Ubuntu Manpage: cmake-properties - CMake Properties Reference

name
properties of global scope
properties on directories
properties on targets
properties on tests
properties on source files
properties on cache entries
properties on installed files
deprecated properties on directories
deprecated properties on targets
deprecated properties on source files
copyright

Provided by: cmake-data_3.5.1-1ubuntu3_all

NAME

       cmake-properties - CMake Properties Reference

PROPERTIES OF GLOBAL SCOPE

ALLOW_DUPLICATE_CUSTOM_TARGETS
Allow duplicate custom targets to be created.

Normally CMake requires that all targets built in a project have globally unique logical names (see
policy CMP0002). This is necessary to generate meaningful project file names in Xcode and VS IDE
generators. It also allows the target names to be referenced unambiguously.

Makefile generators are capable of supporting duplicate custom target names. For projects that care only
about Makefile generators and do not wish to support Xcode or VS IDE generators, one may set this
property to true to allow duplicate custom targets. The property allows multiple add_custom_target
command calls in different directories to specify the same target name. However, setting this property
will cause non-Makefile generators to produce an error and refuse to generate the project.

AUTOGEN_TARGETS_FOLDER
Name of FOLDER for *_automoc targets that are added automatically by CMake for targets for which AUTOMOC
is enabled.

If not set, CMake uses the FOLDER property of the parent target as a default value for this property.
See also the documentation for the FOLDER target property and the AUTOMOC target property.

AUTOMOC_TARGETS_FOLDER
Name of FOLDER for *_automoc targets that are added automatically by CMake for targets for which AUTOMOC
is enabled.

This property is obsolete. Use AUTOGEN_TARGETS_FOLDER instead.

If not set, CMake uses the FOLDER property of the parent target as a default value for this property.
See also the documentation for the FOLDER target property and the AUTOMOC target property.

CMAKE_C_KNOWN_FEATURES
List of C features known to this version of CMake.

The features listed in this global property may be known to be available to the C compiler. If the
feature is available with the C compiler, it will be listed in the CMAKE_C_COMPILE_FEATURES variable.

The features listed here may be used with the target_compile_features() command. See the
cmake-compile-features(7) manual for information on compile features and a list of supported compilers.

The features known to this version of CMake are:

c_function_prototypes
Function prototypes, as defined in ISO/IEC 9899:1990.

c_restrict
restrict keyword, as defined in ISO/IEC 9899:1999.

c_static_assert
Static assert, as defined in ISO/IEC 9899:2011.

c_variadic_macros
Variadic macros, as defined in ISO/IEC 9899:1999.

CMAKE_CXX_KNOWN_FEATURES
List of C++ features known to this version of CMake.

The features listed in this global property may be known to be available to the C++ compiler. If the
feature is available with the C++ compiler, it will be listed in the CMAKE_CXX_COMPILE_FEATURES variable.

The features listed here may be used with the target_compile_features() command. See the
cmake-compile-features(7) manual for information on compile features and a list of supported compilers.

The features known to this version of CMake are:

cxx_aggregate_default_initializers
Aggregate default initializers, as defined in N3605.

cxx_alias_templates
Template aliases, as defined in N2258.

cxx_alignas
Alignment control alignas, as defined in N2341.

cxx_alignof
Alignment control alignof, as defined in N2341.

cxx_attributes
Generic attributes, as defined in N2761.

cxx_attribute_deprecated
[[deprecated]] attribute, as defined in N3760.

cxx_auto_type
Automatic type deduction, as defined in N1984.

cxx_binary_literals
Binary literals, as defined in N3472.

cxx_constexpr
Constant expressions, as defined in N2235.

cxx_contextual_conversions
Contextual conversions, as defined in N3323.

cxx_decltype_incomplete_return_types
Decltype on incomplete return types, as defined in N3276.

cxx_decltype
Decltype, as defined in N2343.

cxx_decltype_auto
decltype(auto) semantics, as defined in N3638.

cxx_default_function_template_args
Default template arguments for function templates, as defined in DR226

cxx_defaulted_functions
Defaulted functions, as defined in N2346.

cxx_defaulted_move_initializers
Defaulted move initializers, as defined in N3053.

cxx_delegating_constructors
Delegating constructors, as defined in N1986.

cxx_deleted_functions
Deleted functions, as defined in N2346.

cxx_digit_separators
Digit separators, as defined in N3781.

cxx_enum_forward_declarations
Enum forward declarations, as defined in N2764.

cxx_explicit_conversions
Explicit conversion operators, as defined in N2437.

cxx_extended_friend_declarations
Extended friend declarations, as defined in N1791.

cxx_extern_templates
Extern templates, as defined in N1987.

cxx_final
Override control final keyword, as defined in N2928, N3206 and N3272.

cxx_func_identifier
Predefined __func__ identifier, as defined in N2340.

cxx_generalized_initializers
Initializer lists, as defined in N2672.

cxx_generic_lambdas
Generic lambdas, as defined in N3649.

cxx_inheriting_constructors
Inheriting constructors, as defined in N2540.

cxx_inline_namespaces
Inline namespaces, as defined in N2535.

cxx_lambdas
Lambda functions, as defined in N2927.

cxx_lambda_init_captures
Initialized lambda captures, as defined in N3648.

cxx_local_type_template_args
Local and unnamed types as template arguments, as defined in N2657.

cxx_long_long_type
long long type, as defined in N1811.

cxx_noexcept
Exception specifications, as defined in N3050.

cxx_nonstatic_member_init
Non-static data member initialization, as defined in N2756.

cxx_nullptr
Null pointer, as defined in N2431.

cxx_override
Override control override keyword, as defined in N2928, N3206 and N3272.

cxx_range_for
Range-based for, as defined in N2930.

cxx_raw_string_literals
Raw string literals, as defined in N2442.

cxx_reference_qualified_functions
Reference qualified functions, as defined in N2439.

cxx_relaxed_constexpr
Relaxed constexpr, as defined in N3652.

cxx_return_type_deduction
Return type deduction on normal functions, as defined in N3386.

cxx_right_angle_brackets
Right angle bracket parsing, as defined in N1757.

cxx_rvalue_references
R-value references, as defined in N2118.

cxx_sizeof_member
Size of non-static data members, as defined in N2253.

cxx_static_assert
Static assert, as defined in N1720.

cxx_strong_enums
Strongly typed enums, as defined in N2347.

cxx_thread_local
Thread-local variables, as defined in N2659.

cxx_trailing_return_types
Automatic function return type, as defined in N2541.

cxx_unicode_literals
Unicode string literals, as defined in N2442.

cxx_uniform_initialization
Uniform intialization, as defined in N2640.

cxx_unrestricted_unions
Unrestricted unions, as defined in N2544.

cxx_user_literals
User-defined literals, as defined in N2765.

cxx_variable_templates
Variable templates, as defined in N3651.

cxx_variadic_macros
Variadic macros, as defined in N1653.

cxx_variadic_templates
Variadic templates, as defined in N2242.

cxx_template_template_parameters
Template template parameters, as defined in ISO/IEC 14882:1998.

DEBUG_CONFIGURATIONS
Specify which configurations are for debugging.

The value must be a semi-colon separated list of configuration names. Currently this property is used
only by the target_link_libraries command (see its documentation for details). Additional uses may be
defined in the future.

This property must be set at the top level of the project and before the first target_link_libraries
command invocation. If any entry in the list does not match a valid configuration for the project the
behavior is undefined.

DISABLED_FEATURES
List of features which are disabled during the CMake run.

List of features which are disabled during the CMake run. By default it contains the names of all
packages which were not found. This is determined using the <NAME>_FOUND variables. Packages which are
searched QUIET are not listed. A project can add its own features to this list. This property is used
by the macros in FeatureSummary.cmake.

ENABLED_FEATURES
List of features which are enabled during the CMake run.

List of features which are enabled during the CMake run. By default it contains the names of all
packages which were found. This is determined using the <NAME>_FOUND variables. Packages which are
searched QUIET are not listed. A project can add its own features to this list. This property is used
by the macros in FeatureSummary.cmake.

ENABLED_LANGUAGES
Read-only property that contains the list of currently enabled languages

Set to list of currently enabled languages.

FIND_LIBRARY_USE_LIB64_PATHS
Whether FIND_LIBRARY should automatically search lib64 directories.

FIND_LIBRARY_USE_LIB64_PATHS is a boolean specifying whether the FIND_LIBRARY command should
automatically search the lib64 variant of directories called lib in the search path when building 64-bit
binaries.

FIND_LIBRARY_USE_OPENBSD_VERSIONING
Whether FIND_LIBRARY should find OpenBSD-style shared libraries.

This property is a boolean specifying whether the FIND_LIBRARY command should find shared libraries with
OpenBSD-style versioned extension: ".so.<major>.<minor>". The property is set to true on OpenBSD and
false on other platforms.

GLOBAL_DEPENDS_DEBUG_MODE
Enable global target dependency graph debug mode.

CMake automatically analyzes the global inter-target dependency graph at the beginning of native build
system generation. This property causes it to display details of its analysis to stderr.

GLOBAL_DEPENDS_NO_CYCLES
Disallow global target dependency graph cycles.

CMake automatically analyzes the global inter-target dependency graph at the beginning of native build
system generation. It reports an error if the dependency graph contains a cycle that does not consist of
all STATIC library targets. This property tells CMake to disallow all cycles completely, even among
static libraries.

IN_TRY_COMPILE
Read-only property that is true during a try-compile configuration.

True when building a project inside a TRY_COMPILE or TRY_RUN command.

PACKAGES_FOUND
List of packages which were found during the CMake run.

List of packages which were found during the CMake run. Whether a package has been found is determined
using the <NAME>_FOUND variables.

PACKAGES_NOT_FOUND
List of packages which were not found during the CMake run.

List of packages which were not found during the CMake run. Whether a package has been found is
determined using the <NAME>_FOUND variables.

JOB_POOLS
Ninja only: List of available pools.

A pool is a named integer property and defines the maximum number of concurrent jobs which can be started
by a rule assigned to the pool. The JOB_POOLS property is a semicolon-separated list of pairs using the
syntax NAME=integer (without a space after the equality sign).

For instance:

set_property(GLOBAL PROPERTY JOB_POOLS two_jobs=2 ten_jobs=10)

Defined pools could be used globally by setting CMAKE_JOB_POOL_COMPILE and CMAKE_JOB_POOL_LINK or per
target by setting the target properties JOB_POOL_COMPILE and JOB_POOL_LINK.

Build targets provided by CMake that are meant for individual interactive use, such as install, are
placed in the console pool automatically.

PREDEFINED_TARGETS_FOLDER
Name of FOLDER for targets that are added automatically by CMake.

If not set, CMake uses "CMakePredefinedTargets" as a default value for this property. Targets such as
INSTALL, PACKAGE and RUN_TESTS will be organized into this FOLDER. See also the documentation for the
FOLDER target property.

ECLIPSE_EXTRA_NATURES
List of natures to add to the generated Eclipse project file.

Eclipse projects specify language plugins by using natures. This property should be set to the unique
identifier for a nature (which looks like a Java package name).

REPORT_UNDEFINED_PROPERTIES
If set, report any undefined properties to this file.

If this property is set to a filename then when CMake runs it will report any properties or variables
that were accessed but not defined into the filename specified in this property.

RULE_LAUNCH_COMPILE
Specify a launcher for compile rules.

Makefile Generators and the Ninja generator prefix compiler commands with the given launcher command
line. This is intended to allow launchers to intercept build problems with high granularity. Other
generators ignore this property because their underlying build systems provide no hook to wrap individual
commands with a launcher.

RULE_LAUNCH_CUSTOM
Specify a launcher for custom rules.

