Ubuntu Manpage: accounting - Shorewall6 Accounting file

NAME

       accounting - Shorewall6 Accounting file

SYNOPSIS

       /etc/shorewall6/accounting

DESCRIPTION

Accounting rules exist simply to count packets and bytes in categories that you define in
this file. You may display these rules and their packet and byte counters using the
shorewall6 show accounting command.

Beginning with Shorewall 4.4.18, the accounting structure can be created with three root
chains:

• accountin: Rules that are valid in the INPUT chain (may not specify an output
interface).

• accountout: Rules that are valid in the OUTPUT chain (may not specify an input
interface or a MAC address).

• accounting: Other rules.

The new structure is enabled by sectioning the accounting file in a manner similar to the
rules file[1]. The sections are INPUT, OUTPUT and FORWARD and must appear in that order
(although any of them may be omitted). The first non-commentary record in the accounting
file must be a section header when sectioning is used.

Warning
If sections are not used, the Shorewall rules compiler cannot detect certain
violations of netfilter restrictions. These violations can result in run-time errors
such as the following:

ip6tables-restore v1.4.13: Can't use -o with INPUT

Beginning with Shorewall 4.4.20, the ACCOUNTING_TABLE setting was added to shorewall.conf
and shorewall6.conf. That setting determines the Netfilter table (filter or mangle) where
the accounting rules are added. When ACCOUNTING_TABLE=mangle is specified, the available
sections are PREROUTING, INPUT, OUTPUT, FORWARD and POSTROUTING.

Section headers have the form:

[?]SECTIONsection-name

The optional "?" was added in Shorewalll 4.6.0 and is preferred. Existing configurations
may be converted to use this form using the shorewall6 update command.

When sections are enabled:

• A jump to a user-defined accounting chain must appear before entries that add rules to
that chain. This eliminates loops and unreferenced chains.

• An output interface may not be specified in the PREROUTING and INPUT sections.

• In the OUTPUT and POSTROUTING sections:

• An input interface may not be specified

• Jumps to a chain defined in the INPUT or PREROUTING sections that specifies an
input interface are prohibited

• MAC addresses may not be used

• Jump to a chain defined in the INPUT or PREROUTING section that specifies a MAC
address are prohibited.

• The default value of the CHAIN column is:

• accountin in the INPUT section

• accountout in the OUTPUT section

• accountfwd in the FORWARD section

• accountpre in the PREROUTING section

• accountpost in the POSTROUTING section

• Traffic addressed to the firewall goes through the rules defined in the INPUT section.

• Traffic originating on the firewall goes through the rules defined in the OUTPUT
section.

• Traffic being forwarded through the firewall goes through the rules from the FORWARD
sections.

The columns in the file are as follows (where the column name is followed by a different
name in parentheses, the different name is used in the alternate specification syntax).

ACTION - {COUNT|DONE|chain[:{COUNT|JUMP}]|[?]COMMENT comment}
What to do when a matching packet is found.

COUNT
Simply count the match and continue with the next rule

DONE
Count the match and don't attempt to match any other accounting rules in the chain
specified in the CHAIN column.

chain[:COUNT]
Where chain is the name of a chain; shorewall6 will create the chain automatically
if it doesn't already exist. If a second chain is mentioned in the CHAIN column,
then a jump from this second chain to chain is created. If no chain is named in
the CHAIN column, then a jump from the default chain to chain is created. If
:COUNT is included, a counting rule matching this entry will be added to chain.
The chain may not exceed 29 characters in length and may be composed of letters,
digits, dash ('-') and underscore ('_').

chain:JUMP
Like the previous option without the :COUNT part.

INLINE
Added in Shorewall 4.5.16. Allows free form ip6tables matches to be specified
following a ';'. In the generated ip6tables rule(s), the free form matches will
follow any matches that are generated by the column contents.

NFACCT({object[!]}[,...])
Added in Shorewall 4.5.7. Provides a form of accounting that survives shorewall
stop/shorewall start and shorewall restart. Requires the NFaccnt Match capability
in your kernel and iptables. object names an nfacct object (see man nfaccnt(8)).
Multiple rules can specify the same object; all packets that match any of the
rules increment the packet and bytes count of the object.

Prior to Shorewall 4.5.16, only one object could be specified. Beginning with
Shorewall 4.5.16, an arbitrary number of objects may be given.

With Shorewall 4.5.16 or later, an nfacct object in the list may optionally be
followed by ! to indicate that the nfacct object will be incremented
unconditionally for each packet. When ! is omitted, the object will be
incremented only if all of the matches in the rule succeed.

NFLOG[(nflog-parameters)] - Added in Shorewall-4.4.20.
Causes each matching packet to be sent via the currently loaded logging back end
(usually nfnetlink_log) where it is available to accounting daemons through a
netlink socket.

?COMMENT
The remainder of the line is treated as a comment which is attached to subsequent
rules until another ?COMMENT line is found or until the end of the file is
reached. To stop adding comments to rules, use a line with only the word ?COMMENT.

CHAIN - {-|chain}
The name of a chain. If specified as - the accounting chain is assumed when the file
is un-sectioned. When the file is sectioned, the default is one of accountin,
accountout, etc. depending on the section. This is the chain where the accounting rule
is added. The chain will be created if it doesn't already exist. The chain may not
exceed 29 characters in length.

SOURCE - {-|any|all|interface|interface:[address]|address}
Packet Source.

The name of an interface, an address (host or net) or an interface name followed by
":" and a host or net address. An ipset name is also accepted as an address.

DEST - {-|any|all|interface|interface:[address]|address}
Packet Destination.

Format same as SOURCE column.

This column was formerly labelled DESTINATION.

