(const struct timespec *rqtp, struct timespec *rmtp);
This is a variant of the POSIX nanosleep(3) function. It suspends the current threads
execution until the amount of time in rqtp elapsed. The thread is guaranteed to not
wake up before this time, but because of the non-preemptive scheduling nature of Pth,
it can be awakened later, of course. If rmtp is not "NULL", the "timespec" structure
it references is updated to contain the unslept amount (the request time minus the
time actually slept time). The difference between nanosleep(3) and pth_nanosleep(3) is
that that pth_nanosleep(3) suspends only the execution of the current thread and not
the whole process.
int pth_usleep(unsigned int usec);
This is a variant of the 4.3BSD usleep(3) function. It suspends the current threads
execution until usec microseconds (= usec*1/1000000 sec) elapsed. The thread is
guaranteed to not wake up before this time, but because of the non-preemptive
scheduling nature of Pth, it can be awakened later, of course. The difference between
usleep(3) and pth_usleep(3) is that that pth_usleep(3) suspends only the execution of
the current thread and not the whole process.
unsigned int pth_sleep(unsigned int sec);
This is a variant of the POSIX sleep(3) function. It suspends the current threads
execution until sec seconds elapsed. The thread is guaranteed to not wake up before
this time, but because of the non-preemptive scheduling nature of Pth, it can be
awakened later, of course. The difference between sleep(3) and pth_sleep(3) is that
pth_sleep(3) suspends only the execution of the current thread and not the whole
process.
pid_t pth_waitpid(pid_t pid, int *status, int options);
This is a variant of the POSIX waitpid(2) function. It suspends the current threads
execution until status information is available for a terminated child process pid.
The difference between waitpid(2) and pth_waitpid(3) is that pth_waitpid(3) suspends
only the execution of the current thread and not the whole process. For more details
about the arguments and return code semantics see waitpid(2).
int pth_system(const char *cmd);
This is a variant of the POSIX system(3) function. It executes the shell command cmd
with Bourne Shell ("sh") and suspends the current threads execution until this command
terminates. The difference between system(3) and pth_system(3) is that pth_system(3)
suspends only the execution of the current thread and not the whole process. For more
details about the arguments and return code semantics see system(3).
int pth_sigmask(int how, const sigset_t *set, sigset_t *oset)
This is the Pth thread-related equivalent of POSIX sigprocmask(2) respectively
pthread_sigmask(3). The arguments how, set and oset directly relate to sigprocmask(2),
because Pth internally just uses sigprocmask(2) here. So alternatively you can also
directly call sigprocmask(2), but for consistency reasons you should use this function
pth_sigmask(3).
int pth_sigwait(const sigset_t *set, int *sig);
This is a variant of the POSIX.1c sigwait(3) function. It suspends the current threads
execution until a signal in set occurred and stores the signal number in sig. The
important point is that the signal is not delivered to a signal handler. Instead it's
caught by the scheduler only in order to awake the pth_sigwait() call. The trick and
noticeable point here is that this way you get an asynchronous aware application that
is written completely synchronously. When you think about the problem of asynchronous
safe functions you should recognize that this is a great benefit.
int pth_connect(int s, const struct sockaddr *addr, socklen_t addrlen);
This is a variant of the 4.2BSD connect(2) function. It establishes a connection on a
socket s to target specified in addr and addrlen. The difference between connect(2)
and pth_connect(3) is that pth_connect(3) suspends only the execution of the current
thread and not the whole process. For more details about the arguments and return
code semantics see connect(2).
int pth_accept(int s, struct sockaddr *addr, socklen_t *addrlen);
This is a variant of the 4.2BSD accept(2) function. It accepts a connection on a
socket by extracting the first connection request on the queue of pending connections,
creating a new socket with the same properties of s and allocates a new file
descriptor for the socket (which is returned). The difference between accept(2) and
pth_accept(3) is that pth_accept(3) suspends only the execution of the current thread
and not the whole process. For more details about the arguments and return code
semantics see accept(2).