Makefile Generators and the Ninja generator prefix custom commands with the given launcher command line.
This is intended to allow launchers to intercept build problems with high granularity. Other generators
ignore this property because their underlying build systems provide no hook to wrap individual commands
with a launcher.

RULE_LAUNCH_LINK
Specify a launcher for link rules.

Makefile Generators and the Ninja generator prefix link and archive commands with the given launcher
command line. This is intended to allow launchers to intercept build problems with high granularity.
Other generators ignore this property because their underlying build systems provide no hook to wrap
individual commands with a launcher.

RULE_MESSAGES
Specify whether to report a message for each make rule.

This property specifies whether Makefile generators should add a progress message describing what each
build rule does. If the property is not set the default is ON. Set the property to OFF to disable
granular messages and report only as each target completes. This is intended to allow scripted builds to
avoid the build time cost of detailed reports. If a CMAKE_RULE_MESSAGES cache entry exists its value
initializes the value of this property. Non-Makefile generators currently ignore this property.

TARGET_ARCHIVES_MAY_BE_SHARED_LIBS
Set if shared libraries may be named like archives.

On AIX shared libraries may be named "lib<name>.a". This property is set to true on such platforms.

TARGET_MESSAGES
Specify whether to report the completion of each target.

This property specifies whether Makefile Generators should add a progress message describing that each
target has been completed. If the property is not set the default is ON. Set the property to OFF to
disable target completion messages.

This option is intended to reduce build output when little or no work needs to be done to bring the build
tree up to date.

If a CMAKE_TARGET_MESSAGES cache entry exists its value initializes the value of this property.

Non-Makefile generators currently ignore this property.

See the counterpart property RULE_MESSAGES to disable everything except for target completion messages.

TARGET_SUPPORTS_SHARED_LIBS
Does the target platform support shared libraries.

TARGET_SUPPORTS_SHARED_LIBS is a boolean specifying whether the target platform supports shared
libraries. Basically all current general general purpose OS do so, the exception are usually embedded
systems with no or special OSs.

USE_FOLDERS
Use the FOLDER target property to organize targets into folders.

If not set, CMake treats this property as OFF by default. CMake generators that are capable of
organizing into a hierarchy of folders use the values of the FOLDER target property to name those
folders. See also the documentation for the FOLDER target property.

PROPERTIES ON DIRECTORIES

ADDITIONAL_MAKE_CLEAN_FILES
Additional files to clean during the make clean stage.

A list of files that will be cleaned as a part of the "make clean" stage.

CACHE_VARIABLES
List of cache variables available in the current directory.

This read-only property specifies the list of CMake cache variables currently defined. It is intended
for debugging purposes.

CLEAN_NO_CUSTOM
Set to true to tell Makefile Generators not to remove the outputs of custom commands for this directory
during the make clean operation. This is ignored on other generators because it is not possible to
implement.

CMAKE_CONFIGURE_DEPENDS
Tell CMake about additional input files to the configuration process. If any named file is modified the
build system will re-run CMake to re-configure the file and generate the build system again.

Specify files as a semicolon-separated list of paths. Relative paths are interpreted as relative to the
current source directory.

COMPILE_DEFINITIONS
Preprocessor definitions for compiling a directory's sources.

This property specifies the list of options given so far to the add_definitions() command.

This property will be initialized in each directory by its value in the directory's parent.

CMake will automatically drop some definitions that are not supported by the native build tool. The VS6
IDE does not support definition values with spaces (but NMake does).

Disclaimer: Most native build tools have poor support for escaping certain values. CMake has
work-arounds for many cases but some values may just not be possible to pass correctly. If a value does
not seem to be escaped correctly, do not attempt to work-around the problem by adding escape sequences to
the value. Your work-around may break in a future version of CMake that has improved escape support.
Instead consider defining the macro in a (configured) header file. Then report the limitation. Known
limitations include:

# - broken almost everywhere
; - broken in VS IDE 7.0 and Borland Makefiles
, - broken in VS IDE
% - broken in some cases in NMake
& | - broken in some cases on MinGW
^ < > \" - broken in most Make tools on Windows

CMake does not reject these values outright because they do work in some cases. Use with caution.

Contents of COMPILE_DEFINITIONS may use "generator expressions" with the syntax $<...>. See the
cmake-generator-expressions(7) manual for available expressions. See the cmake-buildsystem(7) manual for
more on defining buildsystem properties.

The corresponding COMPILE_DEFINITIONS_<CONFIG> property may be set to specify per-configuration
definitions. Generator expressions should be preferred instead of setting the alternative property.

COMPILE_OPTIONS
List of options to pass to the compiler.

This property holds a ;-list of options given so far to the add_compile_options() command.

This property is used to initialize the COMPILE_OPTIONS target property when a target is created, which
is used by the generators to set the options for the compiler.

Contents of COMPILE_OPTIONS may use "generator expressions" with the syntax $<...>. See the
cmake-generator-expressions(7) manual for available expressions. See the cmake-buildsystem(7) manual for
more on defining buildsystem properties.

DEFINITIONS
For CMake 2.4 compatibility only. Use COMPILE_DEFINITIONS instead.

This read-only property specifies the list of flags given so far to the add_definitions() command. It is
intended for debugging purposes. Use the COMPILE_DEFINITIONS directory property instead.

This built-in read-only property does not exist if policy CMP0059 is set to NEW.

EXCLUDE_FROM_ALL
Exclude the directory from the all target of its parent.

A property on a directory that indicates if its targets are excluded from the default build target. If
it is not, then with a Makefile for example typing make will cause the targets to be built. The same
concept applies to the default build of other generators.

IMPLICIT_DEPENDS_INCLUDE_TRANSFORM
Specify #include line transforms for dependencies in a directory.

This property specifies rules to transform macro-like #include lines during implicit dependency scanning
of C and C++ source files. The list of rules must be semicolon-separated with each entry of the form
"A_MACRO(%)=value-with-%" (the % must be literal). During dependency scanning occurrences of
A_MACRO(...) on #include lines will be replaced by the value given with the macro argument substituted
for '%'. For example, the entry

MYDIR(%)=<mydir/%>

will convert lines of the form

#include MYDIR(myheader.h)

#include <mydir/myheader.h>

allowing the dependency to be followed.

This property applies to sources in all targets within a directory. The property value is initialized in
each directory by its value in the directory's parent.

INCLUDE_DIRECTORIES
List of preprocessor include file search directories.

This property specifies the list of directories given so far to the include_directories() command.

This property is used to populate the INCLUDE_DIRECTORIES target property, which is used by the
generators to set the include directories for the compiler.

In addition to accepting values from that command, values may be set directly on any directory using the
set_property() command. A directory gets its initial value from its parent directory if it has one. The
intial value of the INCLUDE_DIRECTORIES target property comes from the value of this property. Both
directory and target property values are adjusted by calls to the include_directories() command.

The target property values are used by the generators to set the include paths for the compiler.

Contents of INCLUDE_DIRECTORIES may use "generator expressions" with the syntax $<...>. See the
cmake-generator-expressions(7) manual for available expressions. See the cmake-buildsystem(7) manual for
more on defining buildsystem properties.

INCLUDE_REGULAR_EXPRESSION
Include file scanning regular expression.

This property specifies the regular expression used during dependency scanning to match include files
that should be followed. See the include_regular_expression() command for a high-level interface to set
this property.

INTERPROCEDURAL_OPTIMIZATION_<CONFIG>
Per-configuration interprocedural optimization for a directory.

This is a per-configuration version of INTERPROCEDURAL_OPTIMIZATION. If set, this property overrides the
generic property for the named configuration.

INTERPROCEDURAL_OPTIMIZATION
Enable interprocedural optimization for targets in a directory.

If set to true, enables interprocedural optimizations if they are known to be supported by the compiler.

LINK_DIRECTORIES
List of linker search directories.

This read-only property specifies the list of directories given so far to the link_directories command.
It is intended for debugging purposes.

LISTFILE_STACK
The current stack of listfiles being processed.

This property is mainly useful when trying to debug errors in your CMake scripts. It returns a list of
what list files are currently being processed, in order. So if one listfile does an INCLUDE command then
that is effectively pushing the included listfile onto the stack.

MACROS
List of macro commands available in the current directory.

This read-only property specifies the list of CMake macros currently defined. It is intended for
debugging purposes. See the macro command.

PARENT_DIRECTORY
Source directory that added current subdirectory.

This read-only property specifies the source directory that added the current source directory as a
subdirectory of the build. In the top-level directory the value is the empty-string.

RULE_LAUNCH_COMPILE
Specify a launcher for compile rules.

See the global property of the same name for details. This overrides the global property for a
directory.

RULE_LAUNCH_CUSTOM
Specify a launcher for custom rules.

See the global property of the same name for details. This overrides the global property for a
directory.

RULE_LAUNCH_LINK
Specify a launcher for link rules.

See the global property of the same name for details. This overrides the global property for a
directory.

TEST_INCLUDE_FILE
A cmake file that will be included when ctest is run.

If you specify TEST_INCLUDE_FILE, that file will be included and processed when ctest is run on the
directory.

VARIABLES
List of variables defined in the current directory.

This read-only property specifies the list of CMake variables currently defined. It is intended for
debugging purposes.

VS_GLOBAL_SECTION_POST_<section>
Specify a postSolution global section in Visual Studio.

Setting a property like this generates an entry of the following form in the solution file:

GlobalSection(<section>) = postSolution
<contents based on property value>
EndGlobalSection

The property must be set to a semicolon-separated list of key=value pairs. Each such pair will be
transformed into an entry in the solution global section. Whitespace around key and value is ignored.
List elements which do not contain an equal sign are skipped.

This property only works for Visual Studio 7 and above; it is ignored on other generators. The property
only applies when set on a directory whose CMakeLists.txt contains a project() command.

Note that CMake generates postSolution sections ExtensibilityGlobals and ExtensibilityAddIns by default.
If you set the corresponding property, it will override the default section. For example, setting
VS_GLOBAL_SECTION_POST_ExtensibilityGlobals will override the default contents of the
ExtensibilityGlobals section, while keeping ExtensibilityAddIns on its default.

VS_GLOBAL_SECTION_PRE_<section>
Specify a preSolution global section in Visual Studio.

Setting a property like this generates an entry of the following form in the solution file:

GlobalSection(<section>) = preSolution
<contents based on property value>
EndGlobalSection

This property only works for Visual Studio 7 and above; it is ignored on other generators. The property
only applies when set on a directory whose CMakeLists.txt contains a project() command.

PROPERTIES ON TARGETS

ALIASED_TARGET
Name of target aliased by this target.

If this is an Alias Target, this property contains the name of the target aliased.

ANDROID_ANT_ADDITIONAL_OPTIONS
Set the additional options for Android Ant build system. This is a string value containing all command
line options for the Ant build. This property is initialized by the value of the
CMAKE_ANDROID_ANT_ADDITIONAL_OPTIONS variable if it is set when a target is created.

ANDROID_API
Set the Android Target API version (e.g. 15). The version number must be a positive decimal integer.
This property is initialized by the value of the CMAKE_ANDROID_API variable if it is set when a target is
created.

ANDROID_API_MIN
Set the Android MIN API version (e.g. 9). The version number must be a positive decimal integer. This
property is initialized by the value of the CMAKE_ANDROID_API_MIN variable if it is set when a target is
created. Native code builds using this API version.

ANDROID_ARCH
Set the Android target architecture.

