Provided by: ipmiutil_2.9.7-1_i386 bug

NAME

       ipmiutil - a meta-command to invoke various IPMI functions.

SYNOPSIS

       ipmiutil <command> [-x -NUPREFJTVY] [other command options]

DESCRIPTION

       This  utility performs various IPMI functions.   Each of the individual
       commands in the ipmiutil project can be invoked via this  meta-command.
       The <command> is one of the following:
          alarms   show/set the front panel alarm LEDs and relays
          leds     show/set the front panel alarm LEDs and relays
          cmd      send a specified raw IPMI command to the BMC
          config   list/save/restore BMC configuration parameters
          dcmi     get/set DCMI parameters
          discover    discover all IPMI servers on this LAN
          ekanalyzer   run  FRU-EKeying analyzer on FRU files (deprecated, see
       fru)
          events   decode IPMI events and display them
          firewall show/set firmware firewall functions
          fru      show decoded FRU inventory data, write asset tag
          fwum     OEM firmware update manager extensions
          getevt   get IPMI events and display them, event daemon
          getevent get IPMI events and display them, event daemon
          health   check and show the basic health of the IPMI BMC
          hpm      HPM firmware update manager extensions
          lan      show/set IPMI LAN parameters and PEF table
          picmg    show/set picmg extended functions
          reset    cause the BMC to reset or power down the system
          sel      show/clear firmware System Event Log records
          sensor   show Sensor Data Records, readings, thresholds
          serial   show/set IPMI Serial & Terminal Mode parameters
          sol      start/stop an SOL console session
          smcoem   SuperMicro OEM functions
          sunoem   Sun OEM functions
          delloem  Dell OEM functions
          tsol     Tyan SOL console start/stop session
          wdt      show/set/reset the watchdog timer
       For help on each command (e.g. 'sel'), enter:
          ipmiutil sel -?
       For man pages on each command, its man page is named  "i<command>",  or
       refer to SEE ALSO below.

       This  utility  can  use either the /dev/ipmi0 driver from OpenIPMI, the
       /dev/imb driver from  Intel,  the  /dev/ipmikcs  driver  from  valinux,
       direct user-space IOs, or the IPMI LAN interface if -N is used.

OPTIONS

       Command  options are described in the man page for each command.  Below
       are a few of the common options.

       -x     Causes extra debug messages to be displayed.

       -N nodename
              Nodename or IP address  of  the  remote  target  system.   If  a
              nodename  is  specified,  IPMI LAN interface is used.  Otherwise
              the local system management interface is used.

       -U rmt_user
              Remote username for the nodename given.  The default is  a  null
              username.

       -P/-R rmt_pswd
              Remote  password  for the nodename given.  The default is a null
              password.

       -E     Use the remote password from Environment variable IPMI_PASSWORD.

       -F drv_t
              Force the driver type to one of the  followng:  imb,  va,  open,
              gnu, landesk, lan, lan2, lan2i, kcs, smb.  Note that lan2i means
              lan2 with intelplus.  The default is  to  detect  any  available
              driver type and use it.

       -J     Use   the   specified   LanPlus   cipher   suite  (0  thru  17):
              0=none/none/none,      1=sha1/none/none,       2=sha1/sha1/none,
              3=sha1/sha1/cbc128,  4=sha1/sha1/xrc4_128,  5=sha1/sha1/xrc4_40,
              6=md5/none/none, ... 14=md5/md5/xrc4_40.  Default is 3.

       -T     Use a specified IPMI LAN  Authentication  Type:  0=None,  1=MD2,
              2=MD5, 4=Straight Password, 5=OEM.

       -V     Use  a  specified  IPMI  LAN  privilege level. 1=Callback level,
              2=User level, 3=Operator level, 4=Administrator level (default),
              5=OEM level.

       -Y     Yes,  do  prompt  the  user  for  the  IPMI LAN remote password.
              Alternatives for the password are -E or -P.

EXAMPLES

       ipmiutil sel
       Shows the IPMI System Event Log entries.

       ipmiutil wdt
       Shows the watchdog timer values.

SEE ALSO

       ialarms(8)  iconfig(8)  icmd(8)  idiscover(8)  ievents(8)  ifirewall(8)
       ifru(8)  ifruset(8)  ifwum(8)  igetevent(8)  ihealth(8) ihpm(8) ilan(8)
       ipicmg(8) ireset(8) isel(8) isensor(8)  iserial(8)  isol(8)  isunoem(8)
       iwdt(8) ipmiutil(8) ipmi_port(8)

WARNINGS

       See http://ipmiutil.sourceforge.net/ for the latest version of ipmiutil
       and any bug fix list.

COPYRIGHT

       Copyright (C) 2009  Kontron America, Inc.

       See the file COPYING in the distribution  for  more  details  regarding
       redistribution.

       This  utility  is  distributed  in the hope that it will be useful, but
       WITHOUT ANY WARRANTY.

AUTHOR

       Andy Cress <arcress at users.sourceforge.net>

                           Version 1.1: 10 May 2012                IPMIUTIL(8)