int pth_select(int nfd, fd_set *rfds, fd_set *wfds, fd_set *efds, struct timeval
*timeout);
This is a variant of the 4.2BSD select(2) function. It examines the I/O descriptor
sets whose addresses are passed in rfds, wfds, and efds to see if some of their
descriptors are ready for reading, are ready for writing, or have an exceptional
condition pending, respectively. For more details about the arguments and return code
semantics see select(2).
int pth_pselect(int nfd, fd_set *rfds, fd_set *wfds, fd_set *efds, const struct timespec
*timeout, const sigset_t *sigmask);
This is a variant of the POSIX pselect(2) function, which in turn is a stronger
variant of 4.2BSD select(2). The difference is that the higher-resolution "struct
timespec" is passed instead of the lower-resolution "struct timeval" and that a signal
mask is specified which is temporarily set while waiting for input. For more details
about the arguments and return code semantics see pselect(2) and select(2).
int pth_poll(struct pollfd *fds, unsigned int nfd, int timeout);
This is a variant of the SysV poll(2) function. It examines the I/O descriptors which
are passed in the array fds to see if some of them are ready for reading, are ready
for writing, or have an exceptional condition pending, respectively. For more details
about the arguments and return code semantics see poll(2).
ssize_t pth_read(int fd, void *buf, size_t nbytes);
This is a variant of the POSIX read(2) function. It reads up to nbytes bytes into buf
from file descriptor fd. The difference between read(2) and pth_read(2) is that
pth_read(2) suspends execution of the current thread until the file descriptor is
ready for reading. For more details about the arguments and return code semantics see
read(2).
ssize_t pth_readv(int fd, const struct iovec *iovec, int iovcnt);
This is a variant of the POSIX readv(2) function. It reads data from file descriptor
fd into the first iovcnt rows of the iov vector. The difference between readv(2) and
pth_readv(2) is that pth_readv(2) suspends execution of the current thread until the
file descriptor is ready for reading. For more details about the arguments and return
code semantics see readv(2).
ssize_t pth_write(int fd, const void *buf, size_t nbytes);
This is a variant of the POSIX write(2) function. It writes nbytes bytes from buf to
file descriptor fd. The difference between write(2) and pth_write(2) is that
pth_write(2) suspends execution of the current thread until the file descriptor is
ready for writing. For more details about the arguments and return code semantics see
write(2).
ssize_t pth_writev(int fd, const struct iovec *iovec, int iovcnt);
This is a variant of the POSIX writev(2) function. It writes data to file descriptor
fd from the first iovcnt rows of the iov vector. The difference between writev(2) and
pth_writev(2) is that pth_writev(2) suspends execution of the current thread until the
file descriptor is ready for reading. For more details about the arguments and return
code semantics see writev(2).
ssize_t pth_pread(int fd, void *buf, size_t nbytes, off_t offset);
This is a variant of the POSIX pread(3) function. It performs the same action as a
regular read(2), except that it reads from a given position in the file without
changing the file pointer. The first three arguments are the same as for pth_read(3)
with the addition of a fourth argument offset for the desired position inside the
file.
ssize_t pth_pwrite(int fd, const void *buf, size_t nbytes, off_t offset);
This is a variant of the POSIX pwrite(3) function. It performs the same action as a
regular write(2), except that it writes to a given position in the file without
changing the file pointer. The first three arguments are the same as for pth_write(3)
with the addition of a fourth argument offset for the desired position inside the
file.
ssize_t pth_recv(int fd, void *buf, size_t nbytes, int flags);
This is a variant of the SUSv2 recv(2) function and equal to ``pth_recvfrom(fd, buf,
nbytes, flags, NULL, 0)''.
ssize_t pth_recvfrom(int fd, void *buf, size_t nbytes, int flags, struct sockaddr *from,
socklen_t *fromlen);
This is a variant of the SUSv2 recvfrom(2) function. It reads up to nbytes bytes into
buf from file descriptor fd while using flags and from/fromlen. The difference between
recvfrom(2) and pth_recvfrom(2) is that pth_recvfrom(2) suspends execution of the
current thread until the file descriptor is ready for reading. For more details about
the arguments and return code semantics see recvfrom(2).