This is a string property that could be set to the one of the following values:

• armv7-a: "ARMv7-A (armv7-a)"

• armv7-a-hard: "ARMv7-A, hard-float ABI (armv7-a)"

• arm64-v8a: "ARMv8-A, 64bit (arm64-v8a)"

• x86: "x86 (x86)"

• x86_64: "x86_64 (x86_64)"

This property is initialized by the value of the CMAKE_ANDROID_ARCH variable if it is set when a target
is created.

ANDROID_ASSETS_DIRECTORIES
Set the Android assets directories to copy into the main assets folder before build. This a string
property that contains the directory paths separated by semicolon. This property is initialized by the
value of the CMAKE_ANDROID_ASSETS_DIRECTORIES variable if it is set when a target is created.

ANDROID_GUI
Build an executable as an application package on Android.

When this property is set to true the executable when built for Android will be created as an application
package. This property is initialized by the value of the CMAKE_ANDROID_GUI variable if it is set when a
target is created.

Add the AndroidManifest.xml source file explicitly to the target add_executable() command invocation to
specify the root directory of the application package source.

ANDROID_JAR_DEPENDENCIES
Set the Android property that specifies JAR dependencies. This is a string value property. This property
is initialized by the value of the CMAKE_ANDROID_JAR_DEPENDENCIES variable if it is set when a target is
created.

ANDROID_JAR_DIRECTORIES
Set the Android property that specifies directories to search for the JAR libraries.

This a string property that contains the directory paths separated by semicolons. This property is
initialized by the value of the CMAKE_ANDROID_JAR_DIRECTORIES variable if it is set when a target is
created.

Contents of ANDROID_JAR_DIRECTORIES may use "generator expressions" with the syntax $<...>. See the
cmake-generator-expressions(7) manual for available expressions.

ANDROID_JAVA_SOURCE_DIR
Set the Android property that defines the Java source code root directories. This a string property that
contains the directory paths separated by semicolon. This property is initialized by the value of the
CMAKE_ANDROID_JAVA_SOURCE_DIR variable if it is set when a target is created.

ANDROID_NATIVE_LIB_DEPENDENCIES
Set the Android property that specifies the .so dependencies. This is a string property.

This property is initialized by the value of the CMAKE_ANDROID_NATIVE_LIB_DEPENDENCIES variable if it is
set when a target is created.

Contents of ANDROID_NATIVE_LIB_DEPENDENCIES may use "generator expressions" with the syntax $<...>. See
the cmake-generator-expressions(7) manual for available expressions.

ANDROID_NATIVE_LIB_DIRECTORIES
Set the Android property that specifies directories to search for the

This a string property that contains the directory paths separated by semicolons.

This property is initialized by the value of the CMAKE_ANDROID_NATIVE_LIB_DIRECTORIES variable if it is
set when a target is created.

Contents of ANDROID_NATIVE_LIB_DIRECTORIES may use "generator expressions" with the syntax $<...>. See
the cmake-generator-expressions(7) manual for available expressions.

ANDROID_PROCESS_MAX
Set the Android property that defines the maximum number of a parallel Android NDK compiler processes
(e.g. 4). This property is initialized by the value of the CMAKE_ANDROID_PROCESS_MAX variable if it is
set when a target is created.

ANDROID_PROGUARD
When this property is set to true that enables the ProGuard tool to shrink, optimize, and obfuscate the
code by removing unused code and renaming classes, fields, and methods with semantically obscure names.
This property is initialized by the value of the CMAKE_ANDROID_PROGUARD variable if it is set when a
target is created.

ANDROID_PROGUARD_CONFIG_PATH
Set the Android property that specifies the location of the ProGuard config file. Leave empty to use the
default one. This a string property that contains the path to ProGuard config file. This property is
initialized by the value of the CMAKE_ANDROID_PROGUARD_CONFIG_PATH variable if it is set when a target is
created.

ANDROID_SECURE_PROPS_PATH
Set the Android property that states the location of the secure properties file. This is a string
property that contains the file path. This property is initialized by the value of the
CMAKE_ANDROID_SECURE_PROPS_PATH variable if it is set when a target is created.

ANDROID_SKIP_ANT_STEP
Set the Android property that defines whether or not to skip the Ant build step. This is a boolean
property initialized by the value of the CMAKE_ANDROID_SKIP_ANT_STEP variable if it is set when a target
is created.

ANDROID_STL_TYPE
Set the Android property that defines the type of STL support for the project. This is a string property
that could set to the one of the following values: none e.g. "No C++ Support" system
e.g. "Minimal C++ without STL" gabi++_static e.g. "GAbi++ Static" gabi++_shared e.g. "GAbi++ Shared"
gnustl_static e.g. "GNU libstdc++ Static" gnustl_shared e.g. "GNU libstdc++ Shared" stlport_static e.g.
"STLport Static" stlport_shared e.g. "STLport Shared" This property is initialized by the value of the
variable:CMAKE_ANDROID_STL_TYPE variable if it is set when a target is created.

ARCHIVE_OUTPUT_DIRECTORY_<CONFIG>
Per-configuration output directory for ARCHIVE target files.

This is a per-configuration version of the ARCHIVE_OUTPUT_DIRECTORY target property, but
multi-configuration generators (VS, Xcode) do NOT append a per-configuration subdirectory to the
specified directory. This property is initialized by the value of the
CMAKE_ARCHIVE_OUTPUT_DIRECTORY_<CONFIG> variable if it is set when a target is created.

Contents of ARCHIVE_OUTPUT_DIRECTORY_<CONFIG> may use generator expressions.

ARCHIVE_OUTPUT_DIRECTORY
Output directory in which to build ARCHIVE target files.

This property specifies the directory into which archive target files should be built. The property
value may use generator expressions. Multi-configuration generators (VS, Xcode) append a
per-configuration subdirectory to the specified directory unless a generator expression is used.

This property is initialized by the value of the variable CMAKE_ARCHIVE_OUTPUT_DIRECTORY if it is set
when a target is created.

See also the ARCHIVE_OUTPUT_DIRECTORY_<CONFIG> target property.

ARCHIVE_OUTPUT_NAME_<CONFIG>
Per-configuration output name for ARCHIVE target files.

This is the configuration-specific version of the ARCHIVE_OUTPUT_NAME target property.

ARCHIVE_OUTPUT_NAME
Output name for ARCHIVE target files.

This property specifies the base name for archive target files. It overrides OUTPUT_NAME and
OUTPUT_NAME_<CONFIG> properties.

See also the ARCHIVE_OUTPUT_NAME_<CONFIG> target property.

AUTOGEN_TARGET_DEPENDS
Target dependencies of the corresponding _automoc target.

Targets which have their AUTOMOC target ON have a corresponding _automoc target which is used to
autogenerate generate moc files. As this _automoc target is created at generate-time, it is not possible
to define dependencies of it, such as to create inputs for the moc executable.

The AUTOGEN_TARGET_DEPENDS target property can be set instead to a list of dependencies for the _automoc
target. The buildsystem will be generated to depend on its contents.

See the cmake-qt(7) manual for more information on using CMake with Qt.

AUTOMOC_MOC_OPTIONS
Additional options for moc when using AUTOMOC

This property is only used if the AUTOMOC property is ON for this target. In this case, it holds
additional command line options which will be used when moc is executed during the build, i.e. it is
equivalent to the optional OPTIONS argument of the qt4_wrap_cpp() macro.

By default it is empty.

See the cmake-qt(7) manual for more information on using CMake with Qt.

AUTOMOC
Should the target be processed with automoc (for Qt projects).

AUTOMOC is a boolean specifying whether CMake will handle the Qt moc preprocessor automatically, i.e.
without having to use the QT4_WRAP_CPP() or QT5_WRAP_CPP() macro. Currently Qt4 and Qt5 are supported.
When this property is set ON, CMake will scan the source files at build time and invoke moc accordingly.
If an #include statement like #include "moc_foo.cpp" is found, the Q_OBJECT class declaration is expected
in the header, and moc is run on the header file. If an #include statement like #include "foo.moc" is
found, then a Q_OBJECT is expected in the current source file and moc is run on the file itself.
Additionally, header files with the same base name (like foo.h) or _p appended to the base name (like
foo_p.h) are parsed for Q_OBJECT macros, and if found, moc is also executed on those files. AUTOMOC
checks multiple header alternative extensions, such as hpp, hxx etc when searching for headers. The
resulting moc files, which are not included as shown above in any of the source files are included in a
generated <targetname>_automoc.cpp file, which is compiled as part of the target. This property is
initialized by the value of the CMAKE_AUTOMOC variable if it is set when a target is created.

Additional command line options for moc can be set via the AUTOMOC_MOC_OPTIONS property.

By enabling the CMAKE_AUTOMOC_RELAXED_MODE variable the rules for searching the files which will be
processed by moc can be relaxed. See the documentation for this variable for more details.

The global property AUTOGEN_TARGETS_FOLDER can be used to group the automoc targets together in an IDE,
e.g. in MSVS.

See the cmake-qt(7) manual for more information on using CMake with Qt.

AUTOUIC
Should the target be processed with autouic (for Qt projects).

AUTOUIC is a boolean specifying whether CMake will handle the Qt uic code generator automatically, i.e.
without having to use the QT4_WRAP_UI() or QT5_WRAP_UI() macro. Currently Qt4 and Qt5 are supported.

When this property is ON, CMake will scan the source files at build time and invoke uic accordingly. If
an #include statement like #include "ui_foo.h" is found in foo.cpp, a foo.ui file is expected next to
foo.cpp, and uic is run on the foo.ui file. This property is initialized by the value of the
CMAKE_AUTOUIC variable if it is set when a target is created.

Additional command line options for uic can be set via the AUTOUIC_OPTIONS source file property on the
foo.ui file. The global property AUTOGEN_TARGETS_FOLDER can be used to group the autouic targets
together in an IDE, e.g. in MSVS.

See the cmake-qt(7) manual for more information on using CMake with Qt.

AUTOUIC_OPTIONS
Additional options for uic when using AUTOUIC

This property holds additional command line options which will be used when uic is executed during the
build via AUTOUIC, i.e. it is equivalent to the optional OPTIONS argument of the qt4_wrap_ui() macro.

By default it is empty.

This property is initialized by the value of the CMAKE_AUTOUIC_OPTIONS variable if it is set when a
target is created.

The options set on the target may be overridden by AUTOUIC_OPTIONS set on the .ui source file.

This property may use "generator expressions" with the syntax $<...>. See the
cmake-generator-expressions(7) manual for available expressions.

See the cmake-qt(7) manual for more information on using CMake with Qt.

AUTORCC
Should the target be processed with autorcc (for Qt projects).

AUTORCC is a boolean specifying whether CMake will handle the Qt rcc code generator automatically, i.e.
without having to use the QT4_ADD_RESOURCES() or QT5_ADD_RESOURCES() macro. Currently Qt4 and Qt5 are
supported.

When this property is ON, CMake will handle .qrc files added as target sources at build time and invoke
rcc accordingly. This property is initialized by the value of the CMAKE_AUTORCC variable if it is set
when a target is created.

Additional command line options for rcc can be set via the AUTORCC_OPTIONS source file property on the
.qrc file.

The global property AUTOGEN_TARGETS_FOLDER can be used to group the autorcc targets together in an IDE,
e.g. in MSVS.

See the cmake-qt(7) manual for more information on using CMake with Qt.

AUTORCC_OPTIONS
Additional options for rcc when using AUTORCC

This property holds additional command line options which will be used when rcc is executed during the
build via AUTORCC, i.e. it is equivalent to the optional OPTIONS argument of the qt4_add_resources()
macro.

By default it is empty.

This property is initialized by the value of the CMAKE_AUTORCC_OPTIONS variable if it is set when a
target is created.

The options set on the target may be overridden by AUTORCC_OPTIONS set on the .qrc source file.