PROTO - {-|any|all|protocol-name|protocol-number|ipp2p[:{udp|all}]}
A protocol-name (from protocols(5)), a protocol-number, ipp2p, ipp2p:udp or ipp2p:all

Beginning with Shorewall 4.5.12, this column can accept a comma-separated list of
protocols.

This column was formerly labelled PROTOCOL.

DPORT - {-|any|all|ipp2p-option|port-name-or-number[,port-name-or-number]...}
Destination Port number. Service name from services(5) or port number. May only be
specified if the protocol is TCP (6), UDP (17), DCCP (33), SCTP (132) or UDPLITE
(136).

You may place a comma-separated list of port names or numbers in this column if your
kernel and ip6tables include multi-port match support.

If the PROTOCOL is ipp2p then this column must contain an ipp2p-option ("ip6tables -m
ipp2p --help") without the leading "--". If no option is given in this column, ipp2p
is assumed.

This column was formerly labelled DEST PORT(S).

SPORT - {-|any|all|port-name-or-number[,port-name-or-number]...}
Service name from services(5) or port number. May only be specified if the protocol is
TCP (6), UDP (17), DCCP (33), SCTP (132) or UDPLITE (136).

You may place a comma-separated list of port numbers in this column if your kernel and
ip6tables include multi-port match support.

Beginning with Shorewall 4.5.15, you may place '=' in this column, provided that the
DPORT column is non-empty. This causes the rule to match when either the source port
or the destination port in a packet matches one of the ports specified in DPORT. Use
of '=' requires multi-port match in your iptables and kernel.

This column was formerly labelled SOURCE PORT(S).

USER - [!][user-name-or-number][:group-name-or-number][+program-name]
This column may only be non-empty if the CHAIN is OUTPUT.

When this column is non-empty, the rule applies only if the program generating the
output is running under the effective user and/or group specified (or is NOT running
under that id if "!" is given).

Examples:

joe
program must be run by joe

:kids
program must be run by a member of the 'kids' group

!:kids
program must not be run by a member of the 'kids' group

+upnpd
#program named upnpd

Important
The ability to specify a program name was removed from Netfilter in kernel
version 2.6.14.

This column was formerly labelled USER/GROUP.

MARK - [!]value[/mask][:C]
Defines a test on the existing packet or connection mark. The rule will match only if
the test returns true.

If you don't want to define a test but need to specify anything in the following
columns, place a "-" in this field.

!
Inverts the test (not equal)

value
Value of the packet or connection mark.

mask
A mask to be applied to the mark before testing.

:C
Designates a connection mark. If omitted, the packet mark's value is tested.

IPSEC - option-list (Optional - Added in Shorewall 4.4.13 but broken until 4.5.4.1 )
The option-list consists of a comma-separated list of options from the following list.
Only packets that will be encrypted or have been decrypted via an SA that matches
these options will have their source address changed. May only be specified when
sections are used.

reqid=number
where number is specified using setkey(8) using the 'unique:number option for the
SPD level.

spi=<number>
where number is the SPI of the SA used to encrypt/decrypt packets.

proto=ah|esp|ipcomp
IPSEC Encapsulation Protocol

mss=number
sets the MSS field in TCP packets

mode=transport|tunnel
IPSEC mode

tunnel-src=address[/mask]
only available with mode=tunnel

tunnel-dst=address[/mask]
only available with mode=tunnel

strict
Means that packets must match all rules.

next
Separates rules; can only be used with strict

yes or ipsec
When used by itself, causes all traffic that will be encrypted/encapsulated or has
been decrypted/un-encapsulated to match the rule.

no or none
When used by itself, causes all traffic that will not be encrypted/encapsulated or
has been decrypted/un-encapsulated to match the rule.

in
May only be used in the FORWARD section and must be the first or the only item the
list. Indicates that matching packets have been decrypted in input.

out
May only be used in the FORWARD section and must be the first or the only item in
the list. Indicates that matching packets will be encrypted on output.

If this column is non-empty and sections are not used, then:

• A chain NAME appearing in the ACTION column must be a chain branched either
directly or indirectly from the accipsecin or accipsecout chain.

• The CHAIN column must contain either accipsecin or accipsecout or a chain branched
either directly or indirectly from those chains.

• These rules will NOT appear in the accounting chain.

HEADERS - [!][any:|exactly:]header-list (Optional - Added in Shorewall 4.4.15)
The header-list consists of a comma-separated list of headers from the following list.

auth, ah, or 51
Authentication Headers extension header.

esp, or 50
Encrypted Security Payload extension header.

hop, hop-by-hop or 0
Hop-by-hop options extension header.

route, ipv6-route or 41
IPv6 Route extension header.

frag, ipv6-frag or 44
IPv6 fragmentation extension header.

none, ipv6-nonxt or 59
No next header

proto, protocol or 255
Any protocol header.

If any: is specified, the rule will match if any of the listed headers are present. If
exactly: is specified, the will match packets that exactly include all specified
headers. If neither is given, any: is assumed.

If ! is entered, the rule will match those packets which would not be matched when !
is omitted.

In all of the above columns except ACTION and CHAIN, the values -, any and all may be used
as wildcards. Omitted trailing columns are also treated as wildcards.

FILES

       /etc/shorewall6/accounting

NOTES

        1. rules file
           http://www.shorewall.net/manpages6/shorewall6-rules.html

        2. http://www.shorewall.net/Accounting.html
           http://www.shorewall.net/Accounting.html

        3. http://www.shorewall.net/shorewall_logging.html
           http://www.shorewall.net/shorewall_logging.html

        4. http://www.shorewall.net/configuration_file_basics.htm#Pairs
           http://www.shorewall.net/configuration_file_basics.htm#Pairs

NAME

SYNOPSIS

DESCRIPTION

FILES

SEE ALSO

NOTES