ssize_t pth_send(int fd, const void *buf, size_t nbytes, int flags);
This is a variant of the SUSv2 send(2) function and equal to ``pth_sendto(fd, buf,
nbytes, flags, NULL, 0)''.
ssize_t pth_sendto(int fd, const void *buf, size_t nbytes, int flags, const struct
sockaddr *to, socklen_t tolen);
This is a variant of the SUSv2 sendto(2) function. It writes nbytes bytes from buf to
file descriptor fd while using flags and to/tolen. The difference between sendto(2)
and pth_sendto(2) is that pth_sendto(2) suspends execution of the current thread until
the file descriptor is ready for writing. For more details about the arguments and
return code semantics see sendto(2).
EXAMPLE
The following example is a useless server which does nothing more than listening on TCP
port 12345 and displaying the current time to the socket when a connection was
established. For each incoming connection a thread is spawned. Additionally, to see more
multithreading, a useless ticker thread runs simultaneously which outputs the current time
to "stderr" every 5 seconds. The example contains no error checking and is only intended
to show you the look and feel of Pth.
#include <stdio.h>
#include <stdlib.h>
#include <errno.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <netinet/in.h>
#include <arpa/inet.h>
#include <signal.h>
#include <netdb.h>
#include <unistd.h>
#include "pth.h"
#define PORT 12345
/* the socket connection handler thread */
static void *handler(void *_arg)
{
int fd = (int)_arg;
time_t now;
char *ct;
now = time(NULL);
ct = ctime(&now);
pth_write(fd, ct, strlen(ct));
close(fd);
return NULL;
}
/* the stderr time ticker thread */
static void *ticker(void *_arg)
{
time_t now;
char *ct;
float load;
for (;;) {
pth_sleep(5);
now = time(NULL);
ct = ctime(&now);
ct[strlen(ct)-1] = '\0';
pth_ctrl(PTH_CTRL_GETAVLOAD, &load);
printf("ticker: time: %s, average load: %.2f\n", ct, load);
}
}
/* the main thread/procedure */
int main(int argc, char *argv[])
{
pth_attr_t attr;
struct sockaddr_in sar;
struct protoent *pe;
struct sockaddr_in peer_addr;
int peer_len;
int sa, sw;
int port;
pth_init();
signal(SIGPIPE, SIG_IGN);
attr = pth_attr_new();
pth_attr_set(attr, PTH_ATTR_NAME, "ticker");
pth_attr_set(attr, PTH_ATTR_STACK_SIZE, 64*1024);
pth_attr_set(attr, PTH_ATTR_JOINABLE, FALSE);
pth_spawn(attr, ticker, NULL);
pe = getprotobyname("tcp");
sa = socket(AF_INET, SOCK_STREAM, pe->p_proto);
sar.sin_family = AF_INET;
sar.sin_addr.s_addr = INADDR_ANY;
sar.sin_port = htons(PORT);
bind(sa, (struct sockaddr *)&sar, sizeof(struct sockaddr_in));
listen(sa, 10);
pth_attr_set(attr, PTH_ATTR_NAME, "handler");
for (;;) {
peer_len = sizeof(peer_addr);
sw = pth_accept(sa, (struct sockaddr *)&peer_addr, &peer_len);
pth_spawn(attr, handler, (void *)sw);
}
}
BUILD ENVIRONMENTS
In this section we will discuss the canonical ways to establish the build environment for
a Pth based program. The possibilities supported by Pth range from very simple
environments to rather complex ones.