See the cmake-qt(7) manual for more information on using CMake with Qt.

BINARY_DIR
This read-only property reports the value of the CMAKE_CURRENT_BINARY_DIR variable in the directory in
which the target was defined.

BUILD_WITH_INSTALL_RPATH
Should build tree targets have install tree rpaths.

BUILD_WITH_INSTALL_RPATH is a boolean specifying whether to link the target in the build tree with the
INSTALL_RPATH. This takes precedence over SKIP_BUILD_RPATH and avoids the need for relinking before
installation. This property is initialized by the value of the variable CMAKE_BUILD_WITH_INSTALL_RPATH
if it is set when a target is created.

BUNDLE_EXTENSION
The file extension used to name a BUNDLE target on the OS X and iOS.

The default value is bundle - you can also use plugin or whatever file extension is required by the host
app for your bundle.

BUNDLE
This target is a CFBundle on the OS X.

If a module library target has this property set to true it will be built as a CFBundle when built on the
mac. It will have the directory structure required for a CFBundle and will be suitable to be used for
creating Browser Plugins or other application resources.

C_EXTENSIONS
Boolean specifying whether compiler specific extensions are requested.

This property specifies whether compiler specific extensions should be used. For some compilers, this
results in adding a flag such as -std=gnu11 instead of -std=c11 to the compile line. This property is ON
by default.

See the cmake-compile-features(7) manual for information on compile features and a list of supported
compilers.

This property is initialized by the value of the CMAKE_C_EXTENSIONS variable if it is set when a target
is created.

C_STANDARD
The C standard whose features are requested to build this target.

This property specifies the C standard whose features are requested to build this target. For some
compilers, this results in adding a flag such as -std=gnu11 to the compile line. For compilers that have
no notion of a standard level, such as MSVC, this has no effect.

Supported values are 90, 99 and 11.

If the value requested does not result in a compile flag being added for the compiler in use, a previous
standard flag will be added instead. This means that using:

set_property(TARGET tgt PROPERTY C_STANDARD 11)

with a compiler which does not support -std=gnu11 or an equivalent flag will not result in an error or
warning, but will instead add the -std=gnu99 or -std=gnu90 flag if supported. This "decay" behavior may
be controlled with the C_STANDARD_REQUIRED target property.

See the cmake-compile-features(7) manual for information on compile features and a list of supported
compilers.

This property is initialized by the value of the CMAKE_C_STANDARD variable if it is set when a target is
created.

C_STANDARD_REQUIRED
Boolean describing whether the value of C_STANDARD is a requirement.

If this property is set to ON, then the value of the C_STANDARD target property is treated as a
requirement. If this property is OFF or unset, the C_STANDARD target property is treated as optional and
may "decay" to a previous standard if the requested is not available. For compilers that have no notion
of a standard level, such as MSVC, this has no effect.

See the cmake-compile-features(7) manual for information on compile features and a list of supported
compilers.

This property is initialized by the value of the CMAKE_C_STANDARD_REQUIRED variable if it is set when a
target is created.

COMPATIBLE_INTERFACE_BOOL
Properties which must be compatible with their link interface

The COMPATIBLE_INTERFACE_BOOL property may contain a list of properties for this target which must be
consistent when evaluated as a boolean with the INTERFACE variant of the property in all linked
dependees. For example, if a property FOO appears in the list, then for each dependee, the INTERFACE_FOO
property content in all of its dependencies must be consistent with each other, and with the FOO property
in the depender.

Consistency in this sense has the meaning that if the property is set, then it must have the same boolean
value as all others, and if the property is not set, then it is ignored.

Note that for each dependee, the set of properties specified in this property must not intersect with the
set specified in any of the other Compatible Interface Properties.

COMPATIBLE_INTERFACE_NUMBER_MAX
Properties whose maximum value from the link interface will be used.

The COMPATIBLE_INTERFACE_NUMBER_MAX property may contain a list of properties for this target whose
maximum value may be read at generate time when evaluated in the INTERFACE variant of the property in all
linked dependees. For example, if a property FOO appears in the list, then for each dependee, the
INTERFACE_FOO property content in all of its dependencies will be compared with each other and with the
FOO property in the depender. When reading the FOO property at generate time, the maximum value will be
returned. If the property is not set, then it is ignored.

Note that for each dependee, the set of properties specified in this property must not intersect with the
set specified in any of the other Compatible Interface Properties.

COMPATIBLE_INTERFACE_NUMBER_MIN
Properties whose maximum value from the link interface will be used.

The COMPATIBLE_INTERFACE_NUMBER_MIN property may contain a list of properties for this target whose
minimum value may be read at generate time when evaluated in the INTERFACE variant of the property of all
linked dependees. For example, if a property FOO appears in the list, then for each dependee, the
INTERFACE_FOO property content in all of its dependencies will be compared with each other and with the
FOO property in the depender. When reading the FOO property at generate time, the minimum value will be
returned. If the property is not set, then it is ignored.

Note that for each dependee, the set of properties specified in this property must not intersect with the
set specified in any of the other Compatible Interface Properties.

COMPATIBLE_INTERFACE_STRING
Properties which must be string-compatible with their link interface

The COMPATIBLE_INTERFACE_STRING property may contain a list of properties for this target which must be
the same when evaluated as a string in the INTERFACE variant of the property all linked dependees. For
example, if a property FOO appears in the list, then for each dependee, the INTERFACE_FOO property
content in all of its dependencies must be equal with each other, and with the FOO property in the
depender. If the property is not set, then it is ignored.

Note that for each dependee, the set of properties specified in this property must not intersect with the
set specified in any of the other Compatible Interface Properties.

COMPILE_DEFINITIONS
Preprocessor definitions for compiling a target's sources.

CMake will automatically drop some definitions that are not supported by the native build tool. The VS6
IDE does not support definition values with spaces (but NMake does).

CMake does not reject these values outright because they do work in some cases. Use with caution.

The corresponding COMPILE_DEFINITIONS_<CONFIG> property may be set to specify per-configuration
definitions. Generator expressions should be preferred instead of setting the alternative property.

COMPILE_FEATURES
Compiler features enabled for this target.

The list of features in this property are a subset of the features listed in the
CMAKE_CXX_COMPILE_FEATURES variable.

Contents of COMPILE_FEATURES may use "generator expressions" with the syntax $<...>. See the
cmake-generator-expressions(7) manual for available expressions. See the cmake-compile-features(7)
manual for information on compile features and a list of supported compilers.

COMPILE_FLAGS
Additional flags to use when compiling this target's sources.

The COMPILE_FLAGS property sets additional compiler flags used to build sources within the target. Use
COMPILE_DEFINITIONS to pass additional preprocessor definitions.

This property is deprecated. Use the COMPILE_OPTIONS property or the target_compile_options command
instead.

COMPILE_OPTIONS
List of options to pass to the compiler.

This property holds a ;-list of options specified so far for its target. Use the
target_compile_options() command to append more options.

This property is intialized by the COMPILE_OPTIONS directory property when a target is created, and is
used by the generators to set the options for the compiler.

COMPILE_PDB_NAME
Output name for the MS debug symbol .pdb file generated by the compiler while building source files.

This property specifies the base name for the debug symbols file. If not set, the default is
unspecified.

NOTE:
The compiler-generated program database files are specified by the /Fd compiler flag and are not the
same as linker-generated program database files specified by the /pdb linker flag. Use the PDB_NAME
property to specify the latter.

This property is not implemented by the Visual Studio 6 generator.

COMPILE_PDB_NAME_<CONFIG>
Per-configuration output name for the MS debug symbol .pdb file generated by the compiler while building
source files.

This is the configuration-specific version of COMPILE_PDB_NAME.

This property is not implemented by the Visual Studio 6 generator.

COMPILE_PDB_OUTPUT_DIRECTORY
Output directory for the MS debug symbol .pdb file generated by the compiler while building source files.

This property specifies the directory into which the MS debug symbols will be placed by the compiler.
This property is initialized by the value of the CMAKE_COMPILE_PDB_OUTPUT_DIRECTORY variable if it is set
when a target is created.

This property is not implemented by the Visual Studio 6 generator.

COMPILE_PDB_OUTPUT_DIRECTORY_<CONFIG>
Per-configuration output directory for the MS debug symbol .pdb file generated by the compiler while
building source files.

This is a per-configuration version of COMPILE_PDB_OUTPUT_DIRECTORY, but multi-configuration generators
(VS, Xcode) do NOT append a per-configuration subdirectory to the specified directory. This property is
initialized by the value of the CMAKE_COMPILE_PDB_OUTPUT_DIRECTORY_<CONFIG> variable if it is set when a
target is created.

This property is not implemented by the Visual Studio 6 generator.

<CONFIG>_OUTPUT_NAME
Old per-configuration target file base name. Use OUTPUT_NAME_<CONFIG> instead.

This is a configuration-specific version of the OUTPUT_NAME target property.

<CONFIG>_POSTFIX
Postfix to append to the target file name for configuration <CONFIG>.

When building with configuration <CONFIG> the value of this property is appended to the target file name
built on disk. For non-executable targets, this property is initialized by the value of the variable
CMAKE_<CONFIG>_POSTFIX if it is set when a target is created. This property is ignored on the Mac for
Frameworks and App Bundles.

CROSSCOMPILING_EMULATOR
Use the given emulator to run executables created when crosscompiling. This command will be added as a
prefix to add_test() test commands for built target system executables.

CXX_EXTENSIONS
Boolean specifying whether compiler specific extensions are requested.

This property specifies whether compiler specific extensions should be used. For some compilers, this
results in adding a flag such as -std=gnu++11 instead of -std=c++11 to the compile line. This property
is ON by default.

See the cmake-compile-features(7) manual for information on compile features and a list of supported
compilers.

This property is initialized by the value of the CMAKE_CXX_EXTENSIONS variable if it is set when a target
is created.

CXX_STANDARD
The C++ standard whose features are requested to build this target.

This property specifies the C++ standard whose features are requested to build this target. For some
compilers, this results in adding a flag such as -std=gnu++11 to the compile line. For compilers that
have no notion of a standard level, such as MSVC, this has no effect.

Supported values are 98, 11 and 14.

If the value requested does not result in a compile flag being added for the compiler in use, a previous
standard flag will be added instead. This means that using:

set_property(TARGET tgt PROPERTY CXX_STANDARD 11)

with a compiler which does not support -std=gnu++11 or an equivalent flag will not result in an error or
warning, but will instead add the -std=gnu++98 flag if supported. This "decay" behavior may be
controlled with the CXX_STANDARD_REQUIRED target property.

See the cmake-compile-features(7) manual for information on compile features and a list of supported
compilers.

This property is initialized by the value of the CMAKE_CXX_STANDARD variable if it is set when a target
is created.

CXX_STANDARD_REQUIRED
Boolean describing whether the value of CXX_STANDARD is a requirement.

If this property is set to ON, then the value of the CXX_STANDARD target property is treated as a
requirement. If this property is OFF or unset, the CXX_STANDARD target property is treated as optional
and may "decay" to a previous standard if the requested is not available. For compilers that have no
notion of a standard level, such as MSVC, this has no effect.

See the cmake-compile-features(7) manual for information on compile features and a list of supported
compilers.

This property is initialized by the value of the CMAKE_CXX_STANDARD_REQUIRED variable if it is set when a
target is created.

DEBUG_POSTFIX
See target property <CONFIG>_POSTFIX.

This property is a special case of the more-general <CONFIG>_POSTFIX property for the DEBUG
configuration.

DEFINE_SYMBOL
Define a symbol when compiling this target's sources.

