Provided by: ipmiutil_2.9.7-1_i386 bug


       ipmiutil_sunoem - OEM commands for Sun servers


       ipmiutil sunoem [-mx -NPRUEFJTVY] commands


       ipmiutil  sunoem  commands is a program that uses Sun OEM IPMI commands
       to perform platform-specific functions.


       -m 002000
              Show FRU for a specific MC (e.g. bus 00, sa 20, lun  00).   This
              could  be  used  for  PICMG or ATCA blade systems.  The trailing
              character, if present, indicates SMI addressing if 's', or  IPMB
              addressing if 'i' or not present.

       -x     Causes extra debug messages to be displayed.

       -N nodename
              Nodename  or  IP  address  of  the  remote  target system.  If a
              nodename is specified, IPMI LAN interface  is  used.   Otherwise
              the local system management interface is used.

       -P/-R rmt_pswd
              Remote  password  for the nodename given.  The default is a null

       -U rmt_user
              Remote username for the nodename given.  The default is  a  null

       -E     Use the remote password from Environment variable IPMI_PASSWORD.

       -F drv_t
              Force  the  driver  type  to one of the followng: imb, va, open,
              gnu, landesk, lan, lan2, lan2i, kcs, smb.  Note that lan2i means
              lan2  with  intelplus.   The  default is to detect any available
              driver type and use it.

       -J     Use  the  specified  LanPlus   cipher   suite   (0   thru   17):
              0=none/none/none,       1=sha1/none/none,      2=sha1/sha1/none,
              3=sha1/sha1/cbc128,  4=sha1/sha1/xrc4_128,  5=sha1/sha1/xrc4_40,
              6=md5/none/none, ... 14=md5/md5/xrc4_40.  Default is 3.

       -T     Use  a  specified  IPMI  LAN Authentication Type: 0=None, 1=MD2,
              2=MD5, 4=Straight Password, 5=OEM.

       -V     Use a specified IPMI  LAN  privilege  level.  1=Callback  level,
              2=User level, 3=Operator level, 4=Administrator level (default),
              5=OEM level.

       -Y     Yes, do prompt the  user  for  the  IPMI  LAN  remote  password.
              Alternatives for the password are -E or -P.



              These  commands  provide a way to get and set the status of LEDs
              on a Sun Microsystems server.  Use 'sdr list generic' to  get  a
              list  of  devices  that  are  controllable  LEDs.   The  ledtype
              parameter is optional  and  not  necessary  to  provide  on  the
              command line unless it is required by hardware.

              get sensorid [ledtype]

                     Get  status  of  a  particular LED described by a Generic
                     Device Locator record in the SDR.  A sensorid of all will
                     get the status of all available LEDS.

              set sensorid ledmode [ledtype]

                     Set  status  of  a  particular LED described by a Generic
                     Device Locator record in the SDR.  A sensorid of all will
                     set  the  status  of  all available LEDS to the specified
                     ledmode and ledtype.

              LED Mode is required for set operations:
                     OFF         Off
                     ON          Steady On
                     STANDBY     100ms on 2900ms off blink rate
                     SLOW        1HZ blink rate
                     FAST        4HZ blink rate

              LED Type is optional:
                     OK2RM       Ok to Remove
                     SERVICE     Service Required
                     ACT         Activity
                     LOCATE      Locate

       fan speed 0-100

              Set system fan speed (PWM duty cycle).


                     set userid keyfile

                            This command will allow you to specify an SSH  key
                            to  use  for  a  particular  user  on  the Service
                            Processor.  This key will be used for  CLI  logins
                            to  the  SP  and  not  for  IPMI  sessions.   View
                            available users and their userids with  the  'user
                            list' command.

                     del userid

                            This  command  will  delete  the  SSH  key  for  a
                            specified userid.


       ipmiutil(8)  ialarms(8)  iconfig(8)  icmd(8)  idiscover(8)   ievents(8)
       ifru(8)  igetevent(8)  ihealth(8)  ilan(8) ireset(8) isel(8) isensor(8)
       iserial(8) isol(8)


       See for the latest version of ipmiutil
       and any bug fix list.


       Copyright (C) 2009  Kontron America, Inc.

       See  the  file  COPYING  in the distribution for more details regarding

       This utility is distributed in the hope that it  will  be  useful,  but


       Andy Cress <arcress at>

                           Version 1.0: 09 Sep 2010                 ISUNOEM(8)