Manual Build Environment (Novice)
As a first example, assume we have the above test program staying in the source file
"foo.c". Then we can create a very simple build environment by just adding the following
"Makefile":
$ vi Makefile
⎪ CC = cc
⎪ CFLAGS = `pth-config --cflags`
⎪ LDFLAGS = `pth-config --ldflags`
⎪ LIBS = `pth-config --libs`
⎪
⎪ all: foo
⎪ foo: foo.o
⎪ $(CC) $(LDFLAGS) -o foo foo.o $(LIBS)
⎪ foo.o: foo.c
⎪ $(CC) $(CFLAGS) -c foo.c
⎪ clean:
⎪ rm -f foo foo.o
This imports the necessary compiler and linker flags on-the-fly from the Pth installation
via its "pth-config" program. This approach is straight-forward and works fine for small
projects.
Autoconf Build Environment (Advanced)
The previous approach is simple but inflexible. First, to speed up building, it would be
nice to not expand the compiler and linker flags every time the compiler is started.
Second, it would be useful to also be able to build against uninstalled Pth, that is,
against a Pth source tree which was just configured and built, but not installed. Third,
it would be also useful to allow checking of the Pth version to make sure it is at least a
minimum required version. And finally, it would be also great to make sure Pth works
correctly by first performing some sanity compile and run-time checks. All this can be
done if we use GNU autoconf and the "AC_CHECK_PTH" macro provided by Pth. For this, we
establish the following three files:
First we again need the "Makefile", but this time it contains autoconf placeholders and
additional cleanup targets. And we create it under the name "Makefile.in", because it is
now an input file for autoconf:
$ vi Makefile.in
⎪ CC = @CC@
⎪ CFLAGS = @CFLAGS@
⎪ LDFLAGS = @LDFLAGS@
⎪ LIBS = @LIBS@
⎪
⎪ all: foo
⎪ foo: foo.o
⎪ $(CC) $(LDFLAGS) -o foo foo.o $(LIBS)
⎪ foo.o: foo.c
⎪ $(CC) $(CFLAGS) -c foo.c
⎪ clean:
⎪ rm -f foo foo.o
⎪ distclean:
⎪ rm -f foo foo.o
⎪ rm -f config.log config.status config.cache
⎪ rm -f Makefile
Because autoconf generates additional files, we added a canonical "distclean" target which
cleans this up. Secondly, we wrote "configure.ac", a (minimal) autoconf script
specification:
$ vi configure.ac
⎪ AC_INIT(Makefile.in)
⎪ AC_CHECK_PTH(1.3.0)
⎪ AC_OUTPUT(Makefile)
Then we let autoconf's "aclocal" program generate for us an "aclocal.m4" file containing
Pth's "AC_CHECK_PTH" macro. Then we generate the final "configure" script out of this
"aclocal.m4" file and the "configure.ac" file:
$ aclocal --acdir=`pth-config --acdir`
$ autoconf
After these steps, the working directory should look similar to this:
$ ls -l
-rw-r--r-- 1 rse users 176 Nov 3 11:11 Makefile.in
-rw-r--r-- 1 rse users 15314 Nov 3 11:16 aclocal.m4
-rwxr-xr-x 1 rse users 52045 Nov 3 11:16 configure
-rw-r--r-- 1 rse users 63 Nov 3 11:11 configure.ac
-rw-r--r-- 1 rse users 4227 Nov 3 11:11 foo.c
If we now run "configure" we get a correct "Makefile" which immediately can be used to
build "foo" (assuming that Pth is already installed somewhere, so that "pth-config" is in
$PATH):
$ ./configure
creating cache ./config.cache
checking for gcc... gcc
checking whether the C compiler (gcc ) works... yes
checking whether the C compiler (gcc ) is a cross-compiler... no
checking whether we are using GNU C... yes
checking whether gcc accepts -g... yes
checking how to run the C preprocessor... gcc -E
checking for GNU Pth... version 1.3.0, installed under /usr/local
updating cache ./config.cache
creating ./config.status
creating Makefile
rse@en1:/e/gnu/pth/ac
$ make
gcc -g -O2 -I/usr/local/include -c foo.c
gcc -L/usr/local/lib -o foo foo.o -lpth
If Pth is installed in non-standard locations or "pth-config" is not in $PATH, one just
has to drop the "configure" script a note about the location by running "configure" with
the option "--with-pth="dir (where dir is the argument which was used with the "--prefix"
option when Pth was installed).