DEFINE_SYMBOL sets the name of the preprocessor symbol defined when compiling sources in a shared
library. If not set here then it is set to target_EXPORTS by default (with some substitutions if the
target is not a valid C identifier). This is useful for headers to know whether they are being included
from inside their library or outside to properly setup dllexport/dllimport decorations.

EchoString
A message to be displayed when the target is built.

A message to display on some generators (such as makefiles) when the target is built.

ENABLE_EXPORTS
Specify whether an executable exports symbols for loadable modules.

Normally an executable does not export any symbols because it is the final program. It is possible for
an executable to export symbols to be used by loadable modules. When this property is set to true CMake
will allow other targets to "link" to the executable with the TARGET_LINK_LIBRARIES() command. On all
platforms a target-level dependency on the executable is created for targets that link to it. For DLL
platforms an import library will be created for the exported symbols and then used for linking. All
Windows-based systems including Cygwin are DLL platforms. For non-DLL platforms that require all symbols
to be resolved at link time, such as OS X, the module will "link" to the executable using a flag like
-bundle_loader. For other non-DLL platforms the link rule is simply ignored since the dynamic loader
will automatically bind symbols when the module is loaded.

This property is initialized by the value of the variable CMAKE_ENABLE_EXPORTS if it is set when a target
is created.

EXCLUDE_FROM_ALL
Exclude the target from the all target.

A property on a target that indicates if the target is excluded from the default build target. If it is
not, then with a Makefile for example typing make will cause this target to be built. The same concept
applies to the default build of other generators. Installing a target with EXCLUDE_FROM_ALL set to true
has undefined behavior.

EXCLUDE_FROM_DEFAULT_BUILD_<CONFIG>
Per-configuration version of target exclusion from "Build Solution".

This is the configuration-specific version of EXCLUDE_FROM_DEFAULT_BUILD. If the generic
EXCLUDE_FROM_DEFAULT_BUILD is also set on a target, EXCLUDE_FROM_DEFAULT_BUILD_<CONFIG> takes precedence
in configurations for which it has a value.

EXCLUDE_FROM_DEFAULT_BUILD
Exclude target from "Build Solution".

This property is only used by Visual Studio generators 7 and above. When set to TRUE, the target will
not be built when you press "Build Solution".

EXPORT_NAME
Exported name for target files.

This sets the name for the IMPORTED target generated when it this target is is exported. If not set, the
logical target name is used by default.

FOLDER
Set the folder name. Use to organize targets in an IDE.

Targets with no FOLDER property will appear as top level entities in IDEs like Visual Studio. Targets
with the same FOLDER property value will appear next to each other in a folder of that name. To nest
folders, use FOLDER values such as 'GUI/Dialogs' with '/' characters separating folder levels.

Fortran_FORMAT
Set to FIXED or FREE to indicate the Fortran source layout.

This property tells CMake whether the Fortran source files in a target use fixed-format or free-format.
CMake will pass the corresponding format flag to the compiler. Use the source-specific Fortran_FORMAT
property to change the format of a specific source file. If the variable CMAKE_Fortran_FORMAT is set
when a target is created its value is used to initialize this property.

Fortran_MODULE_DIRECTORY
Specify output directory for Fortran modules provided by the target.

If the target contains Fortran source files that provide modules and the compiler supports a module
output directory this specifies the directory in which the modules will be placed. When this property is
not set the modules will be placed in the build directory corresponding to the target's source directory.
If the variable CMAKE_Fortran_MODULE_DIRECTORY is set when a target is created its value is used to
initialize this property.

Note that some compilers will automatically search the module output directory for modules USEd during
compilation but others will not. If your sources USE modules their location must be specified by
INCLUDE_DIRECTORIES regardless of this property.

FRAMEWORK
Build SHARED library as Framework Bundle on the OS X and iOS.

If a SHARED library target has this property set to TRUE it will be built as a framework when built on
the OS X and iOS. It will have the directory structure required for a framework and will be suitable to
be used with the -framework option

To customize Info.plist file in the framework, use MACOSX_FRAMEWORK_INFO_PLIST target property.

For OS X see also the FRAMEWORK_VERSION target property.

Example of creation dynamicFramework:

add_library(dynamicFramework SHARED
dynamicFramework.c
dynamicFramework.h
)
set_target_properties(dynamicFramework PROPERTIES
FRAMEWORK TRUE
FRAMEWORK_VERSION C
MACOSX_FRAMEWORK_IDENTIFIER com.cmake.dynamicFramework
MACOSX_FRAMEWORK_INFO_PLIST Info.plist
PUBLIC_HEADER dynamicFramework.h
XCODE_ATTRIBUTE_CODE_SIGN_IDENTITY "iPhone Developer"
)

FRAMEWORK_VERSION
Version of a framework created using the FRAMEWORK target property (e.g. A).

This property only affects OS X, as iOS doesn't have versioned directory structure.

GENERATOR_FILE_NAME
Generator's file for this target.

An internal property used by some generators to record the name of the project or dsp file associated
with this target. Note that at configure time, this property is only set for targets created by
include_external_msproject().

GNUtoMS
Convert GNU import library (.dll.a) to MS format (.lib).

When linking a shared library or executable that exports symbols using GNU tools on Windows (MinGW/MSYS)
with Visual Studio installed convert the import library (.dll.a) from GNU to MS format (.lib). Both
import libraries will be installed by install(TARGETS) and exported by install(EXPORT) and export() to be
linked by applications with either GNU- or MS-compatible tools.

If the variable CMAKE_GNUtoMS is set when a target is created its value is used to initialize this
property. The variable must be set prior to the first command that enables a language such as project()
or enable_language(). CMake provides the variable as an option to the user automatically when
configuring on Windows with GNU tools.

HAS_CXX
Link the target using the C++ linker tool (obsolete).

This is equivalent to setting the LINKER_LANGUAGE property to CXX. See that property's documentation for
details.

IMPLICIT_DEPENDS_INCLUDE_TRANSFORM
Specify #include line transforms for dependencies in a target.

MYDIR(%)=<mydir/%>

will convert lines of the form

#include MYDIR(myheader.h)

#include <mydir/myheader.h>

allowing the dependency to be followed.

This property applies to sources in the target on which it is set.

IMPORTED_CONFIGURATIONS
Configurations provided for an IMPORTED target.

Set this to the list of configuration names available for an IMPORTED target. The names correspond to
configurations defined in the project from which the target is imported. If the importing project uses a
different set of configurations the names may be mapped using the MAP_IMPORTED_CONFIG_<CONFIG> property.
Ignored for non-imported targets.

IMPORTED_IMPLIB_<CONFIG>
<CONFIG>-specific version of IMPORTED_IMPLIB property.

Configuration names correspond to those provided by the project from which the target is imported.

IMPORTED_IMPLIB
Full path to the import library for an IMPORTED target.

Set this to the location of the ".lib" part of a windows DLL. Ignored for non-imported targets.

IMPORTED_LINK_DEPENDENT_LIBRARIES_<CONFIG>
<CONFIG>-specific version of IMPORTED_LINK_DEPENDENT_LIBRARIES.

Configuration names correspond to those provided by the project from which the target is imported. If
set, this property completely overrides the generic property for the named configuration.

IMPORTED_LINK_DEPENDENT_LIBRARIES
Dependent shared libraries of an imported shared library.

Shared libraries may be linked to other shared libraries as part of their implementation. On some
platforms the linker searches for the dependent libraries of shared libraries they are including in the
link. Set this property to the list of dependent shared libraries of an imported library. The list
should be disjoint from the list of interface libraries in the INTERFACE_LINK_LIBRARIES property. On
platforms requiring dependent shared libraries to be found at link time CMake uses this list to add
appropriate files or paths to the link command line. Ignored for non-imported targets.

IMPORTED_LINK_INTERFACE_LANGUAGES_<CONFIG>
<CONFIG>-specific version of IMPORTED_LINK_INTERFACE_LANGUAGES.

Configuration names correspond to those provided by the project from which the target is imported. If
set, this property completely overrides the generic property for the named configuration.

IMPORTED_LINK_INTERFACE_LANGUAGES
Languages compiled into an IMPORTED static library.

Set this to the list of languages of source files compiled to produce a STATIC IMPORTED library (such as
"C" or "CXX"). CMake accounts for these languages when computing how to link a target to the imported
library. For example, when a C executable links to an imported C++ static library CMake chooses the C++
linker to satisfy language runtime dependencies of the static library.

This property is ignored for targets that are not STATIC libraries. This property is ignored for
non-imported targets.

IMPORTED_LINK_INTERFACE_LIBRARIES_<CONFIG>
<CONFIG>-specific version of IMPORTED_LINK_INTERFACE_LIBRARIES.

Configuration names correspond to those provided by the project from which the target is imported. If
set, this property completely overrides the generic property for the named configuration.

This property is ignored if the target also has a non-empty INTERFACE_LINK_LIBRARIES property.

This property is deprecated. Use INTERFACE_LINK_LIBRARIES instead.

IMPORTED_LINK_INTERFACE_LIBRARIES
Transitive link interface of an IMPORTED target.

Set this to the list of libraries whose interface is included when an IMPORTED library target is linked
to another target. The libraries will be included on the link line for the target. Unlike the
LINK_INTERFACE_LIBRARIES property, this property applies to all imported target types, including STATIC
libraries. This property is ignored for non-imported targets.

This property is ignored if the target also has a non-empty INTERFACE_LINK_LIBRARIES property.

This property is deprecated. Use INTERFACE_LINK_LIBRARIES instead.

IMPORTED_LINK_INTERFACE_MULTIPLICITY_<CONFIG>
<CONFIG>-specific version of IMPORTED_LINK_INTERFACE_MULTIPLICITY.

If set, this property completely overrides the generic property for the named configuration.

IMPORTED_LINK_INTERFACE_MULTIPLICITY
Repetition count for cycles of IMPORTED static libraries.

This is LINK_INTERFACE_MULTIPLICITY for IMPORTED targets.

IMPORTED_LOCATION_<CONFIG>
<CONFIG>-specific version of IMPORTED_LOCATION property.

Configuration names correspond to those provided by the project from which the target is imported.

IMPORTED_LOCATION
Full path to the main file on disk for an IMPORTED target.

Set this to the location of an IMPORTED target file on disk. For executables this is the location of the
executable file. For bundles on OS X this is the location of the executable file inside Contents/MacOS
under the application bundle folder. For static libraries and modules this is the location of the
library or module. For shared libraries on non-DLL platforms this is the location of the shared library.
For frameworks on OS X this is the location of the library file symlink just inside the framework folder.
For DLLs this is the location of the ".dll" part of the library. For UNKNOWN libraries this is the
location of the file to be linked. Ignored for non-imported targets.

Projects may skip IMPORTED_LOCATION if the configuration-specific property IMPORTED_LOCATION_<CONFIG> is
set. To get the location of an imported target read one of the LOCATION or LOCATION_<CONFIG> properties.

IMPORTED_NO_SONAME_<CONFIG>
<CONFIG>-specific version of IMPORTED_NO_SONAME property.

Configuration names correspond to those provided by the project from which the target is imported.

IMPORTED_NO_SONAME
Specifies that an IMPORTED shared library target has no "soname".

Set this property to true for an imported shared library file that has no "soname" field. CMake may
adjust generated link commands for some platforms to prevent the linker from using the path to the
library in place of its missing soname. Ignored for non-imported targets.

IMPORTED
Read-only indication of whether a target is IMPORTED.

The boolean value of this property is True for targets created with the IMPORTED option to
add_executable() or add_library(). It is False for targets built within the project.

IMPORTED_SONAME_<CONFIG>
<CONFIG>-specific version of IMPORTED_SONAME property.

Configuration names correspond to those provided by the project from which the target is imported.

