Provided by: ipmiutil_2.9.7-1_i386 bug

NAME

       ipmiutil_smcoem - OEM commands for SuperMicro servers

SYNOPSIS

       ipmiutil smcoem [-mx -NPRUEFJTVY] commands

DESCRIPTION

       ipmiutil smcoem is a function that uses SuperMicro OEM IPMI commands to
       perform platform-specific functions.

OPTIONS

       -m 002000
              Show FRU for a specific MC (e.g. bus 00, sa 20, lun  00).   This
              could  be  used  for  PICMG or ATCA blade systems.  The trailing
              character, if present, indicates SMI addressing if 's', or  IPMB
              addressing if 'i' or not present.

       -x     Causes extra debug messages to be displayed.

       -N nodename
              Nodename  or  IP  address  of  the  remote  target system.  If a
              nodename is specified, IPMI LAN interface  is  used.   Otherwise
              the local system management interface is used.

       -P/-R rmt_pswd
              Remote  password  for the nodename given.  The default is a null
              password.

       -U rmt_user
              Remote username for the nodename given.  The default is  a  null
              username.

       -E     Use the remote password from Environment variable IPMI_PASSWORD.

       -F drv_t
              Force  the  driver  type  to one of the followng: imb, va, open,
              gnu, landesk, lan, lan2, lan2i, kcs, smb.  Note that lan2i means
              lan2  with  intelplus.   The  default is to detect any available
              driver type and use it.

       -J     Use  the  specified  LanPlus   cipher   suite   (0   thru   17):
              0=none/none/none,       1=sha1/none/none,      2=sha1/sha1/none,
              3=sha1/sha1/cbc128,  4=sha1/sha1/xrc4_128,  5=sha1/sha1/xrc4_40,
              6=md5/none/none, ... 14=md5/md5/xrc4_40.  Default is 3.

       -T     Use  a  specified  IPMI  LAN Authentication Type: 0=None, 1=MD2,
              2=MD5, 4=Straight Password, 5=OEM.

       -V     Use a specified IPMI  LAN  privilege  level.  1=Callback  level,
              2=User level, 3=Operator level, 4=Administrator level (default),
              5=OEM level.

       -Y     Yes, do prompt the  user  for  the  IPMI  LAN  remote  password.
              Alternatives for the password are -E or -P.

COMMANDS

       intrusion

              This  command  resets  any  chassis intrusion condition that may
              have occurred.

       bmcstatus [enable|disable]
              This command gets  or  sets  the  BMC  service  status.   Alone,
              without  arguments,  it gets the BMC status as either enabled or
              disabled.  With an argument of either enable or disable, it will
              also set the BMC status as specified.

       firmware

              This  command  gets  the  extra firmware version information, if
              available.

       lanport [dedicated|lan1|failover]
              This command gets or sets the IPMI LAN interface port.   If  set
              to  dedicated, only the dedicated IPMI NIC can be configured for
              IPMI LAN.  If set to lan1, only the first onboard NIC (LAN1) can
              be  configured  for  IPMI  LAN.   If  set  to failover, both the
              dedicated and onboard LAN1 port would  be  configured  for  IPMI
              LAN, with the same IP address.

SEE ALSO

       ipmiutil(8)   ialarms(8)  iconfig(8)  icmd(8)  idiscover(8)  ievents(8)
       ifru(8) igetevent(8) ihealth(8) ilan(8)  ireset(8)  isel(8)  isensor(8)
       iserial(8) isol(8)

WARNINGS

       See http://ipmiutil.sourceforge.net/ for the latest version of ipmiutil
       and any bug fix list.

COPYRIGHT

       Copyright (C) 2013  Andy Cress

       See the file COPYING in the distribution  for  more  details  regarding
       redistribution.

       This  utility  is  distributed  in the hope that it will be useful, but
       WITHOUT ANY WARRANTY.

AUTHOR

       Andy Cress <arcress at users.sourceforge.net>

                           Version 1.0: 05 Apr 2013                 ISMCOEM(8)