Autoconf Build Environment with Local Copy of Pth (Expert)
Finally let us assume the "foo" program stays under either a GPL or LGPL distribution
license and we want to make it a stand-alone package for easier distribution and
installation. That is, we don't want to oblige the end-user to install Pth just to allow
our "foo" package to compile. For this, it is a convenient practice to include the
required libraries (here Pth) into the source tree of the package (here "foo"). Pth ships
with all necessary support to allow us to easily achieve this approach. Say, we want Pth
in a subdirectory named "pth/" and this directory should be seamlessly integrated into the
configuration and build process of "foo".
First we again start with the "Makefile.in", but this time it is a more advanced version
which supports subdirectory movement:
$ vi Makefile.in
⎪ CC = @CC@
⎪ CFLAGS = @CFLAGS@
⎪ LDFLAGS = @LDFLAGS@
⎪ LIBS = @LIBS@
⎪
⎪ SUBDIRS = pth
⎪
⎪ all: subdirs_all foo
⎪
⎪ subdirs_all:
⎪ @$(MAKE) $(MFLAGS) subdirs TARGET=all
⎪ subdirs_clean:
⎪ @$(MAKE) $(MFLAGS) subdirs TARGET=clean
⎪ subdirs_distclean:
⎪ @$(MAKE) $(MFLAGS) subdirs TARGET=distclean
⎪ subdirs:
⎪ @for subdir in $(SUBDIRS); do \
⎪ echo "===> $$subdir ($(TARGET))"; \
⎪ (cd $$subdir; $(MAKE) $(MFLAGS) $(TARGET) ⎪⎪ exit 1) ⎪⎪ exit 1; \
⎪ echo "<=== $$subdir"; \
⎪ done
⎪
⎪ foo: foo.o
⎪ $(CC) $(LDFLAGS) -o foo foo.o $(LIBS)
⎪ foo.o: foo.c
⎪ $(CC) $(CFLAGS) -c foo.c
⎪
⎪ clean: subdirs_clean
⎪ rm -f foo foo.o
⎪ distclean: subdirs_distclean
⎪ rm -f foo foo.o
⎪ rm -f config.log config.status config.cache
⎪ rm -f Makefile
Then we create a slightly different autoconf script "configure.ac":
$ vi configure.ac
⎪ AC_INIT(Makefile.in)
⎪ AC_CONFIG_AUX_DIR(pth)
⎪ AC_CHECK_PTH(1.3.0, subdir:pth --disable-tests)
⎪ AC_CONFIG_SUBDIRS(pth)
⎪ AC_OUTPUT(Makefile)
Here we provided a default value for "foo"'s "--with-pth" option as the second argument to
"AC_CHECK_PTH" which indicates that Pth can be found in the subdirectory named "pth/".
Additionally we specified that the "--disable-tests" option of Pth should be passed to the
"pth/" subdirectory, because we need only to build the Pth library itself. And we added a
"AC_CONFIG_SUBDIR" call which indicates to autoconf that it should configure the "pth/"
subdirectory, too. The "AC_CONFIG_AUX_DIR" directive was added just to make autoconf
happy, because it wants to find a "install.sh" or "shtool" script if "AC_CONFIG_SUBDIRS"
is used.
Now we let autoconf's "aclocal" program again generate for us an "aclocal.m4" file with
the contents of Pth's "AC_CHECK_PTH" macro. Finally we generate the "configure" script
out of this "aclocal.m4" file and the "configure.ac" file.
$ aclocal --acdir=`pth-config --acdir`
$ autoconf
Now we have to create the "pth/" subdirectory itself. For this, we extract the Pth
distribution to the "foo" source tree and just rename it to "pth/":
$ gunzip <pth-X.Y.Z.tar.gz ⎪ tar xvf -
$ mv pth-X.Y.Z pth
Optionally to reduce the size of the "pth/" subdirectory, we can strip down the Pth
sources to a minimum with the striptease feature:
$ cd pth
$ ./configure
$ make striptease
$ cd ..