IMPORTED_SONAME
The "soname" of an IMPORTED target of shared library type.

Set this to the "soname" embedded in an imported shared library. This is meaningful only on platforms
supporting the feature. Ignored for non-imported targets.

IMPORT_PREFIX
What comes before the import library name.

Similar to the target property PREFIX, but used for import libraries (typically corresponding to a DLL)
instead of regular libraries. A target property that can be set to override the prefix (such as "lib")
on an import library name.

IMPORT_SUFFIX
What comes after the import library name.

Similar to the target property SUFFIX, but used for import libraries (typically corresponding to a DLL)
instead of regular libraries. A target property that can be set to override the suffix (such as ".lib")
on an import library name.

INCLUDE_DIRECTORIES
List of preprocessor include file search directories.

This property specifies the list of directories given so far to the target_include_directories() command.
In addition to accepting values from that command, values may be set directly on any target using the
set_property() command. A target gets its initial value for this property from the value of the
INCLUDE_DIRECTORIES directory property. Both directory and target property values are adjusted by calls
to the include_directories() command.

The value of this property is used by the generators to set the include paths for the compiler.

Relative paths should not be added to this property directly. Use one of the commands above instead to
handle relative paths.

INSTALL_NAME_DIR
Mac OSX directory name for installed targets.

INSTALL_NAME_DIR is a string specifying the directory portion of the "install_name" field of shared
libraries on Mac OSX to use in the installed targets.

INSTALL_RPATH
The rpath to use for installed targets.

A semicolon-separated list specifying the rpath to use in installed targets (for platforms that support
it). This property is initialized by the value of the variable CMAKE_INSTALL_RPATH if it is set when a
target is created.

INSTALL_RPATH_USE_LINK_PATH
Add paths to linker search and installed rpath.

INSTALL_RPATH_USE_LINK_PATH is a boolean that if set to true will append directories in the linker search
path and outside the project to the INSTALL_RPATH. This property is initialized by the value of the
variable CMAKE_INSTALL_RPATH_USE_LINK_PATH if it is set when a target is created.

INTERFACE_AUTOUIC_OPTIONS
List of interface options to pass to uic.

Targets may populate this property to publish the options required to use when invoking uic. Consuming
targets can add entries to their own AUTOUIC_OPTIONS property such as
$<TARGET_PROPERTY:foo,INTERFACE_AUTOUIC_OPTIONS> to use the uic options specified in the interface of
foo. This is done automatically by the target_link_libraries() command.

This property supports generator expressions. See the cmake-generator-expressions(7) manual for
available expressions.

INTERFACE_COMPILE_DEFINITIONS
List of public compile definitions requirements for a library.

Targets may populate this property to publish the compile definitions required to compile against the
headers for the target. The target_compile_definitions() command populates this property with values
given to the PUBLIC and INTERFACE keywords. Projects may also get and set the property directly.

When target dependencies are specified using target_link_libraries(), CMake will read this property from
all target dependencies to determine the build properties of the consumer.

Contents of INTERFACE_COMPILE_DEFINITIONS may use "generator expressions" with the syntax $<...>. See
the cmake-generator-expressions(7) manual for available expressions. See the cmake-buildsystem(7)
-manual for more on defining buildsystem properties.

INTERFACE_COMPILE_FEATURES
List of public compile features requirements for a library.

Targets may populate this property to publish the compile features required to compile against the
headers for the target. The target_compile_features() command populates this property with values given
to the PUBLIC and INTERFACE keywords. Projects may also get and set the property directly.

When target dependencies are specified using target_link_libraries(), CMake will read this property from
all target dependencies to determine the build properties of the consumer.

Contents of INTERFACE_COMPILE_FEATURES may use "generator expressions" with the syntax $<...>. See the
cmake-generator-expressions(7) manual for available expressions. See the cmake-buildsystem(7) -manual
for more on defining buildsystem properties.

See the cmake-compile-features(7) manual for information on compile features and a list of supported
compilers.

INTERFACE_COMPILE_OPTIONS
List of public compile options requirements for a library.

Targets may populate this property to publish the compile options required to compile against the headers
for the target. The target_compile_options() command populates this property with values given to the
PUBLIC and INTERFACE keywords. Projects may also get and set the property directly.

When target dependencies are specified using target_link_libraries(), CMake will read this property from
all target dependencies to determine the build properties of the consumer.

Contents of INTERFACE_COMPILE_OPTIONS may use "generator expressions" with the syntax $<...>. See the
cmake-generator-expressions(7) manual for available expressions. See the cmake-buildsystem(7) -manual
for more on defining buildsystem properties.

INTERFACE_INCLUDE_DIRECTORIES
List of public include directories requirements for a library.

Targets may populate this property to publish the include directories required to compile against the
headers for the target. The target_include_directories() command populates this property with values
given to the PUBLIC and INTERFACE keywords. Projects may also get and set the property directly.

When target dependencies are specified using target_link_libraries(), CMake will read this property from
all target dependencies to determine the build properties of the consumer.

Contents of INTERFACE_INCLUDE_DIRECTORIES may use "generator expressions" with the syntax $<...>. See
the cmake-generator-expressions(7) manual for available expressions. See the cmake-buildsystem(7)
-manual for more on defining buildsystem properties.

Include directories usage requirements commonly differ between the build-tree and the install-tree. The
BUILD_INTERFACE and INSTALL_INTERFACE generator expressions can be used to describe separate usage
requirements based on the usage location. Relative paths are allowed within the INSTALL_INTERFACE
expression and are interpreted relative to the installation prefix. For example:

target_include_directories(mylib INTERFACE
$<BUILD_INTERFACE:${CMAKE_CURRENT_SOURCE_DIR}/include/mylib>
$<INSTALL_INTERFACE:include/mylib> # <prefix>/include/mylib
)

Creating Relocatable Packages
Note that it is not advisable to populate the INSTALL_INTERFACE of the INTERFACE_INCLUDE_DIRECTORIES of a
target with absolute paths to the include directories of dependencies. That would hard-code into
installed packages the include directory paths for dependencies as found on the machine the package was
made on.

The INSTALL_INTERFACE of the INTERFACE_INCLUDE_DIRECTORIES is only suitable for specifying the required
include directories for headers provided with the target itself, not those provided by the transitive
dependencies listed in its INTERFACE_LINK_LIBRARIES target property. Those dependencies should
themselves be targets that specify their own header locations in INTERFACE_INCLUDE_DIRECTORIES.

See the Creating Relocatable Packages section of the cmake-packages(7) manual for discussion of
additional care that must be taken when specifying usage requirements while creating packages for
redistribution.

INTERFACE_LINK_LIBRARIES
List public interface libraries for a library.

This property contains the list of transitive link dependencies. When the target is linked into another
target using the target_link_libraries() command, the libraries listed (and recursively their link
interface libraries) will be provided to the other target also. This property is overridden by the
LINK_INTERFACE_LIBRARIES or LINK_INTERFACE_LIBRARIES_<CONFIG> property if policy CMP0022 is OLD or unset.

Contents of INTERFACE_LINK_LIBRARIES may use "generator expressions" with the syntax $<...>. See the
cmake-generator-expressions(7) manual for available expressions. See the cmake-buildsystem(7) manual for
more on defining buildsystem properties.

Creating Relocatable Packages
Note that it is not advisable to populate the INTERFACE_LINK_LIBRARIES of a target with absolute paths to
dependencies. That would hard-code into installed packages the library file paths for dependencies as
found on the machine the package was made on.

INTERFACE_POSITION_INDEPENDENT_CODE
Whether consumers need to create a position-independent target

The INTERFACE_POSITION_INDEPENDENT_CODE property informs consumers of this target whether they must set
their POSITION_INDEPENDENT_CODE property to ON. If this property is set to ON, then the
POSITION_INDEPENDENT_CODE property on all consumers will be set to ON. Similarly, if this property is
set to OFF, then the POSITION_INDEPENDENT_CODE property on all consumers will be set to OFF. If this
property is undefined, then consumers will determine their POSITION_INDEPENDENT_CODE property by other
means. Consumers must ensure that the targets that they link to have a consistent requirement for their
INTERFACE_POSITION_INDEPENDENT_CODE property.

INTERFACE_SOURCES
List of interface sources to compile into consuming targets.

Targets may populate this property to publish the sources for consuming targets to compile. The
target_sources() command populates this property with values given to the PUBLIC and INTERFACE keywords.
Projects may also get and set the property directly.

When target dependencies are specified using target_link_libraries(), CMake will read this property from
all target dependencies to determine the sources of the consumer.

Contents of INTERFACE_SOURCES may use "generator expressions" with the syntax $<...>. See the
cmake-generator-expressions(7) manual for available expressions. See the cmake-buildsystem(7) manual for
more on defining buildsystem properties.

INTERFACE_SYSTEM_INCLUDE_DIRECTORIES
List of public system include directories for a library.

Targets may populate this property to publish the include directories which contain system headers, and
therefore should not result in compiler warnings. The target_include_directories(SYSTEM) command
signature populates this property with values given to the PUBLIC and INTERFACE keywords.

Projects may also get and set the property directly, but must be aware that adding directories to this
property does not make those directories used during compilation. Adding directories to this property
marks directories as SYSTEM which otherwise would be used in a non-SYSTEM manner. This can appear
similar to 'duplication', so prefer the high-level target_include_directories(SYSTEM) command and avoid
setting the property by low-level means.

When target dependencies are specified using target_link_libraries(), CMake will read this property from
all target dependencies to mark the same include directories as containing system headers.

Contents of INTERFACE_SYSTEM_INCLUDE_DIRECTORIES may use "generator expressions" with the syntax $<...>.
See the cmake-generator-expressions(7) manual for available expressions. See the cmake-buildsystem(7)
manual for more on defining buildsystem properties.

INTERPROCEDURAL_OPTIMIZATION_<CONFIG>
Per-configuration interprocedural optimization for a target.

This is a per-configuration version of INTERPROCEDURAL_OPTIMIZATION. If set, this property overrides the
generic property for the named configuration.

INTERPROCEDURAL_OPTIMIZATION
Enable interprocedural optimization for a target.

If set to true, enables interprocedural optimizations if they are known to be supported by the compiler.

IOS_INSTALL_COMBINED
Build a combined (device and simulator) target when installing.

When this property is set to set to false (which is the default) then it will either be built with the
device SDK or the simulator SDK depending on the SDK set. But if this property is set to true then the
target will at install time also be built for the corresponding SDK and combined into one library.

This feature requires at least Xcode version 6.

JOB_POOL_COMPILE
Ninja only: Pool used for compiling.

The number of parallel compile processes could be limited by defining pools with the global JOB_POOLS
property and then specifying here the pool name.

For instance:

set_property(TARGET myexe PROPERTY JOB_POOL_COMPILE ten_jobs)

This property is initialized by the value of CMAKE_JOB_POOL_COMPILE.

JOB_POOL_LINK
Ninja only: Pool used for linking.

The number of parallel link processes could be limited by defining pools with the global JOB_POOLS
property and then specifing here the pool name.

For instance:

set_property(TARGET myexe PROPERTY JOB_POOL_LINK two_jobs)

This property is initialized by the value of CMAKE_JOB_POOL_LINK.

LABELS
Specify a list of text labels associated with a target.

Target label semantics are currently unspecified.

<LANG>_COMPILER_LAUNCHER
This property is implemented only when <LANG> is C or CXX.

Specify a ;-list containing a command line for a compiler launching tool. The Makefile Generators and the
Ninja generator will run this tool and pass the compiler and its arguments to the tool. Some example
tools are distcc and ccache.

