Provided by: ipmiutil_2.9.7-1_i386 bug

NAME

       ipmiutil_hpm - PICMG HPM.1 Upgrade Agent

SYNOPSIS

       ipmiutil hpm [-mxNUPREFJTVY] parameters

DESCRIPTION

       This  ipmiutil  hpm subcommand updates HPM components using PICMG HPM.1
       file

       This utility can use either the /dev/ipmi0 driver  from  OpenIPMI,  the
       /dev/imb  driver  from  Intel,  the  /dev/ipmikcs  driver from valinux,
       direct user-space IOs, or the IPMI LAN interface if -N.

OPTIONS

       Command line options are described below.

       -m 002000
              Target a specific MC (e.g. bus 00, sa 20, lun 00).   This  could
              be   used  for  PICMG  or  ATCA  blade  systems.   The  trailing
              character, if present, indicates SMI addressing if 's', or  IPMB
              addressing if 'i' or not present.

       -x     Causes extra debug messages to be displayed.

       -N nodename
              Nodename  or  IP  address  of  the  remote  target system.  If a
              nodename is specified, IPMI LAN interface  is  used.   Otherwise
              the local system management interface is used.

       -U rmt_user
              Remote  username  for the nodename given.  The default is a null
              username.

       -P/-R rmt_pswd
              Remote password for the nodename given.  The default is  a  null
              password.

       -E     Use the remote password from Environment variable IPMI_PASSWORD.

       -F drv_t
              Force  the  driver  type  to one of the followng: imb, va, open,
              gnu, landesk, lan, lan2, lan2i, kcs, smb.  Note that lan2i means
              lan2  with  intelplus.   The  default is to detect any available
              driver type and use it.

       -J     Use  the  specified  LanPlus   cipher   suite   (0   thru   17):
              0=none/none/none,       1=sha1/none/none,      2=sha1/sha1/none,
              3=sha1/sha1/cbc128,  4=sha1/sha1/xrc4_128,  5=sha1/sha1/xrc4_40,
              6=md5/none/none, ... 14=md5/md5/xrc4_40.  Default is 3.

       -T     Use  a  specified  IPMI  LAN Authentication Type: 0=None, 1=MD2,
              2=MD5, 4=Straight Password, 5=OEM.

       -V     Use a specified IPMI  LAN  privilege  level.  1=Callback  level,
              2=User level, 3=Operator level, 4=Administrator level (default),
              5=OEM level.

       -Y     Yes, do prompt the  user  for  the  IPMI  LAN  remote  password.
              Alternatives for the password are -E or -P.

PARAMETERS

       hpm parameters

              check
                     Check the target information.

              check filename
                     Display  both  the  existing  target  version  and  image
                     version on the screen.

              download filename
                     Download specified firmware.

              upgrade filename [all] [component x] [activate]
                     Upgrade the firmware using a valid HPM.1 image  file.  If
                     no option is specified, the firmware versions are checked
                     first and the firmware  is  upgraded  only  if  they  are
                     different.

                     all
                            Upgrade   all  components  even  if  the  firmware
                            versions are the same (use this only  after  using
                            "check" command).

                     component x
                            Upgrade only given component from the given file.
                            component 0 - BOOT
                            component 1 - RTK

                     activate
                            Activate new firmware right away.

              activate
                     Activate the newly uploaded firmware.

              targetcap
                     Get the target upgrade capabilities.

              compprop id opt
                     Get  the  specified component properties. Valid component
                     id: 0-7.  Opt can be one of following:
                     0 - General properties
                     1 - Current firmware version
                     2 - Description string
                     3 - Rollback firmware version
                     4 - Deferred firmware version

              abort
                     Abort the on-going firmware upgrade.

              upgstatus
                     Show status of the last long duration command.

              rollback
                     Perform manual rollback on the IPM Controller firmware.

              rollbackstatus
                     Show the rollback status.

              selftestresult
                     Query the self test results.

EXAMPLES

       ipmiutil hpm targetcap
       Gets HPM target capabilities

       ipmiutil hpm -N 192.168.1.1 -U root -P pswd download firmware.img
       Downloads the HPM firmware version contained in firmware.img over  IPMI
       LAN.

SEE ALSO

       ipmiutil(8)   ialarms(8)  iconfig(8)  idiscover(8)  ievents(8)  ifru(8)
       igetevent(8) ihealth(8) ilan(8) ireset(8) isel(8) isensor(8) iserial(8)
       isol(8) iwdt(8)

WARNINGS

       See http://ipmiutil.sourceforge.net/ for the latest version of ipmiutil
       and any bug fix list.

COPYRIGHT

       Copyright (C) 2010  Kontron America, Inc.

       See the file COPYING in the distribution  for  more  details  regarding
       redistribution.

       This  utility  is  distributed  in the hope that it will be useful, but
       WITHOUT ANY WARRANTY.

AUTHOR

       Andy Cress <arcress at users.sourceforge.net>

                           Version 1.0: 25 Aug 2010                    IHPM(8)