After this the source tree of "foo" should look similar to this:
$ ls -l
-rw-r--r-- 1 rse users 709 Nov 3 11:51 Makefile.in
-rw-r--r-- 1 rse users 16431 Nov 3 12:20 aclocal.m4
-rwxr-xr-x 1 rse users 57403 Nov 3 12:21 configure
-rw-r--r-- 1 rse users 129 Nov 3 12:21 configure.ac
-rw-r--r-- 1 rse users 4227 Nov 3 11:11 foo.c
drwxr-xr-x 2 rse users 3584 Nov 3 12:36 pth
$ ls -l pth/
-rw-rw-r-- 1 rse users 26344 Nov 1 20:12 COPYING
-rw-rw-r-- 1 rse users 2042 Nov 3 12:36 Makefile.in
-rw-rw-r-- 1 rse users 3967 Nov 1 19:48 README
-rw-rw-r-- 1 rse users 340 Nov 3 12:36 README.1st
-rw-rw-r-- 1 rse users 28719 Oct 31 17:06 config.guess
-rw-rw-r-- 1 rse users 24274 Aug 18 13:31 config.sub
-rwxrwxr-x 1 rse users 155141 Nov 3 12:36 configure
-rw-rw-r-- 1 rse users 162021 Nov 3 12:36 pth.c
-rw-rw-r-- 1 rse users 18687 Nov 2 15:19 pth.h.in
-rw-rw-r-- 1 rse users 5251 Oct 31 12:46 pth_acdef.h.in
-rw-rw-r-- 1 rse users 2120 Nov 1 11:27 pth_acmac.h.in
-rw-rw-r-- 1 rse users 2323 Nov 1 11:27 pth_p.h.in
-rw-rw-r-- 1 rse users 946 Nov 1 11:27 pth_vers.c
-rw-rw-r-- 1 rse users 26848 Nov 1 11:27 pthread.c
-rw-rw-r-- 1 rse users 18772 Nov 1 11:27 pthread.h.in
-rwxrwxr-x 1 rse users 26188 Nov 3 12:36 shtool
Now when we configure and build the "foo" package it looks similar to this:
$ ./configure
creating cache ./config.cache
checking for gcc... gcc
checking whether the C compiler (gcc ) works... yes
checking whether the C compiler (gcc ) is a cross-compiler... no
checking whether we are using GNU C... yes
checking whether gcc accepts -g... yes
checking how to run the C preprocessor... gcc -E
checking for GNU Pth... version 1.3.0, local under pth
updating cache ./config.cache
creating ./config.status
creating Makefile
configuring in pth
running /bin/sh ./configure --enable-subdir --enable-batch
--disable-tests --cache-file=.././config.cache --srcdir=.
loading cache .././config.cache
checking for gcc... (cached) gcc
checking whether the C compiler (gcc ) works... yes
checking whether the C compiler (gcc ) is a cross-compiler... no
[...]
$ make
===> pth (all)
./shtool scpp -o pth_p.h -t pth_p.h.in -Dcpp -Cintern -M '==#==' pth.c
pth_vers.c
gcc -c -I. -O2 -pipe pth.c
gcc -c -I. -O2 -pipe pth_vers.c
ar rc libpth.a pth.o pth_vers.o
ranlib libpth.a
<=== pth
gcc -g -O2 -Ipth -c foo.c
gcc -Lpth -o foo foo.o -lpth
As you can see, autoconf now automatically configures the local (stripped down) copy of
Pth in the subdirectory "pth/" and the "Makefile" automatically builds the subdirectory,
too.