This property is initialized by the value of the CMAKE_<LANG>_COMPILER_LAUNCHER variable if it is set
when a target is created.

<LANG>_INCLUDE_WHAT_YOU_USE
This property is implemented only when <LANG> is C or CXX.

Specify a ;-list containing a command line for the include-what-you-use tool. The Makefile Generators
and the Ninja generator will run this tool along with the compiler and report a warning if the tool
reports any problems.

This property is initialized by the value of the CMAKE_<LANG>_INCLUDE_WHAT_YOU_USE variable if it is set
when a target is created.

<LANG>_VISIBILITY_PRESET
Value for symbol visibility compile flags

The <LANG>_VISIBILITY_PRESET property determines the value passed in a visibility related compile option,
such as -fvisibility= for <LANG>. This property affects compilation in sources of all types of targets
(subject to policy CMP0063).

This property is initialized by the value of the CMAKE_<LANG>_VISIBILITY_PRESET variable if it is set
when a target is created.

LIBRARY_OUTPUT_DIRECTORY_<CONFIG>
Per-configuration output directory for LIBRARY target files.

This is a per-configuration version of the LIBRARY_OUTPUT_DIRECTORY target property, but
multi-configuration generators (VS, Xcode) do NOT append a per-configuration subdirectory to the
specified directory. This property is initialized by the value of the
CMAKE_LIBRARY_OUTPUT_DIRECTORY_<CONFIG> variable if it is set when a target is created.

Contents of LIBRARY_OUTPUT_DIRECTORY_<CONFIG> may use generator expressions.

LIBRARY_OUTPUT_DIRECTORY
Output directory in which to build LIBRARY target files.

This property specifies the directory into which library target files should be built. The property
value may use generator expressions. Multi-configuration generators (VS, Xcode) append a
per-configuration subdirectory to the specified directory unless a generator expression is used.

This property is initialized by the value of the variable CMAKE_LIBRARY_OUTPUT_DIRECTORY if it is set
when a target is created.

See also the LIBRARY_OUTPUT_DIRECTORY_<CONFIG> target property.

LIBRARY_OUTPUT_NAME_<CONFIG>
Per-configuration output name for LIBRARY target files.

This is the configuration-specific version of the LIBRARY_OUTPUT_NAME target property.

LIBRARY_OUTPUT_NAME
Output name for LIBRARY target files.

This property specifies the base name for library target files. It overrides OUTPUT_NAME and
OUTPUT_NAME_<CONFIG> properties.

See also the LIBRARY_OUTPUT_NAME_<CONFIG> target property.

LINK_DEPENDS_NO_SHARED
Do not depend on linked shared library files.

Set this property to true to tell CMake generators not to add file-level dependencies on the shared
library files linked by this target. Modification to the shared libraries will not be sufficient to
re-link this target. Logical target-level dependencies will not be affected so the linked shared
libraries will still be brought up to date before this target is built.

This property is initialized by the value of the variable CMAKE_LINK_DEPENDS_NO_SHARED if it is set when
a target is created.

LINK_DEPENDS
Additional files on which a target binary depends for linking.

Specifies a semicolon-separated list of full-paths to files on which the link rule for this target
depends. The target binary will be linked if any of the named files is newer than it.

This property is ignored by non-Makefile generators. It is intended to specify dependencies on "linker
scripts" for custom Makefile link rules.

LINKER_LANGUAGE
Specifies language whose compiler will invoke the linker.

For executables, shared libraries, and modules, this sets the language whose compiler is used to link the
target (such as "C" or "CXX"). A typical value for an executable is the language of the source file
providing the program entry point (main). If not set, the language with the highest linker preference
value is the default. See documentation of CMAKE_<LANG>_LINKER_PREFERENCE variables.

If this property is not set by the user, it will be calculated at generate-time by CMake.

LINK_FLAGS_<CONFIG>
Per-configuration linker flags for a target.

This is the configuration-specific version of LINK_FLAGS.

LINK_FLAGS
Additional flags to use when linking this target.

The LINK_FLAGS property can be used to add extra flags to the link step of a target. LINK_FLAGS_<CONFIG>
will add to the configuration <CONFIG>, for example, DEBUG, RELEASE, MINSIZEREL, RELWITHDEBINFO.

LINK_INTERFACE_LIBRARIES_<CONFIG>
Per-configuration list of public interface libraries for a target.

This is the configuration-specific version of LINK_INTERFACE_LIBRARIES. If set, this property completely
overrides the generic property for the named configuration.

This property is overridden by the INTERFACE_LINK_LIBRARIES property if policy CMP0022 is NEW.

This property is deprecated. Use INTERFACE_LINK_LIBRARIES instead.

Creating Relocatable Packages
Note that it is not advisable to populate the LINK_INTERFACE_LIBRARIES_<CONFIG> of a target with absolute
paths to dependencies. That would hard-code into installed packages the library file paths for
dependencies as found on the machine the package was made on.

LINK_INTERFACE_LIBRARIES
List public interface libraries for a shared library or executable.

By default linking to a shared library target transitively links to targets with which the library itself
was linked. For an executable with exports (see the ENABLE_EXPORTS target property) no default
transitive link dependencies are used. This property replaces the default transitive link dependencies
with an explicit list. When the target is linked into another target using the target_link_libraries()
command, the libraries listed (and recursively their link interface libraries) will be provided to the
other target also. If the list is empty then no transitive link dependencies will be incorporated when
this target is linked into another target even if the default set is non-empty. This property is
initialized by the value of the CMAKE_LINK_INTERFACE_LIBRARIES variable if it is set when a target is
created. This property is ignored for STATIC libraries.

This property is overridden by the INTERFACE_LINK_LIBRARIES property if policy CMP0022 is NEW.

This property is deprecated. Use INTERFACE_LINK_LIBRARIES instead.

Creating Relocatable Packages
Note that it is not advisable to populate the LINK_INTERFACE_LIBRARIES of a target with absolute paths to
dependencies. That would hard-code into installed packages the library file paths for dependencies as
found on the machine the package was made on.

LINK_INTERFACE_MULTIPLICITY_<CONFIG>
Per-configuration repetition count for cycles of STATIC libraries.

This is the configuration-specific version of LINK_INTERFACE_MULTIPLICITY. If set, this property
completely overrides the generic property for the named configuration.

LINK_INTERFACE_MULTIPLICITY
Repetition count for STATIC libraries with cyclic dependencies.

When linking to a STATIC library target with cyclic dependencies the linker may need to scan more than
once through the archives in the strongly connected component of the dependency graph. CMake by default
constructs the link line so that the linker will scan through the component at least twice. This
property specifies the minimum number of scans if it is larger than the default. CMake uses the largest
value specified by any target in a component.

LINK_LIBRARIES
List of direct link dependencies.

This property specifies the list of libraries or targets which will be used for linking. In addition to
accepting values from the target_link_libraries() command, values may be set directly on any target using
the set_property() command.

The value of this property is used by the generators to set the link libraries for the compiler.

Contents of LINK_LIBRARIES may use "generator expressions" with the syntax $<...>. See the
cmake-generator-expressions(7) manual for available expressions. See the cmake-buildsystem(7) manual for
more on defining buildsystem properties.

LINK_SEARCH_END_STATIC
End a link line such that static system libraries are used.

Some linkers support switches such as -Bstatic and -Bdynamic to determine whether to use static or shared
libraries for -lXXX options. CMake uses these options to set the link type for libraries whose full
paths are not known or (in some cases) are in implicit link directories for the platform. By default
CMake adds an option at the end of the library list (if necessary) to set the linker search type back to
its starting type. This property switches the final linker search type to -Bstatic regardless of how it
started.

This property is initialized by the value of the variable CMAKE_LINK_SEARCH_END_STATIC if it is set when
a target is created.

PROPERTIES ON TESTS

ATTACHED_FILES_ON_FAIL
Attach a list of files to a dashboard submission if the test fails.

Same as ATTACHED_FILES, but these files will only be included if the test does not pass.

ATTACHED_FILES
Attach a list of files to a dashboard submission.

Set this property to a list of files that will be encoded and submitted to the dashboard as an addition
to the test result.

COST
Set this to a floating point value. Tests in a test set will be run in descending order of cost.

This property describes the cost of a test. You can explicitly set this value; tests with higher COST
values will run first.

DEPENDS
Specifies that this test should only be run after the specified list of tests.

Set this to a list of tests that must finish before this test is run.

ENVIRONMENT
Specify environment variables that should be defined for running a test.

If set to a list of environment variables and values of the form MYVAR=value those environment variables
will be defined while running the test. The environment is restored to its previous state after the test
is done.

FAIL_REGULAR_EXPRESSION
If the output matches this regular expression the test will fail.

If set, if the output matches one of specified regular expressions, the test will fail. Example:

set_tests_properties(mytest PROPERTIES
FAIL_REGULAR_EXPRESSION "[^a-z]Error;ERROR;Failed"
)

FAIL_REGULAR_EXPRESSION expects a list of regular expressions.

LABELS
Specify a list of text labels associated with a test.

The list is reported in dashboard submissions.

MEASUREMENT
Specify a CDASH measurement and value to be reported for a test.

If set to a name then that name will be reported to CDASH as a named measurement with a value of 1. You
may also specify a value by setting MEASUREMENT to "measurement=value".

PASS_REGULAR_EXPRESSION
The output must match this regular expression for the test to pass.

If set, the test output will be checked against the specified regular expressions and at least one of the
regular expressions has to match, otherwise the test will fail. Example:

set_tests_properties(mytest PROPERTIES
PASS_REGULAR_EXPRESSION "TestPassed;All ok"
)

PASS_REGULAR_EXPRESSION expects a list of regular expressions.

PROCESSORS
How many process slots this test requires

Denotes the number of processors that this test will require. This is typically used for MPI tests, and
should be used in conjunction with the ctest_test PARALLEL_LEVEL option.

REQUIRED_FILES
List of files required to run the test.

If set to a list of files, the test will not be run unless all of the files exist.

RESOURCE_LOCK
Specify a list of resources that are locked by this test.

If multiple tests specify the same resource lock, they are guaranteed not to run concurrently.

RUN_SERIAL
Do not run this test in parallel with any other test.

Use this option in conjunction with the ctest_test PARALLEL_LEVEL option to specify that this test should
not be run in parallel with any other tests.

SKIP_RETURN_CODE
Return code to mark a test as skipped.

Sometimes only a test itself can determine if all requirements for the test are met. If such a situation
should not be considered a hard failure a return code of the process can be specified that will mark the
test as "Not Run" if it is encountered.

TIMEOUT
How many seconds to allow for this test.

This property if set will limit a test to not take more than the specified number of seconds to run. If
it exceeds that the test process will be killed and ctest will move to the next test. This setting takes
precedence over CTEST_TEST_TIMEOUT.

WILL_FAIL
If set to true, this will invert the pass/fail flag of the test.

This property can be used for tests that are expected to fail and return a non zero return code.

WORKING_DIRECTORY
The directory from which the test executable will be called.

If this is not set it is called from the directory the test executable is located in.

PROPERTIES ON SOURCE FILES

ABSTRACT
Is this source file an abstract class.

A property on a source file that indicates if the source file represents a class that is abstract. This
only makes sense for languages that have a notion of an abstract class and it is only used by some tools
that wrap classes into other languages.

AUTOUIC_OPTIONS
Additional options for uic when using AUTOUIC

By default it is empty.

The options set on the .ui source file may override AUTOUIC_OPTIONS set on the target.

AUTORCC_OPTIONS
Additional options for rcc when using AUTORCC

By default it is empty.

The options set on the .qrc source file may override AUTORCC_OPTIONS set on the target.

COMPILE_DEFINITIONS
Preprocessor definitions for compiling a source file.