SYSTEM CALL WRAPPER FACILITY
Pth per default uses an explicit API, including the system calls. For instance you've to
explicitly use pth_read(3) when you need a thread-aware read(3) and cannot expect that by
just calling read(3) only the current thread is blocked. Instead with the standard read(3)
call the whole process will be blocked. But because for some applications (mainly those
consisting of lots of third-party stuff) this can be inconvenient. Here it's required
that a call to read(3) `magically' means pth_read(3). The problem here is that such magic
Pth cannot provide per default because it's not really portable. Nevertheless Pth
provides a two step approach to solve this problem:
Soft System Call Mapping
This variant is available on all platforms and can always be enabled by building Pth with
"--enable-syscall-soft". This then triggers some "#define"'s in the "pth.h" header which
map for instance read(3) to pth_read(3), etc. Currently the following functions are
mapped: fork(2), nanosleep(3), usleep(3), sleep(3), sigwait(3), waitpid(2), system(3),
select(2), poll(2), connect(2), accept(2), read(2), write(2), recv(2), send(2),
recvfrom(2), sendto(2).
The drawback of this approach is just that really all source files of the application
where these function calls occur have to include "pth.h", of course. And this also means
that existing libraries, including the vendor's stdio, usually will still block the whole
process if one of its I/O functions block.
Hard System Call Mapping
This variant is available only on those platforms where the syscall(2) function exists and
there it can be enabled by building Pth with "--enable-syscall-hard". This then builds
wrapper functions (for instances read(3)) into the Pth library which internally call the
real Pth replacement functions (pth_read(3)). Currently the following functions are
mapped: fork(2), nanosleep(3), usleep(3), sleep(3), waitpid(2), system(3), select(2),
poll(2), connect(2), accept(2), read(2), write(2).
The drawback of this approach is that it depends on syscall(2) interface and prototype
conflicts can occur while building the wrapper functions due to different function
signatures in the vendor C header files. But the advantage of this mapping variant is
that the source files of the application where these function calls occur have not to
include "pth.h" and that existing libraries, including the vendor's stdio, magically
become thread-aware (and then block only the current thread).
IMPLEMENTATION NOTES
Pth is very portable because it has only one part which perhaps has to be ported to new
platforms (the machine context initialization). But it is written in a way which works on
mostly all Unix platforms which support makecontext(2) or at least sigstack(2) or
sigaltstack(2) [see "pth_mctx.c" for details]. Any other Pth code is POSIX and ANSI C
based only.
The context switching is done via either SUSv2 makecontext(2) or POSIX make[sig]setjmp(3)
and [sig]longjmp(3). Here all CPU registers, the program counter and the stack pointer are
switched. Additionally the Pth dispatcher switches also the global Unix "errno" variable
[see "pth_mctx.c" for details] and the signal mask (either implicitly via sigsetjmp(3) or
in an emulated way via explicit setprocmask(2) calls).
The Pth event manager is mainly select(2) and gettimeofday(2) based, i.e., the current
time is fetched via gettimeofday(2) once per context switch for time calculations and all
I/O events are implemented via a single central select(2) call [see "pth_sched.c" for
details].
The thread control block management is done via virtual priority queues without any
additional data structure overhead. For this, the queue linkage attributes are part of the
thread control blocks and the queues are actually implemented as rings with a selected
element as the entry point [see "pth_tcb.h" and "pth_pqueue.c" for details].
Most time critical code sections (especially the dispatcher and event manager) are speeded
up by inline functions (implemented as ANSI C pre-processor macros). Additionally any
debugging code is completely removed from the source when not built with "-DPTH_DEBUG"
(see Autoconf "--enable-debug" option), i.e., not only stub functions remain [see
"pth_debug.c" for details].
RESTRICTIONS
Pth (intentionally) provides no replacements for non-thread-safe functions (like strtok(3)
which uses a static internal buffer) or synchronous system functions (like
gethostbyname(3) which doesn't provide an asynchronous mode where it doesn't block). When
you want to use those functions in your server application together with threads, you've
to either link the application against special third-party libraries (or for
thread-safe/reentrant functions possibly against an existing "libc_r" of the platform
vendor). For an asynchronous DNS resolver library use the GNU adns package from Ian
Jackson ( see http://www.gnu.org/software/adns/adns.html ).
HISTORY
The Pth library was designed and implemented between February and July 1999 by Ralf S.
Engelschall after evaluating numerous (mostly preemptive) thread libraries and after
intensive discussions with Peter Simons, Martin Kraemer, Lars Eilebrecht and Ralph Babel
related to an experimental (matrix based) non-preemptive C++ scheduler class written by
Peter Simons.
Pth was then implemented in order to combine the non-preemptive approach of multithreading
(which provides better portability and performance) with an API similar to the popular one
found in Pthread libraries (which provides easy programming).
So the essential idea of the non-preemptive approach was taken over from Peter Simons
scheduler. The priority based scheduling algorithm was suggested by Martin Kraemer. Some
code inspiration also came from an experimental threading library (rsthreads) written by
Robert S. Thau for an ancient internal test version of the Apache webserver. The concept
and API of message ports was borrowed from AmigaOS' Exec subsystem. The concept and idea
for the flexible event mechanism came from Paul Vixie's eventlib (which can be found as a
part of BIND v8).
BUG REPORTS AND SUPPORT
If you think you have found a bug in Pth, you should send a report as complete as possible
to bug-pth@gnu.org. If you can, please try to fix the problem and include a patch, made
with '"diff -u3"', in your report. Always, at least, include a reasonable amount of
description in your report to allow the author to deterministically reproduce the bug.
For further support you additionally can subscribe to the pth-users@gnu.org mailing list
by sending an Email to pth-users-request@gnu.org with `"subscribe pth-users"' (or
`"subscribe pth-users" address' if you want to subscribe from a particular Email address)
in the body. Then you can discuss your issues with other Pth users by sending messages to
pth-users@gnu.org. Currently (as of August 2000) you can reach about 110 Pth users on this
mailing list. Old postings you can find at http://www.mail-archive.com/pth-users@gnu.org/.
SEE ALSO
Related Web Locations
`comp.programming.threads Newsgroup Archive', http://www.deja.com/topics_if.xp?
search=topic&group=comp.programming.threads
`comp.programming.threads Frequently Asked Questions (F.A.Q.)',
http://www.lambdacs.com/newsgroup/FAQ.html
`Multithreading - Definitions and Guidelines', Numeric Quest Inc 1998;
http://www.numeric-quest.com/lang/multi-frame.html
`The Single UNIX Specification, Version 2 - Threads', The Open Group 1997;
http://www.opengroup.org/onlinepubs /007908799/xsh/threads.html
SMI Thread Resources, Sun Microsystems Inc; http://www.sun.com/workshop/threads/
Bibliography on threads and multithreading, Torsten Amundsen;
http://liinwww.ira.uka.de/bibliography/Os/threads.html
Related Books
B. Nichols, D. Buttlar, J.P. Farrel: `Pthreads Programming - A POSIX Standard for Better
Multiprocessing', O'Reilly 1996; ISBN 1-56592-115-1
B. Lewis, D. J. Berg: `Multithreaded Programming with Pthreads', Sun Microsystems Press,
Prentice Hall 1998; ISBN 0-13-680729-1
B. Lewis, D. J. Berg: `Threads Primer - A Guide To Multithreaded Programming', Prentice
Hall 1996; ISBN 0-13-443698-9
S. J. Norton, M. D. Dipasquale: `Thread Time - The Multithreaded Programming Guide',
Prentice Hall 1997; ISBN 0-13-190067-6
D. R. Butenhof: `Programming with POSIX Threads', Addison Wesley 1997; ISBN 0-201-63392-2
Related Manpages
pth-config(1), pthread(3).
getcontext(2), setcontext(2), makecontext(2), swapcontext(2), sigstack(2), sigaltstack(2),
sigaction(2), sigemptyset(2), sigaddset(2), sigprocmask(2), sigsuspend(2), sigsetjmp(3),
siglongjmp(3), setjmp(3), longjmp(3), select(2), gettimeofday(2).
AUTHOR
Ralf S. Engelschall
rse@engelschall.com
www.engelschall.com