The COMPILE_DEFINITIONS property may be set to a semicolon-separated list of preprocessor definitions
using the syntax VAR or VAR=value. Function-style definitions are not supported. CMake will
automatically escape the value correctly for the native build system (note that CMake language syntax may
require escapes to specify some values). This property may be set on a per-configuration basis using the
name COMPILE_DEFINITIONS_<CONFIG> where <CONFIG> is an upper-case name (ex.
"COMPILE_DEFINITIONS_DEBUG").

CMake will automatically drop some definitions that are not supported by the native build tool. The VS6
IDE does not support definition values with spaces (but NMake does). Xcode does not support
per-configuration definitions on source files.

CMake does not reject these values outright because they do work in some cases. Use with caution.

COMPILE_FLAGS
Additional flags to be added when compiling this source file.

These flags will be added to the list of compile flags when this source file builds. Use
COMPILE_DEFINITIONS to pass additional preprocessor definitions.

EXTERNAL_OBJECT
If set to true then this is an object file.

If this property is set to true then the source file is really an object file and should not be compiled.
It will still be linked into the target though.

Fortran_FORMAT
Set to FIXED or FREE to indicate the Fortran source layout.

This property tells CMake whether a given Fortran source file uses fixed-format or free-format. CMake
will pass the corresponding format flag to the compiler. Consider using the target-wide Fortran_FORMAT
property if all source files in a target share the same format.

GENERATED
Is this source file generated as part of the build process.

If a source file is generated by the build process CMake will handle it differently in terms of
dependency checking etc. Otherwise having a non-existent source file could create problems.

HEADER_FILE_ONLY
Is this source file only a header file.

A property on a source file that indicates if the source file is a header file with no associated
implementation. This is set automatically based on the file extension and is used by CMake to determine
if certain dependency information should be computed.

KEEP_EXTENSION
Make the output file have the same extension as the source file.

If this property is set then the file extension of the output file will be the same as that of the source
file. Normally the output file extension is computed based on the language of the source file, for
example .cxx will go to a .o extension.

LABELS
Specify a list of text labels associated with a source file.

This property has meaning only when the source file is listed in a target whose LABELS property is also
set. No other semantics are currently specified.

LANGUAGE
What programming language is the file.

A property that can be set to indicate what programming language the source file is. If it is not set
the language is determined based on the file extension. Typical values are CXX C etc. Setting this
property for a file means this file will be compiled. Do not set this for headers or files that should
not be compiled.

LOCATION
The full path to a source file.

A read only property on a SOURCE FILE that contains the full path to the source file.

MACOSX_PACKAGE_LOCATION
Place a source file inside a Application Bundle (MACOSX_BUNDLE), Core Foundation Bundle (BUNDLE), or
Framework Bundle (FRAMEWORK). It is applicable for OS X and iOS.

Executable targets with the MACOSX_BUNDLE property set are built as OS X or iOS application bundles on
Apple platforms. Shared library targets with the FRAMEWORK property set are built as OS X or iOS
frameworks on Apple platforms. Module library targets with the BUNDLE property set are built as OS X
CFBundle bundles on Apple platforms. Source files listed in the target with this property set will be
copied to a directory inside the bundle or framework content folder specified by the property value. For
OS X Application Bundles the content folder is <name>.app/Contents. For OS X Frameworks the content
folder is <name>.framework/Versions/<version>. For OS X CFBundles the content folder is
<name>.bundle/Contents (unless the extension is changed). See the PUBLIC_HEADER, PRIVATE_HEADER, and
RESOURCE target properties for specifying files meant for Headers, PrivateHeaders, or Resources
directories.

OBJECT_DEPENDS
Additional files on which a compiled object file depends.

Specifies a ;-list of full-paths to files on which any object files compiled from this source file
depend. On Makefile Generators and the Ninja generator an object file will be recompiled if any of the
named files is newer than it. Visual Studio Generators and the Xcode generator cannot implement such
compilation dependencies.

This property need not be used to specify the dependency of a source file on a generated header file that
it includes. Although the property was originally introduced for this purpose, it is no longer
necessary. If the generated header file is created by a custom command in the same target as the source
file, the automatic dependency scanning process will recognize the dependency. If the generated header
file is created by another target, an inter-target dependency should be created with the
add_dependencies() command (if one does not already exist due to linking relationships).

OBJECT_OUTPUTS
Additional outputs for a Makefile rule.

Additional outputs created by compilation of this source file. If any of these outputs is missing the
object will be recompiled. This is supported only on Makefile generators and will be ignored on other
generators.

SYMBOLIC
Is this just a name for a rule.

If SYMBOLIC (boolean) is set to true the build system will be informed that the source file is not
actually created on disk but instead used as a symbolic name for a build rule.

VS_DEPLOYMENT_CONTENT
Mark a source file as content for deployment with a Windows Phone or Windows Store application when built
with a Visual Studio generator. The value must evaluate to either 1 or 0 and may use generator
expressions to make the choice based on the build configuration. The .vcxproj file entry for the source
file will be marked either DeploymentContent or ExcludedFromBuild for values 1 and 0, respectively.

VS_DEPLOYMENT_LOCATION
Specifies the deployment location for a content source file with a Windows Phone or Windows Store
application when built with a Visual Studio generator. This property is only applicable when using
VS_DEPLOYMENT_CONTENT. The value represent the path relative to the app package and applies to all
configurations.

VS_SHADER_ENTRYPOINT
Specifies the name of the entry point for the shader of a .hlsl source file.

VS_SHADER_FLAGS
Set additional VS shader flags of a .hlsl source file.

VS_SHADER_MODEL
Specifies the shader model of a .hlsl source file. Some shader types can only be used with recent shader
models

VS_SHADER_TYPE
Set the VS shader type of a .hlsl source file.

VS_XAML_TYPE
Mark a XAML source file as a different type than the default Page. The most common usage would be to set
the default App.xaml file as ApplicationDefinition.

WRAP_EXCLUDE
Exclude this source file from any code wrapping techniques.

Some packages can wrap source files into alternate languages to provide additional functionality. For
example, C++ code can be wrapped into Java or Python etc using SWIG etc. If WRAP_EXCLUDE is set to true
(1 etc) that indicates that this source file should not be wrapped.

XCODE_EXPLICIT_FILE_TYPE
Set the Xcode explicitFileType attribute on its reference to a source file. CMake computes a default
based on file extension but can be told explicitly with this property.

PROPERTIES ON CACHE ENTRIES

ADVANCED
True if entry should be hidden by default in GUIs.

This is a boolean value indicating whether the entry is considered interesting only for advanced
configuration. The mark_as_advanced() command modifies this property.

HELPSTRING
Help associated with entry in GUIs.

This string summarizes the purpose of an entry to help users set it through a CMake GUI.

MODIFIED
Internal management property. Do not set or get.

This is an internal cache entry property managed by CMake to track interactive user modification of
entries. Ignore it.

STRINGS
Enumerate possible STRING entry values for GUI selection.

For cache entries with type STRING, this enumerates a set of values. CMake GUIs may use this to provide
a selection widget instead of a generic string entry field. This is for convenience only. CMake does
not enforce that the value matches one of those listed.

TYPE
Widget type for entry in GUIs.

Cache entry values are always strings, but CMake GUIs present widgets to help users set values. The GUIs
use this property as a hint to determine the widget type. Valid TYPE values are:

BOOL = Boolean ON/OFF value.
PATH = Path to a directory.
FILEPATH = Path to a file.
STRING = Generic string value.
INTERNAL = Do not present in GUI at all.
STATIC = Value managed by CMake, do not change.
UNINITIALIZED = Type not yet specified.

Generally the TYPE of a cache entry should be set by the command which creates it (set, option,
find_library, etc.).

VALUE
Value of a cache entry.

This property maps to the actual value of a cache entry. Setting this property always sets the value
without checking, so use with care.

PROPERTIES ON INSTALLED FILES

   CPACK_DESKTOP_SHORTCUTS
       Species a list of shortcut names that should be created on the Desktop for this file.

       The property is currently only supported by the WIX generator.

   CPACK_NEVER_OVERWRITE
       Request that this file not be overwritten on install or reinstall.

       The property is currently only supported by the WIX generator.

   CPACK_PERMANENT
       Request that this file not be removed on uninstall.

       The property is currently only supported by the WIX generator.

   CPACK_START_MENU_SHORTCUTS
       Species a list of shortcut names that should be created in the Start Menu for this file.

       The property is currently only supported by the WIX generator.

   CPACK_STARTUP_SHORTCUTS
       Species a list of shortcut names that should be created in the Startup folder for this file.

       The property is currently only supported by the WIX generator.

   CPACK_WIX_ACL
       Specifies access permissions for files or directories installed by a WiX installer.

       The property can contain multiple list entries, each of which has to match the following format.

          <user>[@<domain>]=<permission>[,<permission>]

       <user>  and  <domain>  specify  the  windows user and domain for which the <Permission> element should be
       generated.

       <permission> is any of the YesNoType attributes listed here:

          http://wixtoolset.org/documentation/manual/v3/xsd/wix/permission.html

DEPRECATED PROPERTIES ON DIRECTORIES

   COMPILE_DEFINITIONS_<CONFIG>
       Ignored.  See CMake Policy CMP0043.

       Per-configuration preprocessor definitions in a directory.

       This is the configuration-specific version of COMPILE_DEFINITIONS where <CONFIG> is  an  upper-case  name
       (ex. COMPILE_DEFINITIONS_DEBUG).

       This property will be initialized in each directory by its value in the directory's parent.

       Contents of COMPILE_DEFINITIONS_<CONFIG> may use "generator expressions" with the syntax $<...>.  See the
       cmake-generator-expressions(7) manual for available expressions.  See the cmake-buildsystem(7) manual for
       more on defining buildsystem properties.

       Generator expressions should be preferred instead of setting this property.

DEPRECATED PROPERTIES ON TARGETS

   COMPILE_DEFINITIONS_<CONFIG>
       Ignored.  See CMake Policy CMP0043.

       Per-configuration preprocessor definitions on a target.

       This  is  the  configuration-specific version of COMPILE_DEFINITIONS where <CONFIG> is an upper-case name
       (ex. COMPILE_DEFINITIONS_DEBUG).

       Contents of COMPILE_DEFINITIONS_<CONFIG> may use "generator expressions" with the syntax $<...>.  See the
       cmake-generator-expressions(7) manual for available expressions.  See the cmake-buildsystem(7) manual for
       more on defining buildsystem properties.

       Generator expressions should be preferred instead of setting this property.

   POST_INSTALL_SCRIPT
       Deprecated install support.

       The PRE_INSTALL_SCRIPT and POST_INSTALL_SCRIPT properties are the old way to specify CMake scripts to run
       before and after installing a target.  They are used only when the old INSTALL_TARGETS command is used to
       install the target.  Use the INSTALL command instead.

   PRE_INSTALL_SCRIPT
       Deprecated install support.

       The PRE_INSTALL_SCRIPT and POST_INSTALL_SCRIPT properties are the old way to specify CMake scripts to run
       before and after installing a target.  They are used only when the old INSTALL_TARGETS command is used to
       install the target.  Use the INSTALL command instead.

DEPRECATED PROPERTIES ON SOURCE FILES

   COMPILE_DEFINITIONS_<CONFIG>
       Ignored.  See CMake Policy CMP0043.

       Per-configuration preprocessor definitions on a source file.

       This is the configuration-specific version of COMPILE_DEFINITIONS.  Note  that  Xcode  does  not  support
       per-configuration source file flags so this property will be ignored by the Xcode generator.

COPYRIGHT

       2000-2016 Kitware, Inc.